Search results for "INTERFACE"
showing 10 items of 2139 documents
The effect of substrate roughness on the static friction of CuO nanowires
2012
Abstract The dependence of static friction on surface roughness was measured for copper oxide nanowires on silicon wafers coated with amorphous silicon. The surface roughness of the substrate was varied to different extent by the chemical etching of the substrates. For friction measurements, the nanowires (NWs) were pushed by an atomic-force microscope (AFM) tip at one end of the NW until complete displacement of the NW was achieved. The elastic bending profile of a NW during this manipulation process was used to calculate the ultimate static friction force. A strong dependence of static friction on surface roughness was demonstrated. The real contact area and interfacial shear strength wer…
Morphosynthesis of Strontianite Nanowires Using Polyacrylate Templates Tethered onto Self-Assembled Monolayers
2005
Strontianite nanowires have been synthesized on self-assembled monolayers (SAM) in the presence of polyacrylate templates. The morphology of this product exhibits characteristic differences from that of products obtained in the absence of polyacrylate. It is demonstrated that the template-induced crystallization process involves the interaction between the SAM surface, polyacrylate (a dissolved polyelectrolyte), and the cations/anions in solution. By the combination of these components, hierarchically ordered mineral hybrid structures are formed.
Enhancement of photoconversion efficiency in dye-sensitized solar cells exploiting pulsed laser deposited niobium pentoxide blocking layers
2015
Abstract Among all the photovoltaic technologies developed so far, dye-sensitized solar cells are considered as a promising alternative to the expensive and environmentally unfriendly crystalline silicon-based solar cells. One of the possible strategies employed to increase their photovoltaic efficiency is to reduce the charge recombination at the cell conductive substrate through the use of a compact blocking layer. In this paper, we report on the fabrication and characterization of dye-sensitized solar cells employing niobium pentoxide (Nb 2 O 5 ) thin film blocking layer deposited through the pulsed laser deposition technique on conductive substrates. The careful selection of the optimal…
Interface Models for the Analysis of Time-Dependent Effects in Masonry Structures
2001
The present paper is devoted to the theoretical formulation and numerical implementation of an interface model suitable to simulate the behavior of cementitious joints at long term. The interface laws are formulated in the framework of viscoplasticity for non standard materials in order to simulate the time-dependent softening response which occurs along the decohesion process in presence of shear and tension tractions. The interface model parameters identification is discussed on the base of experimental data reported in the literature. The optimization problem related to the parameters evaluation is approached by a heuristic algorithm. Finally some examples show the capabilities of the pr…
Tunable morphologies of ZnO films via the solution precursor plasma spray process for improved photocatalytic degradation performance
2018
Abstract The Solution Precursor Plasma Spray (SPPS) process is a novel, versatile and one-step route for building photocatalytic films. Herein, the influence of the precursor solution composition on the microstructure and on the properties of ZnO films prepared via the SPPS process was studied. Nanostructured ZnO particles (i.e. nanorods (NRs) and nanowires (NWs)) were obtained by using a solution of pure Zn(OAc)2 rather than pure Zn(NO3)2. Upon adding urea to the Zn(NO3)2 solution, NRs structured ZnO films were formed as well. The addition of acetic acid into the Zn(OAc)2 solution led to a damage of the nanostructured morphologies likely due to the inhibition of the zinc-containing cluster…
ReaxFF molecular dynamics simulation study of nanoelectrode lithography oxidation process on silicon (100) surface
2019
Abstract The nanoelectrode lithography has been strengthened in recent years as one of the most promising methods due to its high reproducibility, low cost and ability to manufacture nano-sized structures. In this work, the mechanism and the parametric influence in nanoelectrode lithography have been studied qualitatively in atomic scale using ReaxFF MD simulation. This approach was originally developed by van Duin and co-workers to investigate hydrocarbon chemistry. We have investigated the water adsorption and dissociation processes on Si (100) surface as well as the characteristics (structure, chemical composition, morphology, charge distribution, etc.) of the oxide growth. The simulatio…
Effects of electrolyte doping on electrodeposited nanostructured manganese oxide and chromium oxide
2020
Abstract Electrolyte additions are used to control the functionality of a nanostructured oxide. Dopant ions affect the size and shape of deposit crystallites and modify the host structure. Such ions can be incorporated into the deposit or form a separate oxide phase. The manganese dioxide family of polymorphs with ion-molecular sieve properties represents the additional possibilities of “template” effects of dopant ions on the phase composition, heterovalent substitution in the cationic sublattice, changes in morphology and alteration of nanocrystallite size during electrocrystallisation. The effects of electrolyte doping in electrodeposited, non-stoichiometric manganese dioxide (NH4+, Li+ …
Laser heating and ablation at high repetition rate in thermal confinement regime
2006
International audience; Laser heating and ablation of materials with low absorption and thermal conductivity (paint and cement) were under experimental and theoretical investigations. The experiments were made with a high repetition rate Q-switched Nd:YAG laser (10 kHz, 90 ns pulse duration and l = 532 nm). High repetition rate laser heating resulted in pulse per pulse heat accumulation. A theoretical model of laser heating was developed and demonstrated a good agreement between the experimental temperatures measured with the infrared pyrometer and the calculated ones. With the fixed wavelength and laser pulse duration, the ablation threshold fluence of paint was found to depend on the repe…
Optical modeling of nickel-base alloys oxidized in pressurized water reactor
2012
International audience; The knowledge of the aging process involved in the primary water of pressurized water reactor entails investigating a mixed growth mechanism in the corrosion of nickel-base alloys. A mixed growth induces an anionic inner oxide and a cationic diffusion parallel to a dissolution-precipitation process forms the outer zone. The in situ monitoring of the oxidation kinetics requires the modeling of the oxide layer stratification with the full knowledge of the optical constants related to each component. Here, we report the dielectric constants of the alloys 600 and 690 measured by spectroscopic ellipsometry and fitted to a Drude-Lorentz model. A robust optical stratificati…
Laser densification of organic coating: Effects of laser wavelength, operating parameters and substrate properties
2012
International audience; Mechanical bonding and interface behaviour play a key role for any materials deposited on different substrates. Usually, a post-spray heat treatment is required to improve the coating morphology and to enhance mechanical properties of thermal-sprayed polymeric coating. The effects of YAG, CO2 and diode laser radiations on as-sprayed PEEK coating deposited on stainless steel and aluminum substrates were investigated. The results revealed a good coating densification and interface behavior. A correlation between coating and substrate absorption coefficients, their thermophysical properties and laser operating parameters was shown. Besides, the finite element modeling b…