Search results for "IONIZATION"
showing 10 items of 1255 documents
Single-Event Burnout Mechanisms in SiC Power MOSFETs
2018
Heavy ion-induced single-event burnout (SEB) is investigated in high-voltage silicon carbide power MOSFETs. Experimental data for 1200-V SiC power MOSFETs show a significant decrease in SEB onset voltage for particle linear energy transfers greater than 10 MeV/cm 2 /mg, above which the SEB threshold voltage is nearly constant at half of the rated maximum operating voltage for these devices. TCAD simulations show a parasitic bipolar junction transistor turn-on mechanism, which drives the avalanching of carriers and leads to runaway drain current, resulting in SEB. peerReviewed
First demonstration of Doppler-free 2-photon in-source laser spectroscopy at the ISOLDE-RILIS
2020
Abstract Collinear Doppler-free 2-photon resonance ionization has been applied inside a hot cavity laser ion source environment at CERN-ISOLDE. An injection-seeded Ti:sapphire ring laser was used to generate light pulses with a Fourier-limited linewidth for high-resolution spectroscopy. Using a molybdenum foil as a reflective surface positioned at the end of the target transfer line, rubidium was successfully ionized inside the hot cavity. The results are presented alongside previously obtained data from measurements performed at the RISIKO mass separator at Mainz University, where collinear and perpendicular ionization geometries were tested inside an RFQ ion guide. This work is a pre-curs…
Collisional ionization as a sensitive detection scheme in collinear laser-fast-beam spectroscopy
1986
Abstract State-selective collisional ionization of fast atomic beams is used to detect optical pumping. Counting of these ions is superior in sensitivity by several orders of magnitude to the conventional fluorescence detection, provided that the energy levels involved in the optical pumping process are sufficiently well separated. A straightforward application is envisaged in the collinear laser-fast-beam spectroscopy of rare-gas isotopes far from stability of which only very weak beams are available from on-line isotope separators.
A Search for Heavy Stable and Long-Lived Squarks and Sleptons in $e^+ e^-$ Collisions at Energies from 130 to 183 GeV
1998
A search for stable and long-lived heavy charged particles used the data taken by the DELPHI experiment at energies from 130 to 183 GeV. The Cherenkov light detected in the Ring Imaging Cherenkov Detector and the ionization loss measured in the Time Projection Chamber identify heavy particles from masses of 2 to nearly 89 GeV/c$^2$. Upper limits are given on the production cross-section and masses of sleptons, free squarks with a charge of $q = \pm 2/3e$ and hadronizing squarks. A search for stable and long-lived heavy charged particles used the data taken by the DELPHI experiment at energies from 130 to 183 GeV. The Cherenkov light detected in the Ring Imaging Cherenkov Detector and the io…
Dark photon dark matter in the presence of inhomogeneous structure
2020
Dark photon dark matter will resonantly convert into visible photons when the dark photon mass is equal to the plasma frequency of the ambient medium. In cosmological contexts, this transition leads to an extremely efficient, albeit short-lived, heating of the surrounding gas. Existing work in this field has been predominantly focused on understanding the implications of these resonant transitions in the limit that the plasma frequency of the Universe can be treated as being perfectly homogeneous, i.e. neglecting inhomogeneities in the electron number density. In this work we focus on the implications of heating from dark photon dark matter in the presence of inhomogeneous structure (which …
Observation and applications of single-electron charge signals in the XENON100 experiment
2014
The XENON100 dark matter experiment uses liquid xenon in a time projection chamber (TPC) to measure xenon nuclear recoils resulting from the scattering of dark matter Weakly Interacting Massive Particles (WIMPs). In this paper, we report the observation of single-electron charge signals which are not related to WIMP interactions. These signals, which show the excellent sensitivity of the detector to small charge signals, are explained as being due to the photoionization of impurities in the liquid xenon and of the metal components inside the TPC. They are used as a unique calibration source to characterize the detector. We explain how we can infer crucial parameters for the XENON100 experim…
Intercomparison measurements between accelerator and laser based mass spectrometry for ultra-trace determination of 41Ca in the 10−11–10−10 isotopic …
2005
Abstract Selective ultra-trace determination of the long-lived radioisotope 41 Ca has applications in environmental and biomedical research, as well as in cosmochemistry. We have conducted an intercomparison between the two currently available methods for measurement at these low (radio) activities: accelerator mass spectrometry (AMS) and resonance ionization mass spectrometry (RIMS). Three artificially produced 41 Ca samples, primarily of cosmochemical importance, with isotopic abundances in the range of 10 −11 –10 −10 were used and results of these measurements show good agreement between the two methods, within the experimental uncertainties.
Time-of-flight ERD with a 200mm2 Si3N4 window gas ionization chamber energy detector
2014
Abstract Low energy heavy ion elastic recoil detection work has been carried out in Jyvaskyla since 2009 using home made timing detectors, a silicon energy detector and a timestamping data acquisition setup forming a time-of-flight–energy telescope. In order to improve the mass resolution of the setup a new energy detector was designed to replace the silicon solid state detector, which suffered from radiation damage and had poor resolution for heavy recoils. In this paper the construction and operation of an isobutane filled gas ionization chamber with a 14 × 14 mm 2 100 nm thick silicon nitride window are described. In addition to greatly improved energy resolution for heavy ions, the dete…
Simulation studies of the laser ablation ion source at the SHIPTRAP setup
2020
Hyperfine interactions 241(1), 46 (2020). doi:10.1007/s10751-020-01708-0
Study of Low Work Function Materials for Hot Cavity Resonance Ionization Laser Ion Sources
2008
The selectivity of a hot cavity resonance ionization laser ion source (RILIS) is most often limited by contributions from competing surface ionization on the hot walls of the ionization cavity. In this article we present investigations on the properties of designated high-temperature, low-work function materials regarding their performance and suitability as cavity material for RILIS. Tungsten test cavities, impregnated with a mixture of barium oxide and strontium oxide (BaOSrO on W), or alternatively gadolinium hexaboride (GdB6) were studied in comparison to a standard tungsten RILIS cavity as being routinely used for hot cavity laser ionization at ISOLDE. Measurement campaigns took place …