Search results for "IPM"
showing 10 items of 1361 documents
TCT-441 Optical Coherence Tomography assessment of the implantation of Everolimus-Eluting Bioresorbable Scaffolds against angiographic assessment: th…
2016
Bioresorbable Vascular Scaffolds (BVS) are the newest generation of stents for use during Percutaneous Coronary Intervention. However, as history has demonstrated, each development in stent technology has been associated with its own specific complications. With BVS, there are reports that recoil is
The Revolution in Heart Valve Therapy: Focus on Novel Imaging Techniques in Intra-Procedural Guidance
2021
Transcatheter valvular interventions have undergone significant progress over the last years with novel treatment options in even complex valvular conditions. In conjunction with this development, ...
In-vitro assessment of centrifugal pumps for ventricular assist.
1990
Currently two major types of centrifugal pumps are commercially available for ventricular assist: the Biomedicus-cone (Group I) and the Centrimed-impeller pump (now Sarns 3M) (Group II). To compare them for blood trauma and hemolysis, an in-vitro experiment was designed with a Stockert roller pump as a standard control (Group III). The in-vitro circuit was constructed consisting of a pump head, electromagnetic flow probe, polyvinyl chloride tubing and a reservoir, identical for all groups. Human ACD blood was used for priming and was circulated with a flow rate of 2 L/min for 24 h. Blood samples were taken at 0, 1, 3, 6, 12, and 24 h and zero control values were subtracted from the resultin…
Following Hydrogen Cyanide in the Valencian Country (1907-1933): Risk, Accidents and Standards in Fumigation
2019
Abstract Pests had represented a major problem in agriculture for centuries, but the huge changes in the food chain around the late nineteenth century intensified their effects in a totally unprecedented way and many new chemical substances were introduced in the attempt to control them. In this paper I will focus on the implementation of hydrogen cyanide, a highly toxic pesticide which has not received particular consideration from researchers to date. I shall analyse the introduction of this pesticide in the Valencian Country and focus on the attention given to the safety of workers and consumers. I aim to examine the role of the poison in its different uses and analyse the impact of each…
Disposal Behavior of Used Masks during the COVID-19 Pandemic in the Moroccan Community: Potential Environmental Impact.
2021
The spread of coronavirus disease-2019 (COVID-19) levied on the Moroccan authorities to increase their mask production capacity, which reached up to 12 million facemask units produced per day. This increase in personal protective equipment (PPE) production and consumption is an efficient tool to address the spread of COVID-19. However, this results in more plastic and microplastic debris being added into the land and marine environments, which will harm the ecosystem, wildlife, and public health. Such a situation needs deep individual behavior observation and tracking, as well as an assessment of the potential environmental impact of this new type of waste. For this reason, we assessed the …
Disposable chlorine dioxide wipes for high-level disinfection in the ENT department: A systematic review
2020
Abstract Background Nasopharyngoscope reprocessing methods should be effective, rapid and reproducible with moderate cost. Tristel Trio Wipes system (TTWS) is a manual reprocessing method based on chlorine dioxide that has lately emerged in ENT department. This review aims to collect evidence on this system. Methods The PubMed, Web of Science and Cochrane Library databases were searched for all the studies on TTWS or one of its components. Data were grouped according to the study type. Results Ten articles were included in the review. TTWS ensured high-level disinfection in laboratory and clinical setting. Although the limitations of the manual systems, TTWS proved to be faster than automat…
A biomechanical evaluation of methods of distal humerus fracture fixation using locking compression plates versus conventional reconstruction plates.
2004
OBJECTIVES To examine the biomechanical behavior of 2 techniques of double-plate osteosynthesis for fractures of the adult distal humerus using conventional reconstruction plates and locking compression plates. DESIGN Basic science study. SETTING Experimental in vitro study. PATIENTS/PARTICIPANTS Forty fresh-frozen human distal humeri specimens. INTERVENTION Four matched groups with 10 humeri each, median age 74 years (46-95), were created using similar bone mineral density values. Two standard configurations of double-plate osteosynthesis (dorsal or 90 degrees configuration) with either conventional reconstruction plates or locking compression plates were studied for biomechanical properti…
Locked Plate Fixation and Intramedullary Nailing for Proximal Humerus Fractures: A Biomechanical Evaluation
2005
Background Internal fixation of proximal humeral fractures is associated with a considerable secondary malalignment rate. Fixed-angle implants have been suggested to increase the stability of fixation. Methods The biomechanical properties of four different implants were tested. These included an internal fixator with semi-elastic properties (reference), the Synthes T-plate, a locked plate with rigid properties and a spiral blade locked intramedullary nail (PHN). These implants were assessed in twenty-four osteotomized pairs of human cadaveric humeri. Specimens were subjected to two-hundred cycles of axial loading and torque followed by load to failure. Results The PHN had greater axial stif…
In-Stent Restenosis: Definition, Entity of the Problem, Etiopathogenesis and Treatment Options
2018
In-stent restenosis (ISR) still represents a frequent limitation of percutaneous coronary intervention despite the introduction of latest-generation drug-eluting stents (DES), drastically lowering the overall incidence of ISR. Thus, the treatment of DES ISR remains a real brainteaser for interventional cardiologists.
A nonlinear biomechanical model for evaluation of cerebrospinal fluid shunt systems.
1994
In view of complications arising from physical properties of cerebrospinal fluid shunts, a biomechanical model of hydrocephalus was set up to study in vivo parameters that may influence their function. These include: intracranial pressure, compliance and pulses, intrathoracic, intra-abdominal, and subcutaneous pressures, and the effects of siphonage and repeated valve flushing. Each of these factors was studied separately upon shunt implantation in the model. Results of testing of a sample low-pressure valve with antisiphon device conformed with consumer information in regard to valve opening pressure and pressure flow measurements. No customer information, however, was supplied concerning …