Search results for "IPM"
showing 10 items of 1361 documents
The effect of cement fixation on initial micromotion of the femoral component in condylar knee replacement
1992
Four fresh, cadaveric specimens were fitted with total knee replacements and mounted on a knee joint loading and measuring rig. Femoral component micromotion in the sagittal plane was measured with a transducer during flexion and extension of the specimen. Various condylar designs were used without and with cement. Movement followed a characteristic curve pattern and was less with cement fixation particularly for bone of low trabecular strength as determined by bone sample tests for stiffness. Cement fixation appears to be superior to cementless fixation.
Differences in Accuracy and Radiation Dose in Placement of Iliosacral Screws: Comparison between 3D and 2D Fluoroscopy
2022
Percutaneous iliosacral screw fixation is a widely accepted method of stabilizing the posterior pelvic ring. Recently developed tools such as 3D-navigated fluoroscopy and computed navigation seem to prevent a surgeon from conducting screw misplacement. The study aimed to comparatively assess the introduction of sacroiliac screw placement using 2D and 3D fluoroscopy in terms of accuracy and radiation exposure. Iliosacral screws were introduced in 37 patients using 2D (group N1) and in 36 patients using 3D fluoroscopy (group N2) techniques. Overall, 61 and 56 screws were introduced in groups N1 and N2, respectively. Screw placement accuracy was assessed using postoperative computed tomography…
In Vitro Study on Bone Heating during Drilling of the Implant Site: Material, Design and Wear of the Surgical Drill
2020
Objective: An in vitro study was made to compare mean thermal variation according to the material, design and wear of the surgical drills used during dental implant site preparation. Material and methods: Three study groups (stainless steel drills with straight blades
The interactive effects of various nitrogen fertiliser formulations applied to urine patches on nitrous oxide emissions in grassland
2017
AbstractPasture-based livestock agriculture is a major source of greenhouse gas (GHG) nitrous oxide (N2O). Although a body of research is available on the effect of urine patch N or fertiliser N on N2O emissions, limited data is available on the effect of fertiliser N applied to patches of urinary N, which can cover up to a fifth of the yearly grazed area. This study investigated whether the sum of N2O emissions from urine and a range of N fertilisers, calcium ammonium nitrate (CAN) or urea ± urease inhibitor ± nitrification inhibitor, applied alone (disaggregated and re-aggregated) approximated the N2O emission of urine and fertiliser N applied together (aggregated). Application of fertili…
THE SILICON PHOTOMULTIPLIER:AN IN-DEPTH ANALYSIS IN THE CONTINUOUS WAVE REGIME
2014
The Silicon Photomultiplier (SiPM) is a novel solid state photon counting detector consisting of a parallel array of avalanche photodiodes biased beyond their breakdown voltage. It has known a fast development in the last few years as a possible alternative to vacuum photomultiplier tubes (PMTs) and conventional avalanche photodiodes (APDs). Indeed, current research in photodetectors is directed toward an increasing miniaturization of the pixel size, thus both improving the spatial resolution and reducing the device dimensions. SiPMs show high photon detection efficiency in the visible and near infrared range, low power consumption, high gain, ruggedness, compact size, excellent single-phot…
Lessons learnt from the COVID-19 pandemic: results of EAHP survey on the future crisis preparedness of hospital pharmacies
2021
Aim The present survey aimed to collect information on the lessons learnt from the COVID-19 pandemic by hospital pharmacists. It focused on the shortages of health goods and the experiences of hospitals during the first phase of the crisis. Methods A 17-question survey was conducted by EAHP, looking at the experiences of hospital pharmacists during the COVD-19 pandemic. The survey ran from 16 September to 23 December 2020. Statistical analysis included backward stepwise logistic regression (BSLR), Pearson’s χ2 test, t-test and one-way ANOVA, as appropriate; p≤0.05 was considered statistically significant. Results 1466 hospital pharmacists answered the survey fully. 58%, 63% and 69% of them …
Signal to noise ratio measurements of silicon photomultipliers in the continuous wave regime
2014
We report on our signal to noise ratio (SNR) measurements carried out, in the continuous wave regime, on a novel class of silicon photomultipliers (SiPMs) fabricated in planar technology on silicon p-type substrate.
A silicon photomultiplier-based analog front-end for DC component rejection and pulse wave recording in photoplethysmographic applications
2022
The growing attention towards healthcare and the constant technological innovations in the field of semiconductor components have allowed a widespread availability of smaller devices, suitable to be worn and able to continuously acquire physiological signals. Wearable devices are, however, more prone to yield signals corrupted by artifacts caused by movement. This issue is particularly relevant in photoplethysmographic (PPG) applications where also, to exploit the whole dynamic range of the acquisition device, the DC component of the signal should be removed and the AC component amplified. In this context, we have designed and realized an analog front-end (AFE) suitable to be integrated wit…
Fracture and fatigue of titanium narrow dental implants: New trends in order to improve the mechanical response
2019
Sixty-four fractured commercially pure titanium (cp-Ti) narrow dental implants (NDIs) with similar macrogeometry and connection designs were studied after different implantation times in humans in order to determine their reliability and to evaluate the causes of the fracture. These NDIs were compared with other similar implants, made with alloyed titanium with 15% Zr and with 12% strained titanium. Original implants were tested under static and fatigue conditions, simulating the tri-axial loads in the mouth by means of a Bionix hydraulic test machine. Fractography was studied using field-emission scanning electron microscopy (FSEM). The results showed that cp-Ti NDI exhibits low strength f…
Active lighting applied to three-dimensional reconstruction of specular metallic surfaces by polarization imaging
2006
International audience; In the field of industrial vision, the three-dimensional inspection of highly reflective metallic objects is still a delicate task. We deal with a new automated three-dimensional inspection system based on polarization analysis. We first present an extension of the shape-from-polarization method for dielectric surfaces to metallic surfaces. Then, we describe what we believe to be a new way of solving the ambiguity concerning the normal orientation with an active lighting system. Finally, applications to shape-defect detection are discussed, and the efficiency of the system to discriminate defects on specular metallic objects made by stamping and polishing is presente…