Search results for "IRRADIANCE"

showing 10 items of 152 documents

A Preliminary Estimation of the Direct Ultraviolet Spectral Irradiance in Valencia (Spain): Comparison with Measured Values

2000

UVSPEC and SMARTS2 models have been used to estimate the UV spectral irradiance values in Valencia, Spain, and the results of these estimations have been compared with experimental measurements of direct irradiance at normal incidence obtained using an Optronic OL 754 in the 300-400 nm range. The relative RMSD and MBD parameters have been used to estimate the deviations of the modelled values with respect to the experimental values. The results indicate that the deviations are smaller when the SMARTS2 model is used with the appropriate aerosol coefficients.

RadiationRadiological and Ultrasound Technologymedicine.diagnostic_testbiologybusiness.industryRadiació ultravioladaRadiation dosePublic Health Environmental and Occupational HealthIrradianceGeneral Medicinebiology.organism_classificationmedicine.disease_causeAtmospheric sciencesAerosolOpticsSpectrophotometrymedicineUltraviolet irradiationRange (statistics)Environmental scienceRadiology Nuclear Medicine and imagingbusinessValenciaUltravioletRadiation Protection Dosimetry
researchProduct

A comparison of different one-diode models for the representation of I–V characteristic of a PV cell

2014

Predictive performance tools are an important factor in the success of any new technology because they permit demonstration of whether a system will be efficient and economically feasible. A reliable predictive tool should allow the designer to optimise system performance and to maximise the cost effectiveness of a system prior to installation. This article discusses the five main parametric models for photovoltaic (PV) systems available in the literature. The current–voltage characteristics of a photovoltaic module can be reproduced modelling the PV panel as an equivalent electrical circuit made of linear and non-linear components. The parameters describing such components are directly rel…

Renewable energyEngineeringSettore ING-IND/11 - Fisica Tecnica AmbientaleRenewable Energy Sustainability and the EnvironmentCost effectivenessbusiness.industryPV cellPhotovoltaic systemProcess (computing)IrradianceI–V characteristicSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciReliability engineeringlaw.inventionlawElectrical networkParametric modelSettore ING-IND/10 - Fisica Tecnica IndustrialeFive parameter modelRepresentation (mathematics)businessSimulationDiodeRenewable and Sustainable Energy Reviews
researchProduct

Thermal–infrared emissivities of natural surfaces: improvements on the experimental set-up and new measurements

2003

Ground measurements of thermal infrared emissivities of terrestrial surfaces are required to derive accurate temperatures from radiometric measurements, and also to apply and validate emissivity models using satellite sensor observations. This paper focuses on the demanding aspects that are involved in the field measurement of emissivity using the box method and a hand-held radiometer. Measuring emissivities in field conditions can be hampered by external factors such as wind and solar irradiance. This can increase the time spent on the field campaign but, most importantly, it can cause no-sense fluctuations between consecutive observations. Here we propose original developments for the exp…

Set (abstract data type)RadiometerThermal infraredField (physics)InstrumentationEmissivityGeneral Earth and Planetary SciencesEnvironmental scienceSatelliteSolar irradianceRemote sensingInternational Journal of Remote Sensing
researchProduct

Stability of the performance of thin film modules during one year of operation

2012

At the University of Agder in Grimstad, Southern Norway, a test bench for photovoltaic modules is in operation since December 2010. Currently, various c-Si as well as aSi, CIS and HIT modules are under investigation. This project is part of the Norwegian contribution to IEA PVPS Task13. The paper focuses on the stability of the modules' MPP-performance in the course of one year. For this purpose, data on the DC response are logged together with irradiance and module temperature at one-minute intervals. Data analysis is performed in monthly blocks. The modeling involves two steps. First, the short-circuit current is expressed as function of irradiance and module temperature. Then, the MPP po…

Set (abstract data type)Test benchbusiness.industryComputer sciencePhotovoltaic systemElectrical engineeringIrradianceFunction (mathematics)Air mass (solar energy)businessStability (probability)SimulationPower (physics)2012 38th IEEE Photovoltaic Specialists Conference
researchProduct

Planktothrix rubescens in freshwater reservoirs: remote sensing potentiality for mapping cell density

2012

Planktothrix rubescens is sadly famous for producing microcystins (MCs), which are powerful hepatotoxins. During the winter 2005/06, P. rubescens has been found in the Pozzillo, Nicoletti, Prizzi and Garcia reservoirs, Sicily; in 2008 it was also detected in SS. Trinita di Delia and Castello reservoirs. Indeed, during periods of low shortwave irradiance such as winter, when light weakly penetrates water column and the water cools, P. rubescens filaments float up to the surface, forming red-colored blooms. Ancillary meteorological measurements highlighted low air temperatures between two frosts in December 2007 and February 2008, with a simultaneous reduction in the incoming total solar radi…

Settore ICAR/03 - Ingegneria Sanitaria-AmbientaleSettore ICAR/02 - Costruzioni Idrauliche E Marittime E IdrologiaIrradiancePlanktothrix rubescens cells density LANDSAT MODIS MERIS Sentinel-2Water columnGeographyTemporal resolutionSatelliteEmpirical relationshipBloomShortwaveImage resolutionSettore ICAR/06 - Topografia E CartografiaRemote sensing
researchProduct

Indoor lighting quality: Effects of different wall colours

2016

This paper reports the results of measurements performed in a test room to investigate the impact of using different wall colours and light scenes on indoor lighting quality. Eye level spectral irradiances were measured for a user located inside the room and seated at a desk. These measurements allow the use of the Irradiance Toolbox, which makes it possible to calculate equivalent illuminances for the photopigments in the human eye. Moreover, the CIECAM02 colour appearance model was used to investigate the variations in hue and chroma values of the different wall colours when changing the light scene. The results demonstrate that there are significant variations in eye level spectral irra…

Settore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industryComputer science0211 other engineering and technologiesIrradianceCIECAM0202 engineering and technology03 medical and health sciences0302 clinical medicineOpticsQuality (physics)021105 building & constructionTest roomElectrical and Electronic EngineeringbusinessIndoor lighting CIECAM02 Colour appearance models Photopigments Spectral irradianceNon visual effects of light colour perception030217 neurology & neurosurgery
researchProduct

Apparato di commutazione

2012

La presente invenzione si riferisce ad un apparato di commutazione per il controllo e l'impostazione della configurazione circuitale dei pannelli di un modulo fotovoltaico.

Settore ING-IND/33 - Sistemi Elettrici Per L'EnergiaSettore ING-IND/31 - ElettrotecnicaRiconfigurazione di sistemi fotovoltaicipartial shading reconfigurable photovoltaic array irradiance electrical mismatch optimization reconfiguration algorithm mathematical model TCT SP interconnection dynamic array monitoring solar cell switching matrix MPPT
researchProduct

Rateless Codes Performance Analysis in Correlated Channel Model for GEO Free Space Optics Downlinks

2012

Settore ING-INF/03 - TelecomunicazioniFree Space Optics (FSO) technologies for satellite communications offer several advantages: wide bandwidth high rate capability immunity to electromagnetic interference and small equipment size. Thus they are suitable for inter-satellite links deep space communications and also for high data rate ground-to-satellite/satellite-to-ground communications. Nevertheless FSO links suffer impairments that cause power signal degradation at the receiver. Scattering and absorption cause power signal attenuations predictable by suitable deterministic models. Optical turbulence causes random irradiance fluctuations which can generate signal fading events and can thereby only be predicted by statistical models. Attenuation and fading events can corrupt FSO links and so it would be recommended to add mitigation error codes on the communication link. FSO channel can be described as an erasure channel: fading events can cause erasure errors. We have identified in rateless codes (RCs) a suitable solution to be employed in FSO links. RCs do not need feedback and they add a redundant coding on the source data that allows the receiver to recover the whole payload despite erasure errors. We implemented two different of rateless codes: Luby Transform (LT) and Raptor. We analyzed their performances on a simulated turbulent GEO FSO downlink (1 Gbps - OOK modulation) at a 106 μm wavelength and for different values of zenith angles. Assuming a plane-wave propagation and employing Hufnagel-Valley we modeled the downlink using: 1) a temporal correlated channel model based on Gamma-Gamma probability distribution and 2) an irradiance covariance function that we converted on a time function using Taylor frozen eddies hypothesis. Our new channel model is able to simulate irradiance fluctuations at different turbulence conditions as it will be shown in the full paper. We will also report performance results of LT and Raptor codes at overhead range varying between 0 and 50% and for different values of source packets.Settore ING-INF/01 - Elettronica
researchProduct

On the experimental validation of an improved five-parameter model for silicon photovoltaic modules

2012

Abstract This paper presents the experimental validation of a new five-parameter model capable of analytically describing the I–V characteristic of a silicon photovoltaic module for each generic condition of operative temperature and solar irradiance. The operating current calculated with the model was validated on the basis of a series of experimental measurements performed in the field on two commercial silicon photovoltaic panels connected to a set of nine constant values of the electrical load. In order to examine the panels working in almost steady-state conditions only the data-sets of the sunniest days from sunrise to sunset were used. Unfortunately the production spread of photovolt…

Silicon photovoltaic moduleExperimental validationOperative temperatureSettore ING-IND/11 - Fisica Tecnica AmbientaleMaterials scienceField (physics)SiliconElectrical loadRenewable Energy Sustainability and the Environmentbusiness.industryPhotovoltaic systemchemistry.chemical_elementMechanical engineeringI–V characteristicSolar irradianceSolar energySurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsSolar energychemistrybusinessConstant (mathematics)Five-parameter modelSolar Energy Materials and Solar Cells
researchProduct

Quantifying residential PV feed-in power in low voltage grids based on satellite-derived irradiance data with application to power flow calculations

2016

AbstractA scheme using satellite-derived irradiance measurements to model the feed-in power of residential photovoltaic (PV) systems in a low voltage distribution grid is described. It is validated against smart meter measurements from a test site with 12 residential PV systems in the city of Ulm, Germany, during May 2013 to December 2014. The PV feed-in power is simulated in a 15-min time resolution based on irradiance data derived from Meteosat Second Generation satellite images by the physically based retrieval scheme Heliosat-4. The PV simulation is based on the nominal power and location of the PV systems as provided by the distribution system operator. Orientation angles are taken fro…

Smart meter020209 energyCAMS radiation serviceIrradiance02 engineering and technology7. Clean energyMaximum power point trackinglaw.inventionMaterials Science(all)law0202 electrical engineering electronic engineering information engineeringGrid-connected photovoltaic power systemResidential photovoltaicGeneral Materials ScienceTransformerRemote sensingEarth observationRenewable Energy Sustainability and the EnvironmentPhotovoltaic systemDeutsches FernerkundungsdatenzentrumDistribution networkHeliosat methodLow voltage gridEnvironmental scienceAtmosphäreLow voltageNominal power (photovoltaic)Solar Energy
researchProduct