Search results for "IRRADIATION"

showing 10 items of 1012 documents

Photocatalytic H2 production over inverse opal TiO2 catalysts

2019

Abstract The influence of BiVO4 and CuO on the chemico-physical properties of TiO2-based systems is reported. The performances of these systems were investigated in the photocatalytic H2 production both under UV and solar light irradiation. The characterization data pointed out that the obtained TiO2 samples have highly porous inverse opal structures with interconnected macropores. Inverse opal TiO2 exhibited higher activity in the H2 production than the commercial TiO2 due to the peculiar porosity that allows photons to enter inside the photocatalyst. A further improvement in terms of photoactivity was verified by addition of increasing amounts of BiVO4. On the contrary a small CuO content…

Materials science02 engineering and technologyRadiationPorous structure010402 general chemistry01 natural sciencesCatalysisCatalysiCatalysisPhotocatalysiIrradiationPhotocatalysisWater splittingAbsorption (electromagnetic radiation)PorosityMacroporePhotonic effectChemistry (all)General ChemistryPorous structures021001 nanoscience & nanotechnology0104 chemical sciencesCharacterization (materials science)Chemical engineeringPhotocatalysisTitanium dioxideSettore CHIM/07 - Fondamenti Chimici Delle Tecnologie0210 nano-technologyPhotocatalysis; Photonic effect; Porous structures; Titanium dioxide; Water splitting; Catalysis; Chemistry (all)Catalysis Today
researchProduct

Carbon Fiber Composites Cured by γ-Radiation-Induced Polymerization of an Epoxy Resin Matrix

2008

The use of ionizing radiation in order to initiate polymerization of suitable monomers has found increased interest in the last two decades due to its several advantages. In this work, carbon fiber composites through gamma radiation polymerization of epoxy matrices have been produced for aerospace and advanced automotive applications. Composite samples were produced by irradiation at room temperature using different radiation doses and, as reference, thermal curing of the same epoxy resin formulations was also carried out. Furthermore, some irradiated samples were subjected to postirradiation thermal curing to complete the polymerization reactions. The properties of the cured materials were…

Materials scienceAbsorption of waterPolymers and PlasticsGeneral Chemical EngineeringOrganic ChemistryEpoxyThermal treatmentPolymerizationFlexural strengthvisual_artComposites Epoxy Mechanical properties Moisture absorption Radiation curing Thermal propertiesvisual_art.visual_art_mediumIrradiationComposite materialThermal analysisGlass transition
researchProduct

On thermal influence of laser beam irradiation on optical absorption of amorphous as-evaporated As2S3 films

1998

Abstract Photoinduced changes of the optical absorption in amorphous as-evaporated As 2 S 3 thin films are studied. Before the measurements films were kept at dark for more than two years. The long storage time ensured that the relaxational structural changes caused by the deposition process were absent. As a light source a CW unfocused 488.0 nm Ar laser line was used. The intensity of the laser beam was varied from rather low intensity values up to intensities which raised the temperature of the films above the glass transition temperature. Based on the behavior of the saturation values of the absorption we were able to state that the exposed As 2 S 3 films started to polymerize at 63–69°C…

Materials scienceAbsorption spectroscopybusiness.industryAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsAmorphous solidLight intensityOpticsIrradiationElectrical and Electronic EngineeringPhysical and Theoretical ChemistryThin filmbusinessGlass transitionAbsorption (electromagnetic radiation)Saturation (magnetic)Optics Communications
researchProduct

Irradiation of nuclear materials with laser-plasma filaments produced in air and deuterium by terrawatt (TW) laser pulses

2017

Materials scienceAcoustics and Ultrasonics02 engineering and technologyPlasma021001 nanoscience & nanotechnologyCondensed Matter PhysicsLaser01 natural sciences010305 fluids & plasmasSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialslaw.inventionDeuteriumlaw0103 physical sciencesIrradiationAtomic physics0210 nano-technologyJournal of Physics D: Applied Physics
researchProduct

Laser irradiation of carbon–tungsten materials

2014

Carbon–tungsten layers deposited on graphite by thermionic vacuum arc (TVA) were directly irradiated with a femtosecond terawatt laser. The morphological and structural changes produced in the irradiated area by different numbers of pulses were systematically explored, both along the spots and in their depths. Although micro-Raman and Synchrotron-x-ray diffraction investigations have shown no carbide formation, they have shown the unexpected presence of embedded nano-diamonds in the areas irradiated with high fluencies. Scanning electron microscopy images show a cumulative effect of the laser pulses on the morphology through the ablation process. The micro-Raman spatial mapping signalled an…

Materials scienceAcoustics and UltrasonicsScanning electron microscopeAnalytical chemistrychemistry.chemical_elementVacuum arcTungstenCondensed Matter PhysicsLaserSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialslaw.inventionCarbideX-ray photoelectron spectroscopychemistrylawFemtosecondIrradiationJournal of Physics D: Applied Physics
researchProduct

Wavelength influence on nitrogen insertion into titanium by nanosecond pulsed laser irradiation in air

2013

Abstract We studied in this work the influence of the wavelength (532 vs. 1064 nm) on the insertion of nitrogen in titanium targets by surface laser treatments in air. The laser pulses were of 5 ns and the irradiance was lower than 25 × 10 12  W/m 2 . Results obtained using a frequency-doubled Nd:YAG laser at 532 nm were compared with those previously reported for laser treatments at 1064 nm. Nuclear reaction analysis and micro-Raman spectroscopy were used for determining the composition and the structure of the surface layers, respectively. Results showed the lower efficiency of irradiation at 532 nm for nitrogen insertion, which is possible only above threshold conditions depending on bot…

Materials scienceAnalytical chemistryGeneral Physics and Astronomychemistry.chemical_elementSurfaces and InterfacesGeneral ChemistryCondensed Matter PhysicsLaserNitrogenSurfaces Coatings and Filmslaw.inventionSurface coatingsymbols.namesakechemistrylawNuclear reaction analysissymbolsIrradiationSpectroscopyRaman spectroscopyTitaniumApplied Surface Science
researchProduct

Silica nanoparticle core structure examined by the E?Si? center 29Si strong hyperfine interaction

2015

Abstract β-Ray irradiation up to 1.2 GGy was employed to induce E′Si γ defects and to study the structure of silica nanoparticles with diameters from 7 up to 20 nm. Defect concentration and their 29 Si strong hyperfine doublet were investigated through electron paramagnetic resonance measurements. Our data indicate that stable defects are located in the nanoparticle core. Furthermore, the E′Si γ hyperfine interaction evidences that the core structure is denser than bulk silica and independent from the particle size. Finally, we put in evidence that the core structure is stable and unaffected by the irradiation in the investigated dose range maintaining the specific features of nanoparticles.

Materials scienceAnalytical chemistryNanoparticleSilica nanoparticleCeramics and CompositeCondensed Matter PhysicMaterials Chemistry Metals and Alloyslaw.inventionSilica nanoparticleslawMaterials ChemistryIrradiationElectron paramagnetic resonanceHyperfine structureComputingMilieux_MISCELLANEOUSRange (particle radiation)Core-shell modelElectronic Optical and Magnetic MaterialSettore FIS/01 - Fisica Sperimentaleβ-Ray irradiation[CHIM.MATE]Chemical Sciences/Material chemistryCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsCore (optical fiber)Chemical physicsCeramics and CompositesParticle sizeElectron paramagnetic resonance
researchProduct

Low-K factor of SiO2 layer on Si irradiated by YAG:Nd laser

2007

Abstract The change of optical and electrical properties of SiO2 layer on Si single crystal exposed to YAG:Nd laser radiation has been found experimentally. The second harmonic of YAG:Nd laser was used as a source of light. Before irradiation the SiO2 layer with thickness 0.75 μm had red color in reflecting light due to the interference. After irradiation with the laser with intensity of more than 3.5 MW/cm2 red color changed to yellow. However, samples with thickness 0.21 μm did not change color after irradiation. We explain such peculiarities of optical properties by change of optical path. Capacity (C) measurements of SiO2 layer with thickness 0.21 μm by the method of capacity–voltage ch…

Materials scienceAnalytical chemistryRadiationCondensed Matter PhysicsLaserIndentation hardnessElectronic Optical and Magnetic Materialslaw.inventionOptical pathlawMaterials ChemistryCeramics and CompositesSurface roughnessIrradiationLayer (electronics)Single crystalJournal of Non-Crystalline Solids
researchProduct

Role ofH2Oin the thermal annealing of theEγ′center in amorphous silicon dioxide

2009

The model for the annealing of a radiation-induced point defect in silica, the ${\text{E}}_{\ensuremath{\gamma}}^{\ensuremath{'}}$ center, is identified in the temperature range $(150--550)\ifmmode^\circ\else\textdegree\fi{}\text{C}$. Thermal treatments in controlled atmospheres of water vapor, oxygen, or helium of irradiated amorphous silicon dioxide are carried out. Direct experimental evidences that the annealing of the ${\text{E}}_{\ensuremath{\gamma}}^{\ensuremath{'}}$ center is caused by a reaction with diffusing water molecules are found. A rate equation system describing this annealing process is inferred, and its solutions are compared with experimental data to obtain quantitative …

Materials scienceAnnealing (metallurgy)Analytical chemistrychemistry.chemical_elementRate equationActivation energyAtmospheric temperature rangeCondensed Matter PhysicsCrystallographic defectElectronic Optical and Magnetic MaterialsChemical kineticschemistryIrradiationHeliumPhysical Review B
researchProduct

Dielectric properties of reactor irradiated ferroelectric thin films

2001

Abstract Radiation effects in highly oriented Pb1Zr0.53Ti0.47O3 (PZT), Pb0.94La0.06Zr0.65Ti0.35O3 (PLZT-6), and PbiZriO3 (PZ) ferroelectric (FE) and antiferroelectric (AF) thin films are investigated in view of their possible application as a temperature sensitive element in a new bolometer system for ITER (International Thermonuclear Experimental Reactor). The dielectric properties (i.e. hysteresis loops, dielectric constants) of the films were investigated in a frequency range from 20 to 105 Hz and at temperatures up to 450 °C, before and after neutron irradiation to a neutron fluence of 5×1021 m−2 (E<0.1 MeV). The dielectric constant was measured during cooling with 1.7 °Cmin−1. The diel…

Materials scienceAnnealing (metallurgy)BolometerAnalytical chemistryDielectricCondensed Matter PhysicsFerroelectricityElectronic Optical and Magnetic Materialslaw.inventionNuclear magnetic resonanceControl and Systems EngineeringlawNeutron fluxMaterials ChemistryCeramics and CompositesAntiferroelectricityIrradiationElectrical and Electronic EngineeringThin filmIntegrated Ferroelectrics
researchProduct