Search results for "IRRADIATION"
showing 10 items of 1012 documents
A Time Projection Chamber with GEM-Based Readout
2016
For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented.
Photoconversion of F+ centers in neutron-irradiated MgO
2000
Abstract In neutron-irradiated MgO crystals, experiments and theory demonstrate that photon excitation of the positively charged anion vacancies (F+ centers) at 5.0 eV releases holes that are subsequently trapped at V-type centers, which are cation vacancies charge-compensated by impurities, such as Al3+, F−, and OH− ions. A photoconversion mechanism occurs very likely via electron transfer to F+ centers from the quasi-local states which are induced in the valence band. INDO quantum chemical simulations of F+ centers confirmed the appearance of two induced quasi-local states located at 1.2 and 2.0 eV below the top of the valence band.
Ion-induced hardening in LiF: Energy loss and fluence effects
2006
The behavior of hardening of LiF crystals irradiated with swift Au, Pb, Bi, Kr, Ni, Ti and S ions with a specific energy of 10 MeV/u is analyzed. The dispersion strengthening as the main mechanism of hardening is verified.
Fabrication of a negative PMMA master mold for soft-lithography by MeV ion beam lithography
2012
Abstract In this study, poly(methyl methacrylate) (PMMA) was investigated as a negative resist by irradiation with a high-fluence 2 MeV proton beam. The beam from a 1.7 MV Tandetron accelerator at the Plasma and Beam Physics Research Facility (PBP) of Chiang Mai University is shaped by a pair of computer-controlled L-shaped apertures which are used to expose rectangular pattern elements with 1–1000 μm side length. Repeated exposure of rectangular pattern elements allows a complex pattern to be built up. After subsequent development, the negative PMMA microstructure was used as a master mold for casting poly(dimethylsiloxane) (PDMS) following a standard soft-lithography process. The PDMS chi…
Tritium release from beryllium articles for use in fusion devices
2009
Abstract Results obtained on radiation and magnetic field (MF) effects on tritium release at annealing of the beryllium pebbles from the EXOTIC-8-3/13 irradiation are presented in this study and compared with those for other irradiated beryllium materials. Abundance ratios of chemical forms of tritium in the EXOTIC-8-3/13 beryllium pebbles were determined: T 2 – 65%, T 0 – 23%, T + – 12%. A complete detritiation of these pebbles was achieved at 1123 K for 240 min; MF of 2.35 T had no appreciable effect on the tritium release. At 991 K for 240 min, the degree of detritiation was 96.6% without MF; MF of 2.35 T decreased it to 86.7%. At 940 K for 47 min, the degree of detritiation was 60%, 5 M…
Site-selective luminescence study of defects. in gamma-irradiated glassy germanium dioxide
1996
Abstract Luminescence of γ-irradiated samples of GeO2 glass was studied using dye laser excitation in the wavelength region between 590 and 656 nm. An inhomogeneously broadened luminescence band with a peak around 1.86 eV, halfwidth of 0.16 eV and decay constant τ ≈ 5.1 μs was found. At temperatures below 20 K a resonance ZPL and a vibronic peak 710 cm−1 below the laser photon energy emerge when laser is tuned to energies between 1.95–1.89 eV. The site-selective luminescence spectra are qualitatively similar to those of the non-bridging oxygen hole center (NBOHC) in SiO2 glass and are attributed to NBOHC in glassy GeO2. The measured ratio between the energies of the observed local vibration…
Very high specific activity erbium 169Er production for potential receptor-targeted radiotherapy
2019
Erbium 169Er is one of the most interesting radiolanthanides for new potential receptor-targeted β− therapy applications due to its low energy β− emissions, very low intensity ɣ rays and the possibility to use 68Ga or 44Sc as companion for diagnostic in a theranostics approach. Currently it can be produced in reactors through the neutron activation of highly enriched 168Er. The low specific activity of the produced carrier-added 169Er is limiting its use for receptor-targeted therapy. Nonetheless it is used for radiosynoviorthesis of small joints. The aim of this work is to develop a new large-scale production method for the supply of very high specific activity 169Er. Highly enriched 168Er…
Angular and lateral spreading of ion beams in biomedical nuclear microscopy
2009
Abstract Nuclear scattering from target atoms gives rise to a spatial broadening of energetic ion beams penetrating matter. The spatial broadening of the ion beam presents an ultimate limit to the resolving power that can be achieved in nuclear microscopy methods. The pressing of the attainable resolution limit in biomedical nuclear microscopy to dimensions approaching 10 nm, or so, implies the fundamental limitation from ion-target scattering will become increasingly significant. This effect has been investigated by a combined analytical and numerical computational approach to determine the extent and how single and multiple scattering processes limit the resolution for analysis with 2 MeV…
Accumulation of radiation defects and products of radiolysis in lithium orthosilicate pebbles with silicon dioxide additions under action of high abs…
2012
Abstract One of the technological problems of a fusion reactor is the change in composition and structure of ceramic breeders (Li 4 SiO 4 or Li 2 TiO 3 pebbles) during long-term operation. In this study changes in the composition and microstructure of Li 4 SiO 4 pebbles with 2.5 wt% silicon dioxide additions, fabricated by a melt-spraying process, were investigated after fast electron irradiation ( E = 5 MeV, dose rate up to 88 MGy h −1 ) with high absorbed dose from 1.3 to 10.6 GGy at high temperature (543–573 K) in air and argon atmosphere. Three types of pebbles with different diameters and grain sizes were investigated. Products of radiolysis were studied by means of FTIR and XRD. TSL …
Radiation-induced effects in neutron- and electron-irradiated lithium silicate ceramic breeder pebbles
2020
Abstract Ceramic breeder (CB) pebbles consisting of lithium orthosilicate (Li4SiO4) as the main phase and lithium metasilicate (Li2SiO3) as a secondary phase were analysed with respect to radiation-induced defects and radiolysis products. Therefore, pebbles that were irradiated with neutrons in the so-called HICU experiment ( H igh neutron fluence i rradiation of pebble sta c ks for f u sion) were compared to pebbles irradiated with accelerated electrons and to an unirradiated sample. Fourier transformation infrared spectroscopy was used to investigate changes in the phase composition. Beside an expected increase in the second phase in the neutron-irradiated samples, no further significant …