Search results for "IRRADIATION"

Environmental degradation of polymers for cultural heritage

2018

Plastic materials are used both for the protection of cultural heritage and as material for artworks. As for other materials, the durability and the maintenance of their initial properties are fundamental for the use of these materials. For the protection of the cultural heritage (particularly for stone artworks) the main important properties are the hydrophobicity, the UV transparency and the water vapour permeability that must be maintained even after a long exposure to the environmental conditions (UV irradiation, rain, temperature variations, etc.). When the polymers are used for the production of an artwork, the most important characteristics are the maintenance of the aesthetical appe…

Nanostructured anatase TiO2 densified at high pressure as advanced visible light photocatalysts

2015

This study reports on characterization and photoactivity of nanostructured TiO2 samples, which have been permanently densified under high pressures, up to 2.1 GPa. Commercial Mirkat 211 anatase has been used as a benchmark sample, in order to investigate the effect of unidirectional high pressure on structural, optical and photocatalytic properties of TiO2. Vibrational Raman spectroscopy shows that the treatment does not cause transitions among the different crystalline phases of titanium dioxide. UV-vis diffuse reflectance spectra reveal that increasing pressure gives rise to a shift of the absorption onset towards higher wavelength enhancing the photoactivity under visible radiation. Samp…

N-Doped Anatase/Rutile Photocatalysts for the Synthesis of Aromatic Aldehydes Under Ultraviolet and Solar Irradiation

2015

N-doped anatase/rutile photocatalysts were prepared by a sol-gel method, using TiCl4 as TiO2 precursor and urea as N-dopant source. The catalysts required a thermal treatment at temperature higher than 300 degrees C to achieve actual nitrogen doping; this treatment also allowed obtaining crystalline and hydrophobic samples. Moreover, nitrogen doping modified the surface of samples by increasing the anatase to rutile phase ratio and hydrophilicity. The catalysts were characterized by BET specific surface area, XRD, ESEM, TGA, FT-IR, DRS and XPS measurements, with particular attention to the assessment of the N-doping effect. It was found that XPS analysis should be used together with DRS and…

Two-Dimensional Modeling of an Externally Irradiated Slurry Photoreactor

2013

Abstract A batch cylindrical photocatalytic reactor, externally irradiated by 1–6 UV fluorescent lamps and containing a stirred slurry of polycrystalline TiO2, was modeled by coupling a modified Langmuir–Hinshelwood kinetics together with a two-dimensional light intensity field. The radiation field has been determined on the main assumptions of diffuse radiation, isotropic scattering and negligible backward reflected photon flow. The model has been applied to the photocatalytic oxidation of organic substrates which do not undergo homogeneous photochemical degradation. The model is characterized by the following four parameters: the kinetic constants of substrate adsorption, desorption and d…

Enhancing Selectivity of Photocatalytic Synthesis of p-Anisaldehyde in Water under Solar Irradiation by N- Doped TiO2

2014

Assessment of Fatigue Effects Induced by Fast Beam Transients in the IFMIF-DONES Li Target

2020

One of the crucial steps toward the commercial exploitation of fusion energy is the availability of a high-intensity neutron source able to test and qualify structural materials to be used in future fusion power reactors. The International Fusion Materials Irradiation Facility-DEMO Oriented NEutron Source (IFMIF-DONES) facility, which is currently being designed within the framework of the EUROfusion Consortium, represents the European effort to develop such a neutron source. It employs a liquid lithium target struck by an accelerated deuteron (D+) beam to produce fusion-like neutrons used to irradiate materials samples. So far, a detailed investigation of the thermomechanical behavior of t…

Hydrodynamic Modeling of Accretion Impacts in Classical T Tauri Stars: Radiative Heating of the Pre-shock Plasma

2016

Context. It is generally accepted that, in classical T Tauri stars, the plasma from the circumstellar disc accretes onto the stellar surface with free-fall velocity and the impact generates a shock. The impact region is expected to contribute to emission in different spectral bands; many studies have confirmed that the X-rays arise from the post-shock plasma but, otherwise, there are no studies in the literature investigating the origin of the observed UV emission which is apparently correlated to accretion. Aims: We investigated the effect of radiative heating of the infalling material by the post-shock plasma at the base of the accretion stream, with the aim to identify in which region a …

Raman spectroscopy study of β-irradiated silica glass

2003

International audience; Natural and synthetic silica glass samples with different OH content have been submitted to β-irradiation at different doses from 106 to 5 × 109 Gy in a Van de Graaff accelerator. Structural changes under irradiation have been analyzed by Raman spectroscopy. The main findings are: (i) a decrease of the Si–O–Si angular dispersion and the average Si–O–Si angle as a function of dose and (ii) an increase of number of three-membered SiO4 ring concentration during irradiation. These results show therefore that purely electronic excitation from β-irradiation induces in a-SiO2 small but significant structural changes of the SiO4 membered ring statistics (size and dispersion)…

Defect-related visible luminescence of silica nanoparticles

2013

The high photon emissivity in the visible spectral range is one of the most relevant phenomena emerging from the reduction of silica down to nanoscale; hence it is promising for the development of optical nanotechnologies (down converter, probes, display). It is well accepted that the origin of this luminescence is related to the high specific surface (~100 m2/g) that favors the formation of optically active defects at the nanosilica surface. With the aim to clarify the role of specific luminescent defects, here we report a detailed study of spectral and decay features by time-resolved photoluminescence spectra under a visible-UV tunable laser excitation. Our study is carried out on differe…

β-ray irradiation effects on silica nanoparticles

2015

By electron paramagnetic resonance (EPR) measurements, we examine the amplitude of the signal typically due to a combination of NBOHC (Non Bridging Hole Center) and POR (Peroxy Radical) defects induced by β-ray irradiation (from 1.2 to 1200 MGy) in silica nanoparticles with diameter ranging from 7 to 20 nm. Our data indicate that the signal line-shapes recorded at different doses is quite independent from the particles sizes and from the dose. Furthermore, for each considered nanoparticles size, the concentration of defects is also almost constant with respect to dose, and it does not change significantly if measured after 2 or 9 months from the irradiation. By contrast, we observed that th…