Search results for "Icon"
showing 10 items of 3539 documents
Growth of polyaniline films on porous silicon layers
1993
Abstract The electrochemical deposition of electrically active polyaniline films (PANI) onto the surface of porous silicon (PS) layers formed at p- and n-type silicon wafers has been studied using cyclic voltammetry measurements and infrared spectroscopy. The process of PANI deposition is easier on the PS layers formed at n-Si wafers and essentially retarded at PS/p-Si samples, presumably due to a parallel reaction of oxygen evolution. The polymerization reaction starts at the pore bottoms and propagates towards the external surface of the PS layer. Electric conduction of PS/PANI composites is lower than of uncovered PS layers.
Tunability of Injection Seeded High-Repetition Rate Ti:Sapphire Laser Far Off the Gain Peak
2009
We have investigated a tunability of a high‐repetition rate Ti:Sapphire laser seeded off the gain peak. By applying a birefringent filter, the 7 kHz injection seeded Ti:Sapphire laser system was operated with the average seeding efficiency of over 90% and the output power of over 1 W on the spectral range of 900–930 nm. We conclude that the birefringent filter suited for widely tunable operation of the injection seeded Ti:Sapphire laser system operated at high repetition rate.
Electrical conductivity and magnetic bistability in metal–organic frameworks and coordination polymers: charge transport and spin crossover at the na…
2020
Materials scientists are currently shifting from purely inorganic, organic and silicon-based materials towards hybrid organic–inorganic materials to develop increasingly complex and powerful electronic devices. In this context, it is undeniable that conductive metal–organic frameworks (MOFs) and bistable coordination polymers (CPs) are carving a niche for themselves in the electronics world. The tunability and processability of these materials alongside the combination of electrical conductivity with porosity or spin transition offers unprecedented technological opportunities for their integration into functional devices. This review aims to summarise the chemical strategies tha…
Characterization and osteogenic activity of a silicatein/biosilica-coated chitosan-graft-polycaprolactone.
2014
Several attempts have been made in the past to fabricate hybrid materials that display the complementary properties of the polyester polycaprolactone (PCL) and the polysaccharide chitosan (CHS) for application in the field of bone regeneration and tissue engineering. However, such composites generally have no osteogenic activity per se. Here we report the synthesis of a chitosan-graft-polycaprolactone (CHS-g-PCL) and its subsequent characterization, including crystallinity, chemical structure and thermal stability. Upon surface-functionalization of CHS-g-PCL with osteogenic biosilica via the surface-immobilized enzyme silicatein, protein adsorption, surface morphology and wettability were a…
Histological and histomorphometrical analysis of a silica matrix embedded nanocrystalline hydroxyapatite bone substitute using the subcutaneous impla…
2010
The clinical suitability of a bone substitute material is determined by the ability to induce a tissue reaction specific to its composition. The aim of this in vivo study was to analyze the tissue reaction to a silica matrix-embedded, nanocrystalline hydroxyapatite bone substitute. The subcutaneous implantation model in Wistar rats was chosen to assess the effect of silica degradation on the vascularization of the biomaterial and its biodegradation within a time period of 6 months. Already at day 10 after implantation, histomorphometrical analysis showed that the vascularization of the implantation bed reached its peak value compared to all other time points. Both vessel density and vascula…
Experimental evidence of high spatial confinement of elastic energy in a phononic cantilever
2021
We report on experimental high spatial confinement of elastic energy in a silicon phononic cantilever for which the quality factor of a higher-order flexural resonance is increased by a factor of 27 (from Q ∼ 80 to Q ∼ 2130) with the use of a three-row phononic crystal (PnC) strip. As shown by numerical simulations performed with the finite element method, the PnC both reduces anchor loss and confines elastic energy inside the cantilever. The PnC and the cantilever are fabricated with standard clean room techniques on a silicon on insulator substrate. Optical measurements of the out-of-plane displacements are performed with a laser scanning interferometer in a frequency range around 2 MHz.
Sensing of the Molecular Spin in Spin-Crossover Nanoparticles with Micromechanical Resonators
2019
In the past years, the use of highly sensitive silicon microelectromechanical cantilevers has been proposed as a tool to characterize the spin-crossover phenomenon by employing fast optical readout of the motion. In this work, Fe II -based spin-crossover nanoparticles of the well-known [Fe(Htrz) 2 (trz)](BF 4 ) complex wrapped with thin silica shells of different sizes will be studied by means of silicon microresonators. The silica shell will enhance its chemical stability, whereas the low thickness will allow a proper mechanical coupling between the cantilever and the spin-crossover core. To maximize the sensing of the spin-crossover phenomena, different cantilever geometries and flexural…
Innovations in Extractive Phases for In-Tube Solid-Phase Microextraction Coupled to Miniaturized Liquid Chromatography: A Critical Review
2020
Over the past years, a great effort has been devoted to the development of new sorbents that can be used to pack or to coat extractive capillaries for in-tube solid-phase microextraction (IT-SPME). Many of those efforts have been focused on the preparation of capillaries for miniaturized liquid chromatography (LC) due to the reduced availability of capillary columns with appropriate dimensions for this kind of system. Moreover, many of the extractive capillaries that have been used for IT-SPME so far are segments of open columns from the gas chromatography (GC) field, but the phase nature and dimensions are very limited. In particular, polar compounds barely interact with stationary GC phas…
Polymeric carbon nitride (C3N4) as heterogeneous photocatalyst for selective oxidation of alcohols to aldehydes
2018
Abstract Polymeric carbon nitride (C3N4) is a semiconductor material which is a very promising green photocatalyst with good physico-chemical properties and stability. It is a metal-free carbon based non-toxic material which can be easily obtained from earth-abundant components. The robustness and versatility of C3N4 as a photo-redox catalyst allows its use for selective oxidations by heterogeneous photocatalysis. This paper reviews the state of art in the application of C3N4 as heterogeneous photocatalyst for selective oxidation of alcohols to the corresponding aldehydes.
Effect of alloying elements on the electronic properties of thin passive films formed on carbon steel, ferritic and austenitic stainless steels in a …
2014
The influence of alloying elements on the electrochemical and semiconducting properties of thin passive films formed on several steels (carbon steel, ferritic and austenitic stainless steels) has been studied in a highly concentrated lithium bromide (LiBr) solution at 25 °C, by means of potentiodynamic tests and Mott Schottky analysis. The addition of Cr to carbon steel promoted the formation of a p-type semiconducting region in the passive film. A high Ni contentmodified the electronic behaviour of highly alloyed austenitic stainless steels.Mo did notmodify the electronic structure of the passive films, but reduced the concentration of defects.