Search results for "Icon"

Fluorine laser-induced silicon hydride SiH groups in silica

2007

Abstract Formation and destruction of silicon hydride (Si–H) groups in silica by F 2 laser irradiation and their vacuum ultraviolet (VUV) optical absorption was examined by infrared (IR) and VUV spectroscopy. Photoinduced creation of Si–H groups in H 2 -impregnated oxygen deficient silica is accompanied by a growth of infrared absorption band at 2250 cm −1 and by a strong increase of VUV transmission at 7.9 eV. Photolysis of Si–H groups by 7.9 eV photons in this glass was not detected when the irradiation was performed at temperature 80 K. However, a slight destruction of Si–H groups under 7.9 eV irradiation was observed at the room temperature. This finding gives a tentative estimate of VU…

First Evidence of Tris(catecholato)silicate Formation from Hydrolysis of an Alkyl Bis(catecholato)silicate

2022

The hydrolysis of 3-ammoniumpropylbis(catecholato)silicate 1, giving two different silica-based materials containing different amounts of tris(catecholato)silicate, is reported. The latter species can be formed through an attack of catechol to the silicon atom in the pentacoordinate complex, in which the silicon-carbon bond is further activated toward electrophilic proton cleavage. The Knoevenagel reaction was used as a probe in order to test the availability of functional groups on the surface of such materials.

Proton conducting composite electrolytes based on antimonic acid

1997

Abstract This report concerns a composite proton electrolyte suitable for use in electrochromic devices. The electrolyte consists of nanosize pyrochlore antimonic acid particles suspended in a poly(vinyl acetate) matrix by a gel route. It was found possible to substitute the antimonic acid by inert oxides of aluminum and silicon, thus making the electrolyte less harmful to the oxide electrodes of the electrochromic devices without considerably decreasing the conductivity. The proton conductivity of the antimonic acid electrolyte was ∼10 −4 S/cm at room temperature, practically independent of its amount of absorbed water.

Synthesis and reactivity of .sigma.-bonded silicon metalloporphyrins. Spectroscopic characterization and electrochemistry of (P)Si(R)2, (P)Si(R)X, an…

1988

Organic Monolayers by B(C6F5)3-Catalyzed Siloxanation of Oxidized Silicon Surfaces

2017

Inspired by the homogeneous catalyst tris(pentafluorophenyl) borane [B(C6F5)3], which acts as a promotor of Si-H bond activation, we developed and studied a method of modifying silicon oxide surfaces using hydrosilanes with B(C6F5)3 as the catalyst. This dedihydrosiloxanation reaction yields complete surface coverage within 10 min at room temperature. Organic monolayers derived from hydrosilanes with varying carbon chain lengths (C8-C18) were prepared on oxidized Si(111) surfaces, and the thermal and hydrolytic stabilities of the obtained monolayers were investigated in acidic (pH 3) medium, basic (pH 11) medium, phosphate-buffered saline (PBS), and deionized water (neutral conditions) for …

Analysis of archaeological pottery by X-ray fluorescence spectrometry applying the limit dilution method

1994

A method for correcting the intensity of x-ray fluorescence (limit dilution method) is proposed for the analysis of samples with a complex matrix such as ceramic materials of archaeological interest. This method corrects the interelement effects, resolving the wide deviations which occur in the quantitative results obtained by x-ray fluorescence without correction. The contents of sodium, magnesium, aluminium, silicon, potassium, calcium, titanium and iron in sixteen archaeological ceramic samples of different origins and from different locations were determined. The results obtained are comparable to the values obtained by chemical analysis. A statistical study of the data was carried out …

Multiarm cyclam-grafted mesoporous silica: a strategy to improve the chemical stability of silica materials functionalized with amine ligands

2009

We have explored in this work the stability and the reactivity of multiarm cyclam-grafted mesoporous silica samples in aqueous solution. A series of hybrid materials have been prepared by grafting silylated cyclam molecules bearing one, two, or four silyl groups onto both amorphous silica gel (K60) and ordered mesoporous silica (SBA15). Under these conditions, cyclam moieties are attached to the silica walls via one, two, or four arms. Various physicochemical techniques have been applied to characterize the functionalized solids (elemental analysis, 1H-29Si and 1H-13C CPMAS NMR, and N2 adsorption-desorption isotherms). The interest in two and four arms for improving the chemical stability i…

The effects of intensity, frequency, static load, and shore hardness on different parameters in vibration sensitivity measurements.

1987

The effects of shore hardness, static load, frequency, and intensity of vibration on the amplitude and dynamic force effects of vibration were studied in conditions corresponding to those occurring in vibrotactile sensitivity measurements. The measurements were performed on three silicon plates of known shore hardness. The results indicated that the effect of differences in elasticity on the vibration amplitudes was evident at lower frequencies up to about 200 Hz whereas at higher frequencies the amplitudes remained at the same level, regardless of elasticity. On dynamic force the effect of elasticity was observed at all frequencies studied (50-500 Hz). The static load of the contractor had…

Broadband photocurrent enhancement in a-Si:H solar cells with plasmonic back reflectors

2014

The authors acknowledge Francesco Ruffino for the AFM measurements. This work was funded by the EU FP7 Marie Curie Action FP7-PEOPLE-2010-ITN through the PROPHET project (Grant No. 264687), the bilateral CNR/AVCR project "Photoresponse of nanostructures for advanced photovoltaic applications", the MIUR project Energetic (Grant no. PON02_00355_3391233) and by the Portuguese Science Foundation (FCT-MEC) through the Strategic Project PEst-C/CTM/LA0025/2013-14 and the research project PTDC/CTM-ENE/2514/2012. Plasmonic light trapping in thin film silicon solar cells is a promising route to achieve high efficiency with reduced volumes of semiconductor material. In this paper, we study the enhance…

Optical tweezing using tunable optical lattices along a few-mode silicon waveguide

2018

International audience; Fourteen years ago, optical lattices and holographic tweezers were considered as a revolution, allowing for trapping andmanipulating multiple particles at the same time using laser light. Since then, near-field optical forces have arousedtremendous interest as they enable efficient trapping of a wide range of objects, from living cells to atoms, in integrateddevices. Yet, handling at will multiple objects using a guided light beam remains a challenging task for current on-chipoptical trapping techniques. We demonstrate here on-chip optical trapping of dielectric microbeads and bacteria usingone-dimensional optical lattices created by near-field mode beating along a f…