Search results for "Inspection"
showing 10 items of 149 documents
Intentional weld defect process: From manufacturing by robotic welding machine to inspection using TFM phased array
2019
Specimens with intentionally embedded weld defects or flaws can be employed for training, development and research into procedures for mechanical property evaluation and structural integrity assessment. It is critical that the artificial defects are a realistic representation of the flaws produced by welding. Cylindrical holes, which are usually machined after welding, are not realistic enough for our purposes as it is known that they are easier to detect than the naturally occurring imperfections and cracks. Furthermore, it is usually impractical to machine a defect in a location similar to where the real weld defects are found. For example, electro-discharge machining can prod…
In-process calibration of a non-destructive testing system used for in-process inspection of multi-pass welding
2020
Abstract In multi-pass welding, there is increasing motivation to move towards in-process defect detection to enable real-time repair; thus avoiding deposition of more layers over a defective weld pass. All defect detection techniques require a consistent and repeatable approach to calibration to ensure that measured defect sizing is accurate. Conventional approaches to calibration employ fixed test blocks with known defect sizes, however, this methodology can lead to incorrect sizing when considering complex geometries, materials with challenging microstructure, and the significant thermal gradients present in materials during the inter-pass inspection period. To circumvent these challenge…
Comparative evaluation of sealing ability, penetration and adaptation of a self etching pit and fissure sealant- stereomicroscopic and scanning elect…
2019
Background The efficacy of pit and fissure sealants in preventing occlusal caries is a well-established fact. Considering the difficulty in achieving strict isolation for a longer duration while treating the pediatric patients, a simplified procedure of sealant application is desirable. While, a self-etching sealant, Prevent Seal offers a quick procedure, the physical properties of this material haven’t been studied yet. Thus, this study was aimed to comparatively evaluate sealing ability, penetration and adaptation of a self-etching pit and fissure sealant and a conventional resin sealant. Material and Methods This was an in vitrointergroup comparative study, which consisted of 2 groups- G…
An automated procedure for computing the packing properties of dense and locked sands by image analysis of thin sections
2014
The macroscopic mechanical behaviour of dense sands originates to a great extent from their microstructural characteristics such as the coordination number, the grain contact and the packing density indexes. The study of intergranular contacts and the reckoning of these indexes may be carried out on planar images of the grains either by means of time-consuming visual inspection assisted by CAD or by automatic image analysis. An innovative method for the automatic determination of microstructural characteristics of sands based on image analysis of thin section is proposed. Tests performed on a locked sand show that the proposed method is much more effective, convenient and faster than the us…
Actinic inspection of sub-50 nm EUV mask blank defects
2007
A new actinic mask inspection technology to probe nano-scaled defects buried underneath a Mo/Si multilayer reflection coating of an Extreme Ultraviolet Lithography mask blank has been implemented using EUV Photoemission Electron Microscopy (EUV-PEEM). EUV PEEM images of programmed defect structures of various lateral and vertical sizes recorded at around 13 nm wavelength show that 35 nm wide and 4 nm high buried line defects are clearly detectable. The imaging technique proves to be sensitive to small phase jumps enhancing the visibility of the edges of the phase defects which is explained in terms of a standing wave enhanced image contrast at resonant EUV illumination.
A new approach for actinic defect inspection of EUVL multilayer mask blanks: Standing wave photoemission electron microscopy
2006
Extreme ultraviolet lithography (EUVL) at 13.5 nm is the next generation lithography technique capable of printing sub-50 nm structures. With decreasing feature sizes to be printed, the requirements for the lithography mask also become more stringent in terms of defect sizes and densities that are still acceptable and the development of lithography optics has to go along with the development of new mask defect inspection techniques that are fast and offer high resolution (preferable in the range of the minimum feature size) at the same time. We report on the development and experimental results of a new 'at wavelength' full-field imaging technique for defect inspection of multilayer mask bl…
Heuristics for the Mixed Rural Postman Problem
2000
Abstract The Rural Postman Problem on a mixed graph (MRPP) consists of finding a minimum cost tour which traverses, at least once, the arcs and edges of a given subset of the arcs and edges of the graph. This problem is known to be NP-hard. This paper presents two heuristic approaches to solve it. An approximate algorithm based on the resolution of some flow and matching problems and a tabu search implementation is presented. The tabu search algorithm seeks high-quality tours by means of a switching mechanism in an intensification phase and two levels of diversification. Computational results are presented to assess the merits of the method. Scope and purpose Routing Problems arise in sever…
Linear Programming Based Methods for Solving Arc Routing Problems
2000
From the pioneering works of Dantzig, Edmonds and others, polyhedral (i.e. linear programming based) methods have been successfully applied to the resolution of many combinatorial optimization problems. See Junger, Reinelt & Rinaldi (1995) for an excellent survey on this topic. Roughly speaking, the method consists of trying to formulate the problem as a Linear Program and using the existing powerful methods of Linear Programming to solve it.
Robotic path planning for non-destructive testing – A custom MATLAB toolbox approach
2016
AbstractThe requirement to increase inspection speeds for non-destructive testing (NDT) of composite aerospace parts is common to many manufacturers. The prevalence of complex curved surfaces in the industry provides motivation for the use of 6 axis robots in these inspections. The purpose of this paper is to present work undertaken for the development of a KUKA robot manipulator based automated NDT system. A new software solution is presented that enables flexible trajectory planning to be accomplished for the inspection of complex curved surfaces often encountered in engineering production. The techniques and issues associated with conventional manual inspection techniques and automated s…
Application of deep convolutional neural networks for the detection of anthracnose in olives using VIS/NIR hyperspectral images
2021
Anthracnose is one of the primary diseases that affect olive production before and after harvest, causing severe damage and economic losses. The objective of this work is to detect this disease in the early stages, using hyperspectral images and advanced modelling techniques of Deep Learning (DL) and convolutional neural networks (CNN). The olives were artificially inoculated with the fungus. Hyperspectral images (450–1050 nm) of each olive were acquired until visual symptoms of the disease were observed, in some cases up to 9 days. The olives were classified into two classes: control, inoculated with water, and fungi composed of olives inoculated with the fungus. The ResNet101 architecture…