Search results for "Instrumentation"
showing 10 items of 4914 documents
Solar blind AlGaN photodetectors with a very high spectral selectivity
2006
Solar blind detectors based on AlGaN heterostructures grown on sapphire by Molecular Beam Epitaxy and with a dielectric interference filter deposited on the back side are demonstrated to provide record spectral selectivity. Rejection ratios of 2 x 10(4), and better than 5 x 10(4), measured between 280 and 320 nm, are achieved in Metal Semiconductor Metal detectors and Schottky diodes respectively. The whole detector process is fully compatible with low cost array fabrication.
Substitution–dilution method to correct the matrix effect in multi-element quantitative analysis by X-ray fluorescence
2001
Abstract A mathematical model based on the dilution–addition method (DAM) for multi-elemental analysis using an X-ray fluorescence technique is proposed. The conditions for sample preparation do not require both the unknown and standard samples to be similar in composition and mineralogy, and the unknown sample is replaced quantitatively by the standard sample, hence the denomination substitution–dilution method (SDM). This method makes it possible to correct the matrix effect in multi-elemental quantitative analysis by X-ray fluorescence for each analyte. The proposed model presents hyperbolic behaviour of the experimental data when the X-ray fluorescence intensities are represented versus…
Advanced Monitoring Systems Based on Battery-Less Asset Tracking Modules Energized through RF Wireless Power Transfer
2020
Asset tracking involving accurate location and transportation data is highly suited to wireless sensor networks (WSNs) featuring battery-less nodes that can be deployed in virtually any environment and require little or no maintenance. In response to the growing demand for advanced battery-less sensor tag solutions, this article presents a system for identifying and monitoring the speeds of assets in a WSN with battery-less tags that receive all their operating energy through radio frequency (RF) wireless power transfer (WPT) architecture, and a unique measurement approach to generate time-domain speed readouts. The assessment includes performance characteristics and key features of a syste…
An Intra-Subject Approach Based on the Application of HMM to Predict Concentration in Educational Contexts from Nonintrusive Physiological Signals in…
2021
Previous research has proven the strong influence of emotions on student engagement and motivation. Therefore, emotion recognition is becoming very relevant in educational scenarios, but there is no standard method for predicting students’ affects. However, physiological signals have been widely used in educational contexts. Some physiological signals have shown a high accuracy in detecting emotions because they reflect spontaneous affect-related information, which is fresh and does not require additional control or interpretation. Most proposed works use measuring equipment for which applicability in real-world scenarios is limited because of its high cost and intrusiveness. To tackle this…
IoT-Based Home Monitoring: Supporting Practitioners' Assessment by Behavioral Analysis.
2019
This paper introduces technical solutions devised to support the Deployment Site - Regione Emilia Romagna (DS-RER) of the ACTIVAGE project. The ACTIVAGE project aims at promoting IoT (Internet of Things)-based solutions for Active and Healthy ageing. DS-RER focuses on improving continuity of care for older adults (65+) suffering from aftereffects of a stroke event. A Wireless Sensor Kit based on Wi-Fi connectivity was suitably engineered and realized to monitor behavioral aspects, possibly relevant to health and wellbeing assessment. This includes bed/rests patterns, toilet usage, room presence and many others. Besides hardware design and validation, cloud-based analytics services are intro…
QEC value of the superallowed β emitter 42Sc
2017
The QEC value of the superallowed β+ emitter Sc42 has been measured with the JYFLTRAP Penning-trap mass spectrometer at the University of Jyväskylä to be 6426.350(53) keV. This result is at least a factor of four more precise than all previous measurements, which were also inconsistent with one another. As a byproduct we determine the excitation energy of the 7+ isomeric state in Sc42 to be 616.762(46) keV, which deviates by 8σ from the previous measurement. peerReviewed
The identification of autoionizing states of atomic chromium for the resonance ionization laser ion source of the ISOLDE radioactive ion beam facility
2017
Abstract This paper presents the results of an investigation into autoionizing states of atomic chromium, in the service of the resonance ionization laser ion source (RILIS): the principal ion source of the ISOLDE radioactive ion beam facility based at CERN. The multi-step resonance photo-ionization process enables element selective ionization which, in combination with mass separation, allows isotope specific selectivity in the production of radioactive ion beams at ISOLDE. The element selective nature of the process requires a multi-step “ionization scheme” to be developed for each element. Using the method of in-source resonance ionization spectroscopy, an optimal three-step, three-reson…
Radium ionization scheme development: The first observed autoionizing states and optical pumping effects in the hot cavity environment
2018
© 2018 The Authors This paper reports on resonance ionization scheme development for the production of exotic radium ion beams with the Resonance Ionization Laser Ion Source (RILIS) of the CERN-ISOLDE radioactive ion beam facility. During the study, autoionizing states of atomic radium were observed for the first time. Three ionization schemes were identified, originating from the 7s2 1S0 atomic ground state. The optimal of the identified ionization schemes involves five atomic transitions, four of which are induced by three resonantly tuned lasers. This is the first hot cavity RILIS ionization scheme to employ optical pumping effects. The details of the spectroscopic studies are described …
Carbon nanotubes embedded in a polyimide foil for proton acceleration with a sub-ns laser
2021
A series of thin films made of aligned carbon nanotubes (CNTs) embedded in a polyimide substrate was designed, fabricated and used for the first time to accelerate protons and C ions by interaction with a sub-nanosecond, high power laser beam (600 J energy and 300 ps pulse width) with peak intensity of about 3 × 1016 W/cm2 on target. Each target was 5 μm thick, and the composite material contained CNTs aligned in different directions in the substrate. The results obtained from the analysis of a Thomson Parabola spectrometer, and of the spots imprinted by ions on a series of PM355 nuclear track detectors, indicate high energies (up to 3 MeV for protons and 9 MeV for C ions) and a marked infl…
Collision induced fragmentations of multiply charged sodium bis(2-ethylhexyl)-sulfosuccinate aggregates in gas phase: neutral loss versus charge sepa…
2016
Abstract Stability and fragmentation patterns of multicharged aggregates of sodium bis(2-ethylhexyl)-sulfosuccinate (NaAOT) in gas phase have been investigated by ion mobility mass spectrometry (IM-MS) and tandem mass spectrometry (MS-MS). Positively doubly charged NaAOT aggregates show at low collision energy a preference for the loss of NaAOT molecules, whereas fragmentation through charge separation process is favored at higher collision energy. By increasing the charge state of the aggregates, the fragmentation through charge separation tends to predominate especially at low aggregation number and only charge separation fragmentation is observed for positively quadruply charged species.…