Search results for "Instrumentation"
showing 10 items of 4914 documents
New stage-discharge relationship for cylindrical and semi-cylindrical edged sluice gates
2019
Abstract Gates are simple hydraulic structures which have been widely used for flow control and measurement in irrigation networks. In this paper new sluice gates with cylindrical and semi-cylindrical edges were introduced and the flow movement below these types of gates was experimentally investigated for both free- and submerged-flow conditions. The Buckingham theorem of dimensional analysis and the self-similarity theory were applied for developing the stage-discharge relationships for the two investigated flow conditions. For these cylindrical and semi-cylindrical edged gates and a free-flow condition, the proposed stage-discharge relationship was characterized by an estimate error less…
Lithographic fabrication of soda-lime glass based microfluidics
2013
Abstract Glass is an important material for chemical processing and analysis because of its relatively low cost, mechanical strength, chemical inertness, optical transparency, and electrical insulation and temperature resistance far beyond that of most polymeric materials. We have investigated techniques for direct writing with MeV ions on soda-lime glass as well as capping procedures to form closed buried channels suitable for high-pressure driven flow. Exposure and development of open-channel structures was studied using a combination of programmable proximity aperture lithography and different developers. Unlike our previous work on MeV ion beam lithography of natural silica where an 8% …
Effectiveness of a new method of disinfecting the root canal, using Er, Cr:YSGG laser to kill Enterococcus faecalis in an infected tooth model.
2013
Some lasers have demonstrated to provide effective disinfection when used as adjunctive device to the conventional treatment. The aim of this in vitro study was to determine the effectiveness of the erbium, chromium:yttrium scandium gallium garnet (Er, Cr:YSGG) laser by measuring its bactericidal effect inside the root canal experimentally colonized with Enterococcus faecalis. The laser was tested at different irradiation times (30 and 60 s) and energy of impulses (75 and 25 mJ). A total of 52 single-rooted extracted human teeth were endodontically prepared with rotary instrumentation. All were sterilized and inoculated with a suspension of E. faecalis (105 bacteria/ml). The teeth were rand…
Thermoanalytical studies on sodium 1,2-naphthoqoinone oximesolfonates
1991
Abstract Five sodium 1,2-nitrosonaphtholsulfonatea were prepared or purified and their thermal behaviour studied by TG, DTG and DSC. Pyrolysis MS technique was used to identify evolved gases and FTIR to characterize residuals. The water contents depended on preparation and conservation. The decomposition was analysed in three stages which can be formed by one or more steps. The final product was sodium sulfate in air at 530 °C and the mixture of carbon and sodium sulfide at 950 °C in nitrogen. The structure effects on decomposition is discussed.
Evaluating pulp stiffness from fibre bundles by ultrasound
2012
A non-destructive ultrasonic tester was developed to measure the stiffness of pulp bundles. The mechanical properties of pulp are important when estimating the behaviour of paper under stress. Currently available pulp tests are tedious and alter the fibres structurally and mechanically. The developed tester employs (933 ± 15) kHz tweezer-like ultrasonic transducers and time-of-flight measurement through (9.0 ± 2.5) mm long and (0.8 ± 0.1) mm thick fibre bundles kept at (19.1 ± 0.4) °C and (62 ± 1)% RH. We determined the stiffness of soft wood pulps produced by three kraft pulping modifications: standard kraft pulp, (5.2 ± 0.4) GPa, prehydrolysis kraft pulp, (4.3 ± 0.4) GPa, and alkali extra…
Mean Interplanetary Magnetic Field Measurement Using the ARGO-YBJ Experiment
2011
The sun blocks cosmic ray particles from outside the solar system, forming a detectable shadow in the sky map of cosmic rays detected by the ARGO-YBJ experiment in Tibet. Because the cosmic ray particles are positive charged, the magnetic field between the sun and the earth deflects them from straight trajectories and results in a shift of the shadow from the true location of the sun. Here we show that the shift measures the intensity of the field which is transported by the solar wind from the sun to the earth.
The polarimetric and helioseismic imager on solar orbiter
2020
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science. SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging…
Solar Surface Magnetism and Irradiance on Time Scales from Days to the 11-Year Cycle
2009
The uninterrupted measurement of the total solar irradiance during the last three solar cycles and an increasing amount of solar spectral irradiance measurements as well as solar imaging observations (magnetograms and photometric data) have stimulated the development of models attributing irradiance variations to solar surface magnetism. Here we review the current status of solar irradiance measurements and modelling efforts based on solar photospheric magnetic fields. Thereby we restrict ourselves to the study of solar variations from days to the solar cycle. Phenomenological models of the solar atmosphere in combination with imaging observations of solar electromagnetic radiation and meas…
Immobilised Humic Substances as Low-Cost Sorbents for Emerging Contaminants
2021
Environmental pollution with contaminants of emerging concern (CECs) is a worldwide problem that is receiving increasing attention. Although these substances have been released in the aquatic environment for a long time, wastewater treatment plants are still incapable of removing emerging contaminants completely. Consequently, trace metals, metalloids and pharmaceuticals, as well as surfactant leftovers, are often found in environmental samples. Environmentally friendly and cost-effective sorbents such as humic substances can be used for purification if their sorption properties are increased by immobilization. To our knowledge, immobilized humic substances have not been widely studied as s…
Spatio-Temporal Analysis of Urban Acoustic Environments with Binaural Psycho-Acoustical Considerations for IoT-Based Applications
2018
Sound pleasantness or annoyance perceived in urban soundscapes is a major concern in environmental acoustics. Binaural psychoacoustic parameters are helpful to describe generic acoustic environments, as it is stated within the ISO 12913 framework. In this paper, the application of a Wireless Acoustic Sensor Network (WASN) to evaluate the spatial distribution and the evolution of urban acoustic environments is described. Two experiments are presented using an indoor and an outdoor deployment of a WASN with several nodes using an Internet of Things (IoT) environment to collect audio data and calculate meaningful parameters such as the sound pressure level, binaural loudness and binaural sharp…