Search results for "Iode"
showing 10 items of 1284 documents
Wastewater COD characterization: analysis of respirometric and physical-chemical methods for determining biodegradable organic matter fractions
2010
BACKGROUND: In this work, a comprehensive study of the respirometric and physical–chemical methods has been performed to evaluate the information provided by these two methodologies in order to assess the biodegradable organic matter fractions of wastewater. RESULTS: First, an analysis was performed of the influence of the initial substrate on biomass ratio (F0/X0) in the assessment of readily biodegradable organic matter, SS, through respirometric experiments. In order to achieve an adequate assessment of the SS component, similar conditions (given by the initial F0/X0 ratio) must be employed in experiments that are carried to determine SS and YH (heterotrophic yield). Second, a comparativ…
Polymeric scaffolds based on blends of poly-l-lactic acid (PLLA) with poly-d-l- lactic acid (PLA) prepared via thermally induced phase separation (TI…
2012
Porous scaffolds based on blends of high crystalline Poly-L-lactic acid (PLLA) with low crystalline poly-D-L-lactic acid (PLA) were prepared via Ther- mally Induced Phase Separation (TIPS), with the aim of exploring the possibility to control the degradation behaviour of the PLA-based scaffold, simultaneously pre- serving the morphological characteristics required for tissue engineering applica- tions. Porous foams with different PLLA/PLA weight ratios (from 95/5 to 60/40) were produced and characterised in terms of pore size, porosity, and thermal properties. The scaffolds present an open porosity, with average pore sizes ranging from 30 to 70 lm. Results showed that, when dealing with a P…
Sorption of Hydrocarbons on Peat, and Possibilities for Using Peat-Based Oil Sorbent for Treatment of Polluted Areas
2017
The growing use and transport of crude oil and oil products has led to an increasing amount of spillages of various scales. In the event of an oil spill, it is important to stop the spill from spreading and to clean up the polluted environment. One of the possible ways of treating the polluted areas is the use of oil sorbents. The sorbents used for collecting oil in case of oil spills are mostly synthetic, which limits the possibilities of their disposal. The aim of our study is to investigate the possible use of peat and its modification products for oil and other hydrocarbon sorption. Peat is a prospective material for oil sorption because it has such advantages as low cost, biodegradabil…
1976
A number of acryl and methacryl derivatives of different sulfanilamides (1a—I) were prepared and polymerized. The fixation of the sulfonamide to the polymerizable group was carried out directly, using the acryl- and methacrylamides, and by means of spacer groups, to favour the enzymatic or hydrolytic release of the drug moiety. Selected sulfonamide types of different pKA values were used, and the pH-dependant solubility of the corresponding polymers was studied. The monomeric acryloyl and methacryloyl sulfonamides were homopolymerized radically by AIBN. For distribution studies polysulfadiazineacrylamide, 14C-labelled in the main chain (2e'), was synthesized. Copolymerization with 2-methyls…
A High‐Capacity Negative Electrode for Asymmetric Supercapacitors Based on a PMo 12 Coordination Polymer with Novel Water‐Assisted Proton Channels
2020
The development of a negative electrode for supercapacitors is a critical challenge for the next-generation of energy-storage devices. Herein, two new electrodes formed by the coordination polymers [Ni(itmb)4 (HPMo12 O40 )]·2H2 O (1) and [Zn(itmb)3 (H2 O)(HPMo12 O40 )]·4H2 O (2) (itmb = 1-(imidazo-1-ly)-4-(1,2,4-triazol-1-ylmethyl)benzene), synthesized by a simple hydrothermal method, are described. Compounds 1 and 2 show high capacitances of 477.9 and 890.2 F g-1 , respectively. An asymmetric supercapacitor device assembled using 2 which has novel water-assisted proton channels as negative electrode and active carbon as positive electrode shows ultrahigh energy density and power density of…
Effect of small amounts of poly(lactic acid) on the recycling of poly(ethylene terephthalate) bottles
2011
Abstract Poly(ethylene terephthalate) (PET) is one of the most used commodity polymers, especially for food and beverage applications, and its recycling is of great importance because of the possible use in the textile and construction industries. On the other hand, the interest in biodegradable polymers has led, in recent years, to the use of materials such as poly(lactic acid) (PLA) also in the food and beverage industry. The presence of small amounts of PLA in the PET waste can significantly affect the post-consumer recycling process. In this work, the effect of the presence of small amounts of PLA on the recycling of PET bottles is investigated by rheological, mechanical, morphological …
Evaluation of a pilot-scale biotrickling filter as a VOC control technology for the plastic coating sector
2011
Abstract The performance and feasibility of a biotrickling filter (BTF) pilot unit for the treatment of exhaust gases from two robotic spray paint booths at a plastic coating facility were investigated. The volatile organic compound (VOC) concentrations in the emissions of the exhaust gases from the paint booths were relatively stable, although the VOC composition depended on the applied solvent-paint formulation in the booths. The pilot plant was operated for one year at empty bed residence times (EBRTs) ranging from 30 to 93 s. The performance of the system was affected by the solvent-paint formulations. An EBRT between 30 and 40 s was enough to meet legal requirements for products contai…
Natural compounds as light stabilizer for a starch-based biodegradable polymer
2014
Abstract The photooxidation behavior of a commercial starch-based biodegradable polymer, i.e., new generation Mater-Bi, loaded with natural stabilizers was investigated in consideration for outdoor agricultural applications. The photooxidation behavior of the biodegradable films was monitored mainly by mechanical tests and spectroscopic analysis. In order to formulate biodegradable films without any synthetic compounds, suitable for outdoor applications and with good photooxidation stability, antioxidants such as α-tocopherol and quercetin (Q) were considered. The results obtained using natural compounds were compared with those obtained by using a synthetic antioxidant and a light stabiliz…
Synthesis and Electronic Spectra of Substitutedp-Distyrylbenzenes for the Use in Light-Emitting Diodes
2000
The influence of substitution on the absorption and Luminescence spectra of oligo(phenylenevinylene)s has been studied using distyrylbenzene (DSB) as a model compound. The degree, character, and pattern of substitution was varied systematically, altering the electronic properties of the DSB, the wavelength of the emitted light could be tuned over a range of 100 nm. The syntheses of 6b—h were performed by twofold Wittig Horner-olefinations of bisphoshonates 1a, b with substituted benzaldehydes 2a—i, 6ivia Heck-reaction of the dibromosulfonylbenzene 3, 6k by Siegrist-reaction of 4 with N-phenylbenzaldimine and the Knoevenagel-reaction of benzyl cyanide with 5 led to 6l.
Pyrene-fused bisphenazinothiadiazoles with red to NIR electroluminescence
2017
The synthesis and characterisation of two pyrene-fused phenazinothiadiazole derivatives with different substituents is described. Light-emitting diodes incorporating such derivatives display red to near-infrared electroluminescence with emission peaks at wavelengths as long as 721 nm, illustrating that pyrene-fused bisphenazinothiadiazoles can serve as deep red and NIR emitters.