Search results for "Ion source"
showing 10 items of 337 documents
Radioactive ion beam manipulation at the IGISOL-4 facility
2020
The IGISOL-4 facility in the JYFL Accelerator Laboratory of the University of Jyvaskyla (JYFL-ACCLAB) produces low-energy radioactive ion beams, primarily for nuclear spectroscopy, utilizing an ion guide-based, ISOL-type mass separator. Recently, new ion manipulation techniques have been introduced at the IGISOL-4 including the application of the PI-ICR (Phase-Imaging Ion Cyclotron Resonance) technique at the JYFLTRAP Penning trap, as well as commissioning of a Multi-Reflection Time-Of-Flight (MR-TOF) separator/spectrometer. The successful operation of the MR-TOF also required significant improvement of the Radio-Frequency Quadrupole (RFQ) cooler and buncher device beam pulse time structure…
High Voltage Metrology with Collinear Laser Spectroscopy
2018
We present results of laser spectroscopic high voltage measurements on the 5 ppm relative uncertainty level using a pump and probe scheme on Ca+ ions. With the two-stage laser interaction and with a reference measurement we can eliminate systematic effects like differences in contact potentials of electrode materials, thermo-electric voltages, and the unknown starting potential of the ions in the ion source. Our measurements are compatible with the 5 ppm precision limits of the high voltage dividers used for comparison and demonstrate an unprecedented increase in the accuracy of laser-based high voltage measurements by a factor of 20.
First successful ionization of Lr (Z = 103) by a surface-ionization technique.
2013
We have developed a surface ionization ion-source as part of the JAEA-ISOL (Isotope Separator On-Line) setup, which is coupled to a He/CdI2 gas-jet transport system to determine the first ionization potential of the heaviest actinide lawrencium (Lr, Z = 103). The new ion-source is an improved version of the previous source that provided good ionization efficiencies for lanthanides. An additional filament was newly installed to give better control over its operation. We report, here, on the development of the new gas-jet coupled surface ion-source and on the first successful ionization and mass separation of 27-s (256)Lr produced in the (249)Cf + (11)B reaction.
Release Studies of Atomic Technetium
1991
Application of a laser ion source (LIS) is a promising new technique for trace analysis with high efficiency and selectivity. One of the problems which can limit its efficiency attained in practice is the adsorption of sample atoms on the hot walls of the LIS cavity. We have studied the release of atomic technetium from different wall materials at temperatures up to 2500 K. For these investigations resonance ionization of technetium atoms applying a copper vapour pumped dye laser system and γ-spectrometry of 6-h 99mTc have been used. Theoretical calculations of the heat of desorption for technetium on different wall materials are presented and compared with experimental data. Though the res…
Resonance laser ionization spectroscopy of tellurium
2019
Abstract Resonance ionization schemes for tellurium are investigated with a resonance ionization laser ion source and Ti:Sapphire lasers for fundamental research applications. We present the first three-step resonance ionization spectra of atomic Te. Several autoionizing Rydberg series converging to the first excited state of Te+ are observed and assigned to 5p3 (2Do3/2) ns and nd configurations. Our results include confirmation and significant expansion of the Rydberg series previously reported as well as observation of three new series. From the series convergence limits the ionization potential of tellurium is revised to be 72,669.006(42)stat(20)sys cm−1.
Photo-assisted O− and Al− production with a cesium sputter ion source
2021
It has been recently proposed that the production of negative ions with cesium sputter ion sources could be enhanced by laser-assisted resonant ion pair production. We have tested this hypothesis by measuring the effect of pulsed diode lasers at various wavelengths on the O− and Al− beam current produced from Al2O3 cathode of a cesium sputter ion source. The experimental results provide evidence for the existence of a wavelength-dependent photo-assisted enhancement of negative ion currents but cast doubt on its alleged resonant nature as the effect is observed for both O− and Al− ions at laser energies above a certain threshold. The beam current transients observed during the laser pulses s…
Spectroscopic method to study low charge state ion and cold electron population in ECRIS plasma
2018
The results of optical emission spectroscopy experiments probing the cold electron population of a 14 GHz Electron Cyclotron Resonance Ion Source (ECRIS) are reported. The study has been conducted with a high resolution spectrometer and data acquisition setup developed specifically for the diagnostics of weak emission line characteristic to ECRIS plasmas. The optical emission lines of low charge state ions and neutral atoms of neon have been measured and analyzed with the line-ratio method. The aforementioned electron population temperature of the cold electron population (Te < 100 eV) is determined for Maxwell-Boltzmann and Druyvesteyn energy distributions to demonstrate the applicability …
The effect of gas mixing and biased disc voltage on the preglow transient of electron cyclotron resonance ion source
2012
The effect of gas mixing and biased disc voltage on the preglow of electron cyclotron resonance ion source plasma has been studied with the AECR-U type 14 GHz ion source. It was found that gas mixing has a significant effect on the preglow. The extracted transient beam currents and efficiency of the heavier species increase, while the currents and efficiency of the lighter species decrease when gas mixing is applied. The effect of the biased disc was found to be pronounced in continuous operation mode in comparison to preglow. The data provide information on the time scales of the plasma processes explaining the effects of gas mixing and biased disc. The results also have implications on pr…
An inductively heated hot cavity catcher laser ion source.
2015
An inductively heated hot cavity catcher has been constructed for the production of low-energy ion beams of exotic, neutron-deficient Ag isotopes. A proof-of-principle experiment has been realized by implanting primary (107)Ag(21+) ions from a heavy-ion cyclotron into a graphite catcher. A variable-thickness nickel foil was used to degrade the energy of the primary beam in order to mimic the implantation depth expected from the heavy-ion fusion-evaporation recoils of N = Z (94)Ag. Following implantation, the silver atoms diffused out of the graphite and effused into the catcher cavity and transfer tube, where they were resonantly laser ionized using a three-step excitation and ionization sc…
Integrated Modeling of the Beam Formation and Extraction in the Linac4 Hydrogen Negative Ion Source
2018
In order to make the predictive simulation tools for the extracted beam current and emittance in the Linac4 H− ion source, we have launched the development of the integrated model for the H− ion beam formation and extraction process. More specifically, our 3D KEIO-Beam Formation and eXtraction (3D KEIO-BFX) is coupled with the NINJA, IBSIMU and TRAVEL. The extracted H− ion beam current and co-extracted electron current obtained by the integrated model have shown reasonable agreement with the experiments. peerReviewed