Search results for "LYST"
showing 10 items of 904 documents
Nature of cobalt active species in hydrodesulfurization catalysis: combined support and preparation method effects
2007
Abstract Co/γ-Al2O3, Co/SiO2, Co/MCM-41, Co/ASA and Co/S2 (amorphous aluminosilicate with Al/Si = 0.13 and with Al/Si ≈ 2, respectively) were prepared by the method of wet impregnation and by the method of precipitation in the presence of sodium carbonate. The samples were characterised by XPS, XRD and TPR. The catalytic activity was tested in the hydrodesulfurization of thiophene using a continuous flow reactor. Among the wet impregnated catalysts those supported on the amorphous and ordered mesoporous silica exhibited higher HDS activity as compared to the alumina containing supports. Particularly, the use of the mesoporous, high surface area MCM-41 support, determined the best performing…
Atomistic Insights into Nitrogen-Cycle Electrochemistry: A Combined DFT and Kinetic Monte Carlo Analysis of NO Electrochemical Reduction on Pt(100)
2017
Electrocatalytic denitrification is a promising technology for the removal of NOx species in groundwater. However, a lack of understanding of the molecular pathways that control the overpotential and product distribution have limited the development of practical electrocatalysts, and additional atomic-level insights are needed to advance this field. Adsorbed NO has been identified as a key intermediate in the NOx electroreduction network, and the elementary steps by which it decomposes to NH4+, N2, NH3OH+, or N2O remain a subject of debate. Herein, we report a combined density functional theory (DFT) and kinetic Monte Carlo (kMC) study of this reaction on Pt(100), a catalytic surface that i…
Nanolayered Cobalt-Molybdenum Sulfides as Highly Chemo- and Regioselective Catalysts for the Hydrogenation of Quinoline Derivatives
2018
[EN] Herein, a general protocol for the preparation of a broad range of valuable N-heterocyclic products by hydrogenation of quinolines and related N-heteroarenes is described. Interestingly, the catalytic hydrogenation of the N-heteroarene ring is chemoselectively performed when other facile reducible functional groups, including alkenes, ketones, cyanides, carboxylic acids, esters, and amides, are present. The key to successful catalysis relies on the use of a nanolayered cobalt-molybdenum sulfide catalyst hydrothermally synthesized from earth-abundant metal precursors. This heterogeneous system displays a tunable composition of phases that allows for catalyst regeneration. Its catalytic …
Titanium (IV) chloride complexes with salen ligands supported on magnesium carrier: Synthesis and use in ethylene polymerization
2009
The magnesium support with the formula MgCl 2 (THF) 0.32 (Et 2 AlCl) 0.36 was used for immobilization of salen complexes of titanium [Ti(salen)Cl 2 , Ti(salen(O-Me) 2 )Cl 2 ]. The effects of the catalyst composition (i.e. type of titanium complex and type of activator), polymerization temperature, polymerization time, and the effect of comonomer (1-octene) on the activity of the obtained supported catalysts, on the polymer characteristics (molecular weight, molecular weight distribution, melting point), and on the polymer morphology were studied. The findings were compared to those obtained for corresponding unsupported systems. Catalysts immobilization results in considerable changes in ca…
Bifunctional Acid-Base Catalysis
2011
Acid-base catalysis with bifunctional catalysts is a very prominent catalytic strategy in both small-molecule organocatalysts as well as enzyme catalysis. In both worlds, small-molecule catalysts and enzymatic catalysis, a variety of different general acids or hydrogen bond donors are used. In this chapter, important parallels between small molecule catalysts and enzymes are discussed, and a comparison is also made to the emerging field of frustrated Lewis pair catalysis.
Direct arylation of heteroaromatic compounds with congested, functionalised aryl bromides at low palladium/triphosphane catalyst loading.
2011
International audience; A new ferrocenyl triphosphane ligand associated to palladium was found to be an efficient catalyst for the direct coupling of highly congested, functionalised aryl bromides with a variety of heteroarenes. These coupling reactions can generally be performed by using a low-loading (0.1-0.5 mol%) of the catalyst. The present protocol tolerates important and useful functional groups, which allows for further elaboration into more sophisticated heterocyclic molecules. The straightforward arylation of heteroaromatic compounds with congested ortho-substituted aryl bromides may permit further convergent syntheses of diverse ligands, biologically active molecules and molecula…
Lignin-based activated carbon-supported metal oxide catalysts in lactic acid production from glucose
2021
In this study, heterogeneous biomass-based activated carbon-supported metal oxide catalysts were prepared and tested for lactic acid production from glucose in aqueous solution. Activated carbons were produced from hydrolysis lignin by chemical (ZnCl2) or steam activation and modified with a nitric acid treatment and Sn, Al, and Cr chlorides to obtain carbon-based metal oxide catalysts. The modification of the carbon support by nitric acid treatment together with Sn and Al oxides led to an increase in lactic acid yield. The highest lactic acid yield (42%) was obtained after 20 minutes at 180 °C with the Sn/Al (5/2.5 wt.%) catalyst on steam-activated carbon treated by nitric acid. Reusabilit…
Total oxidation of naphthalene using bulk manganese oxide catalysts
2013
Several Mn2O3 catalysts have been synthesized using different preparation methods and tested for the total oxidation of naphthalene, a model polycyclic aromatic compound. The catalysts have been characterized by several physico-chemical techniques such as XRD, TPR, XPS, EDX and TEM. The surface area of the catalyst seems to be of paramount importance, since the mass normalized activity of catalysts increases as the surface area of the Mn2O3 catalysts increases. Consequently, a high surface area ordered mesoporous Mn2O3 catalyst, obtained through a nanocasting route using mesoporous KIT-6 silica as a hard template, was the most efficient catalyst for the deep oxidation of naphthalene. In add…
Gas-Phase Hydrogenation of Propionitrile Catalyzed by LnCu2 (Ln = La, Ce, Pr, Nd)
2007
The hydrogenation of propionitrile over binary copper−lanthanide intermetallic compounds (LnCu2, Ln = La, Ce, Pr, Nd) was studied in the gas phase. The results show that the reaction main product is the primary amine, the n-propylamine. To our knowledge, it is the first time that such behavior is reported for copper catalysts.