Search results for "Laminate"
showing 9 items of 129 documents
Mode I interlaminar fracture toughness of thin-ply laminates with CNT webs at the crack interface
2019
Abstract Pristine and functionalized carbon nanotube (CNT) webs were introduced at the interlaminar region of two different thin-ply carbon fibre reinforced polymer systems (NTPT 402 prepreg, and TeXtreme/SE84LV). The Mode I interlaminar fracture toughness (ILFT) for the NTPT 402 material was substantially lower. In contrast when SE84LV resin was used, the resistance curves were virtually unchanged and with no depreciation in the steady state value of the ILFT. This demonstrates that a careful choice of the resin is essential to permit the embedding of CNT webs in thin-ply laminates without compromising structural performance and opens a new way towards the development of multifunctional th…
Hygrothermal conditions in Cross Laminated Timber (CLT) dwellings
2020
The use of CLT has been increasing the last decade, and a subsequently focus on documentation of the accompanying indoor climate and exposed wooden surfaces on human well-being. This study presents the results of a measurement campaign conducted over one year of a CLT apartment building in Grimstad, Norway. The apartment building consists of three floors with 35 apartments and comply with the Norwegian passive house standard and energy grade A. Measurements of the relative humidity (RH), indoor air temperature and wood moisture content (MC) were performed in the exposed CLT spruce panels in three apartments in two different floors. The results from the three apartments show a relatively sma…
Formation of microbial organic carbonates during the Late Jurassic from the Northern Tethys (Amu Darya Basin, Uzbekistan): implications for Jurassic …
2020
23 pages; International audience; The Late Jurassic was a period of major global carbon cycle perturbations with episodes of anoxia leading to regional accumulation of organic matter in sediments worldwide. The Tubiegatan section (SW Gissar Mountains, Uzbekistan) located in the Northern Tethys, shows atypical organic-rich limestone and marl deposits (up to 6% of total organic carbon) marked by pronounced negative excursions of δ13Ccarb (amplitude of ca. 12‰) and δ13Corg (amplitude of ca. 4‰) recorded during the Middle Oxfordian (Transversarium Zone). A transdisciplinary approach including sedimentology, palynofacies characterization, mineralogy, organic and inorganic geochemistry was carrie…
Optical and structural properties of Al 2 O 3 /ZnO nanolaminates deposited by ALD method
2014
International audience; We report on the investigation of optical and structural properties of Al2O3/ZnO nanolaminates. The nanolaminates were deposited on Si and glass substrates by Atomic layer deposition method. Structural properties of nanolaminates were studied by SEM, GIXRD, and AFM. Optical characterization was performed by transmittance and photoluminescence spectroscopy. Complex analysis of monolayer properties was done by ellipsometry. Optical constants for Al2O3 and ZnO monolayer were calculated.
BEM analysis of a piezoelectric structural health monitoring system for delamination detection
2013
In the present work a piezoelectric based structural health monitoring (SHM) system is analyzed with the aim of assessing the ability of the piezoelectric patch to detect both edge and embedded delaminations proper of flange-skin composite laminated structures. he boundary element model is developed for piezoelectric solids and is implemented by taking advantage of the multidomain technique to model laminated and cracked configurations. A non-linear spring model interface is then implemented in conjunction with an iterative procedure allowing for the simulation of the finite stiffness of the bonding layers as well as of the non-penetration condition of the delamination surfaces. he dynamic …
Variable kinematics models for multilòayered smart plates
2015
Families of layer-wise and equivalent single layer advanced finite elements for the geometrically nonlinear analysis of smart multilayered plates are formulated in a unified framework. The proposed modeling strategy reduces the multifield problems to an effective mechanical plate by the condensation of the electromechanical state into the plate kinematics, which is assumed as a variable order expansion along the plate thickness. Numerical results are presented to validate the proposed modeling approach and finite elements and to investigate their features.
Experimental Investigation on Stiffness and Strength of Single-Lap Z-Pinned Joints in a Laminated CFRP Stress-Ribbon Strip
2016
Carbon fiber-reinforced polymer (carbon-polymer) is an advanced lightweight composite material with high strength and excellent resistance to corrosion and fatigue. Over the past decades, application of fiber-reinforced polymers has been spread from the aerospace to other branches of industry such as automobile and civil engineering. Unidirectional carbon-polymers have a high potential for replacing steel in tensile members. Recently, the first carbonpolymer stress-ribbon bridge has been constructed in Germany. The non-laminated strip-loop carbon-polymer thin strips were used as the load bearing components in this bridge. In comparison with the laminated components, the applied cables are c…
A Quantitative Analysis of the Thermoelastic Effect in CFRP Composite Materials
2010
In this study the thermoelastic signal from carbon fibre-reinforced plastic (CFRP) laminates is investigated. A comparison between the theoretical and experimental values of the thermoelastic signal is reported, with the theoretical predictions obtained from two different quantitative models. These models are based on the classic thermoelastic effect law extended to the case of orthotropic materials (by using the mesomechanical or bulk approach), and the modified law assuming that the surface resin-rich layer behaves as a strain witness of the laminate. It is found that the theoretical predictions of the two models can be strongly and differently influenced by the intrinsic orthotropy of ca…
Progressive non-linear damage of variable angle tow composite plates by a Ritz approach
2022
In this work a Ritz model for progressive non-linear damage analysis of variable angle tow composite plates is presented. The damage is treated in the framework of continuum damage mechanics and its evolution is based on a linear softening law with which four damage indices are computed for degrading the mechanical properties of the material. A set of analyses have been carried out to investigate how damage evolves in VAT composite plates under progressive loading.