Search results for "Low-density polyethylene"

The antioxidant effect in controlling thermal degradation of a low density polyethylene blown film

2004

Abstract It is well known that antioxidants are widely used to prevent thermal degradation of high density and linear low density polyethylene. Antioxidants are not always present in low density polyethylene and only small amounts are usually added to these resins. In this work the effect of an antioxidant system on a low density resin having MFI (190 °C/2.16 kg)=2 g/10′ and density 0.9230 g/cm3 has been studied. Its effect on melt viscosity has been studied by means of a batch mixer and the torque vs time behaviour has been analysed. The results show that a maximum in the torque vs time curve can be seen for the material containing antioxidant. In contrast, the material without antioxidant…

Rheological Behaviour, Mechanical Properties and Processability of Biodegradable Polymer Systems for Film Blowing

2017

Films for agricultural or packaging applications are typically made of low density polyethylene (LDPE). They are produced through the film blowing process, which requires the use of polymers with suitable rheological properties. Furthermore, the short shelf-life which is often related to many packed products leads to huge amounts of plastic-based wastes. This suggests the use of biodegradable and/or compostable polymers in replacement for traditional ones. To this regard, only few data exist on the rheological properties of biodegradable polymers undergoing film blowing processing. In this work, a detailed investigation on the rheological, mechanical and processability behaviour of some bio…

Effect of compatibilization on the photo-oxidation behaviour of polyethylene/polyamide 6 blends and their nanocomposites

2015

Abstract Polymer based nanocomposites are increasingly attracting interest from academia and industry, and the use of polymer blends as matrices greatly increase their potential field of application. In order to improve their characteristics, the use of compatibilizers acting on the blend components is mandatory. However, this also leads to rising concerns regarding the behaviour of polymer blend based nanocomposites upon being subjected to photo-oxidative degradation. It is known that morphology can deeply influence the photo-oxidative behaviour, and this can be therefore deeply influenced by the blend components and by the use of compatibilizers. In this work, polymer blend nanocomposites…

Shear influences on the solubility of LDPE in ethene

1998

Abstract The influence of shear on the demixing pressures of the binary system ethene/polyethene was determined viscometrically in the temperature range 147–195°C up to pressures of 1400 bar at polymer concentrations of 18.4, 22.5 and 27.4 wt%, respectively. Autoclaves were used to prepare the solutions and to measure cloud points for the stagnant system. A high-pressure viscometer was used to perform experiments at shear rates γ up to 1500 s −1 . Under all conditions investigated here the two-phase area grows as γ becomes larger and the demixing pressures increase up to 23 bar. This observation is in contrast to theoretical expectation according to which it should be the one-phase region w…

Ion bombardment of polyethylene—influence of polymer structure

2007

Abstract Polyethylenes of various macromolecular and supermolecular structures were studied from the point of view of their susceptibility to an ion beam treatment. An influence of molecular weight (Mw), molecular weight distribution (Mw/Mn) and the degree of branching were compared within the set of low-density polyethylenes (LDPE) studied. An influence of the length of branches was compared between LDPE, linear low-density (LLDPE) and high-density (HDPE) polyethylenes. An influence of the degree of crystallinity and the morphology of a crystalline phase were compared for HDPE samples solidified under various thermal conditions and ultra-high molecular weight polyethylene (UHMWPE). Plate p…

Characterization and Reprocessing of Greenhouse Films.

2001

Films for greenhouses are an attractive source of post-consumer plastic materials because they are mainly made of polyethylene and can be easily collected in large amounts in small zones. The types of polymers for this application are, however, increasing and the films contain not only additives and stabilisers, but also fertiliser and pesticide residues. Finally, the extent of photooxidative degradation undergone during the use can strongly influence the recycling operations and the final properties of the secondary material. In this work, a complete characterisation of post-consumer films for greenhouses has been carried out and the properties of the recycled material have been correlated…

Effect of stress and temperature on the thermomechanical degradation of a PE-LD/OMMT nanocomposites

2014

Thermomechanical degradation of nanocomposites is a topical issue that has not been fully investigated as demonstrated by the low number of papers available in the literature regarding this spe- cific aspect. In particular, with regards to low density polyethylene/clay nanocomposites, the degrada- tion behavior is very complex since it involves the degradation paths of both the polymer matrix and the organomodified nanoclay. In the present work, the effects of mechanical stress and temperature on the thermomechanical behavior of PE-LD/organomodified clay nanocomposites and the degradation paths were investigated by rheological, FT-IR and mechanical methods. The results have shown that the t…

Recycling and Thermomechanical Degradation of LDPE/Modified Clay Nanocomposites

2013

The special features of polymer nanocomposites are continually gaining interest both in academia and in industry. The latter is especially experiencing an increase in interest towards this class of polymer composites, and this is leading to the first concerns about their reprocessing and reciclability. Here, a systematic study on the behavior of LDPE/Cloisite 15A systems upon reprocessing in a single-screw extruder is described, focusing on rheological, mechanical, and morphological properties changes. The investigated systems show a very complex thermomechanical degradation behavior, with the degradation of the clay modifier and different degradation paths involving the polymer matrix; all…

1982

The stress relaxation behaviour after compression yielding of two semicrystalline polymers, a low density polyethylene and an isotactic polypropylene, is investigated. Data taken at several strains, reached with different sample loading rates, are considered. Master curves are obtained by means of dimensionless stress and time measures, similar to those recently adopted for some amorphous polymers. Die Spannungsrelaxation nach Druckbeanspruchung wurde an zwei semikristallinen Polymeren, Polyethylen neidriger Dichte und isotaktischem Polypropylen, untersucht. Die bei unterschiedlichen Deformationen, welche mit unterschiedlichen Beanspruchungsgeschwindigkeiten erreicht wurdern, erhaltenen Erg…

Effect of irradiation temperature and dose rate on the mechanical tensile behaviour of low density polyethylene

1993

Abstract The effect of ageing due to gamma radiation, at various dose rates and temperatures, on the mechanical tensile behaviour of low density polyethylene is studied. In order to detect synergistic effects, tensile tests on samples subjected to thermal treatment corresponding to the same temperature for the same time as for the irradiation tests have also been performed. The results indicate a generalized decrease of the elongation at break, with brittleness of the material for the most severe ageing treatments. For modulus values, an increase is observed for particular experimental conditions. These results are related to morphological and structural modifications induced in the polymer…