Search results for "MEC"

Flow measurement using circular portable flume

2018

Abstract The circular portable flume is a simple device to measure discharge in circular drainage networks. Since the unit can be easily installed and removed, it is helpful in water distribution measurement and management. First in this paper the available studies are reviewed for highlighting the effect of both the contraction ratio and the flume slope on the stage-discharge relationship. Then the Buckingham's Theorem of the dimensional analysis and the self-similarity theory are used to deduce the stage-discharge curve of the circular flume. The new theoretical stage-discharge equation is calibrated by the literature available experimental data and those obtained in this experimental inv…

Testing soil water repellency in a Sicilian area two years after a fire

2019

The water drop penetration time (WDPT) technique was applied in 2018 to check persistence of soil water repellency (SWR) in a Sicilian mountain area affected by a wildfire on June 2016. A total of four sites, that were severely water repellent immediately after burning, were sampled. Depending on the site, wettable soil conditions, less SWR and maintenance of a noticeable SWR were detected two years later. At the site showing a near-constant SWR, WDPTs were particularly high in the top soil layer (0-0.03 m) and they appreciably decreased more in depth. Signs of decreasing SWR in drier soil conditions and in association with coarser soil particles were also detected at this site. High gradie…

Closure to “Extraction of the Flow Rate Equation under Free and Submerged Flow Conditions in Pivot Weirs with Different Side Contractions” by N. Shei…

2018

Analytical approach extending the Granier method to radial sap flow patterns

2020

Abstract The Granier thermal dissipation (TD) method is probably the most applied method to compute the transpiration flux of trees, due to its simplicity and effective compromise between theory and data availability. Starting from the heat transfer equations at the basis of Granier’s method, the objective of this paper is to derive an analytical solution for the transpiration flux to extend the sap flow equations to the radial domain. We adopted a flexible approach to cope with the differences in radial sapflow density (SFD) profile shapes that are known to occur in relation to wood anatomy (diffuse porous vs. ring- or non-porous xylem). With this purpose, we investigated the robustness of…

Adaptive-Gain Observers and Applications

2007

We distinguish two kinds of observers for nonlinear systems which are used by scientists and engineers: empirical observers and converging observers.

Adaptive backstepping control of uncertain systems in the presence of unmodeled dynamics and time-varying delays

2016

In this paper, the problem of adaptive backstepping control for uncertain systems in the presence of unmodeled dynamics and input time-varying delays is studied. Under some mild assumptions, a robust adaptive controller is designed such that the system is globally stabilized by using adaptive backstepping technique. Meanwhile, the transient system performance in L2 and norms of system output can be adjusted by choosing the design parameters. Finally, a simulation example is given to show the effectiveness of the results.

Consistent Clustering of Elements in Large Pairwise Comparison Matrices

2018

[EN] In multi-attribute decision making the number of decision elements under consideration may be huge, especially for complex, real-world problems. Typically these elements are clustered and then the clusters organized hierarchically to reduce the number of elements to be simultaneously handled. These decomposition methodologies are intended to bring the problem within the cognitive ability of decision makers. However, such methodologies have disadvantages, and it may happen that such a priori clustering is not clear, and/or the problem has previously been addressed without any grouping action. This is the situation for the case study we address, in which a panel of experts gives opinions…

Decoupled nonlinear adaptive control of position and stiffness for pneumatic soft robots

2020

This article addresses the problem of simultaneous and robust closed-loop control of joint stiffness and position, for a class of antagonistically actuated pneumatic soft robots with rigid links and compliant joints. By introducing a first-order dynamic equation for the stiffness variable and using the additional control degree of freedom, embedded in the null space of the pneumatic actuator matrix, an innovative control approach is introduced comprising an adaptive compensator and a dynamic decoupler. The proposed solution builds upon existing adaptive control theory and provides a technique for closing the loop on joint stiffness in pneumatic variable stiffness actuators. Under a very mi…

Mechanical and metallurgical characterization of AA6082-T6 sheet-bulk joints produced through a linear friction welding based approach

2020

In the last decades, new flexible manufacturing processes have been developed to face the demands, by many industrial fields, for highly customized complex functional parts. The peculiar design of these components often overcomes conventional sheet metal and bulk metal forming processes capabilities. In order to face this issue, new hybrid techniques, capable of exploit key advantages of different processes, have to be developed. In this study, a method to obtain sheet-bulk joints, based on the Linear Friction Welding process, is proposed. The feasibility of the technique was investigated through an experimental campaign carried out with varying pressure and oscillation frequency using AA60…

Analysis of hybrid vehicle transmissions with any number of modes and planetary gearing: kinematics, power flows, mechanical power losses

2021

Abstract This paper is focused on upgrading a unified parametric model, available in the literature, that can perform both the analysis and the design of Power-Split Continuously Variable Transmissions (PS-CVTs), which are particularly promising to deploy in the hybrid electric powertrain. In particular, this work is focused on the analysis of PS-CVTs and proposes a new matrix approach for identifying the basic functional parameters underlying the model from the constructive layout of the transmission. This new method does not rely on a case-specific formulation, thus befits any power-split transmission, regardless of the number of planetary and ordinary gear sets and their constructive arr…