Search results for "MINERALOGY"
showing 10 items of 1516 documents
A dilatometric study of the Lao.8Sr0.2MnO3 sintering behaviour
1997
Abstract The sintering behaviour of La0.8Sr0.2MnO3 has been studied by dilatometry between 1100 and 1800 K in various oxygen potentials [pure oxygen, air and nitrogen (PO2 = 1 × 10−5 bar)]. The starting material was prepared by spray pyrolysis of aqueous solutions of nitrates. Two classical sinter stages, neck formation and grain growth respectively, were evidenced from dilatometric curves and this result was corroborated by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The rate of densification was found to be directly dependent on oxygen partial pressure, the best conditions being in nitrogen. These results are discussed in terms of vacancy diffusion and oxygen …
Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers
2010
CoFe2O4/multiwall carbon nanotubes (MWCNTs) composite nanofibers were produced by electrospinning a dispersion of MWCNTs in a solution of polyvinylpyrrolidone, iron(III) nitrate nonahydrate, cobalt (II) acetate tetrahydrate, absolute ethanol and H2O. Microstructure was examined by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). Thermal behaviour was studied by thermogravimetry and differential thermal analysis (TG-DTA) and phase analysis of calcined fibers was performed by X-ray diffraction (XRD). Upon thermal treatment at 450 °C defect-free, randomly oriented composite fibers having a mean diameter of 60 ± 10 nm were obtained. The results s…
Data on phase and chemical compositions of black sands from “El Ostional” beach situated in Mompiche, Ecuador
2020
Abstract Data revealing the phase and chemical compositions of natural black sands from “El Ostional” beach, located in the northern Ecuadorian Pacific coast have been presented. The samples were collected from six points over the shore area of approximately 500 × 40 m2. The data on crystalline phases (iron titanium oxide, orthoclase feldspar and zircon) were determined by X-ray powder diffraction (XRPD), while semi-quantitative chemical analyses of major (Fe and Ti) and trace elements were obtained by X-ray fluorescence spectroscopy (XRF). The phase composition was verified by scanning electron microscopy (SEM), using backscattered electron (BSE) mode and energy dispersive spectroscopy (ED…
Vacuum arc deposition of protective layers on glass and polymer substrates
2001
Abstract Vacuum arc deposition allows one to deposit various coatings on insulating and temperature-sensitive substrates (like polymers). An advantage of the vacuum arc deposition technique is the low substrate temperature during the deposition process. A vacuum arc deposition apparatus for the coating of large-area substrates has been developed. Ti, TiN, TiO 2 and diamond-like single and multilayer coatings have been deposited on plastic and glass substrates. The vacuum arc technology permits formation of multilayer colour filters of high uniformity on substrates with dimensions up to 2000×1400 mm 2 . The microstructure, chemical composition and optical properties of the deposited coatings…
Studies and Researches on the Obtaining of Sintered Gradual Porous Structures by Irregular Nickel Powders Sedimentation
2012
The aim of this work is to obtain sintered porous membranes with graded structure for microfiltration by sedimentation and sintering of metallic powders. Our previous studies have demonstrated the possibility of obtaining sintered porous materials with graded structure by sedimentation. In this paper, irregular nickel particles were used having a grain size in the 2-90 µm range evaluated using scanning electron microscopy and laser scattering particle size analyzer. The powders were sedimented into a sintering die in a sedimentation medium consisting of water and dispersant agent. After drying, the samples were sintered at 1000°C for 10 minutes in vacuum (~1•10-3 Pa). The structures obtaine…
Rare earth doped glass–ceramics containing NaLaF4 nanocrystals
2016
Abstract Oxyfluoride glasses 16Na 2 O–9NaF–5LaF 3 –7Al 2 O 3 –63SiO 2 (mol%) activated with 3% terbium, dysprosium, praseodymium and neodymium fluorides have been prepared and studied by differential thermal analysis, cathodoluminescence, X-ray induced luminescence, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. We found out that the presence of crystalline phase enhances the X-ray induced luminescence intensity. X-ray induced luminescence is the most intense for the sample activated with terbium and treated at 700 °C, whereas the praseodymium and neodymium activated samples have the fastest decay times.
Analysis of surface characteristics of protaper universal and protaper next instruments by scanning electron microscopy
2017
Background Many new rotary files systems have been introduced, however, limited research has been conducted related to the surface irregularities of these files and if these have any effects on the files themselves. Hence, the aim of the present study was to analyze surface irregularities of the ProTaper® Universal rotary files (PTU) and the ProTaper Next™ rotary files (PTN) before and after instrumentation in curved canals. The main objective was to investigate the nature of these irregularities and how they might influence the use and fracture of rotary files during root-canal treatments. Material and methods The files were examined pre-operatively using a stereomicroscope and scanning el…
Composition-related structural, thermal and mechanical properties of Ba1−xSrxTiO3ceramics (0 ≤x≤ 0.4)
2015
The Ba1−xSrxTiO3 (BST) ceramics were prepared by conventional ceramic method. The crystalline structure and morphology were studied by X-ray diffraction and scanning electron microscopy, respectively. Experimental results show that increase of sintering temperature leads to an uncontrolled precipitating of the phase with a lower content of Ti. The dielectric constant and specific heat as a function of composition and temperature were investigated. The increasing concentration of Sr ions leads to a shift of the Curie point below room temperature. To determine the elastic constants (the Young's modulus E, the shear modulus G and the Poisson's ratio v) of BST, a method of measurement of the lo…
Spherical silica agglomerates possessing hierarchical porosity prepared by spray drying of MCM-41 and MCM-48 nanospheres
2003
Hierarchically ordered porous materials possessing both meso- and macropores can be obtained by agglomeration of spherical primary particles of mesoporous MCM-41 and MCM-48 materials using the spray drying technique. A highly interconnected bimodal pore network is obtained due to the intra- and inter-particle pore systems within the micron-sized spherical agglomerates. Further packing of the agglomerates will result in a three-modal hierarchical pore system, where the first level of porosity originates from the ordered mesopores inside the primary particles, the second level is a result of the particle internal porosity, and the third level is due to the voids between the agglomerates. The …
Structure of natural water-containing glasses from Lipari (Italy) and Eastern Rhodopes (Bulgaria): SAXS, WAXS and IR studies
1998
Abstract Two natural water-containing glasses with rhyolite composition originating from two different areas (perlite from Lipari, Italy, and expanded perlite from the Eastern Rhodopes, Bulgaria) have been characterised for chemical composition, atomic structure and specific surface area, with the ultimate goal of exploitation of volcanic glasses as carriers for heterogeneous metal catalysts. The two samples have similar chemical composition and total water content. The local structure, as determined by radial distribution function analysis of the wide angle X-ray scattering patterns, is similar, the medium-range structure being slightly more ordered for the Lipari glass. These results are …