Search results for "MPO"
showing 10 items of 49798 documents
Strain detection in non-magnetic steel by Kerr-microscopy of magnetic tracer layers
2018
Abstract For many applications of steel, e.g. for the evaluation of the fatigue state of components or structures, the characterization of the microscopic strain distribution in the material is important. We present a proof-of-principle for the visualization of such strain distributions by Kerr-microscopy of ferromagnetic tracer layers on nonmagnetic steel sheets. The influence of indentation induced strain on the magnetic domain pattern of 20 nm Galfenol and Permalloy tracer layers on austenitic AISI 904L steel sheets was investigated. The obtained Kerr-microscopy images show a characteristic domain pattern in the strained regions of the steel sheets, which is consistent with a dominant ma…
Experimental Investigation of Efficiency Map for an Inverter-Fed Surface-Mount Permanent Magnet Synchronous Motor
2019
Losses in inverter-fed permanent magnet motors are underestimated by using analytical or numerical approach since additional losses due to extra harmonics of the frequency converter are normally skipped. Further, losses in switches and passive components of the converter and the effect of switching frequencies cannot be numerically taken into consideration. Loss-minimizing control and proper efficiency analysis of inverter-fed permanent magnet motors cannot be achieved if an efficiency map is built based on a numerical investigation of the motors alone. This works first reviews losses in a surface-mount permanent magnet synchronous motor (SPMSM) and frequency converters. The efficiency map …
Influence of Sr addition on structural, dielectric and Raman properties of Na0.5Bi0.5TiO3ceramics
2016
ABSTRACTLead free (Na0.5Bi0.5)1-xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were produced by a conventional solid-state sintering method. X-ray diffraction analysis shows that the obtained samples possess the perovskite structure with rhombohedral symmetry. The microstructure study shows a dense structure, in agreement with the relative density (above 97%). Dielectric analysis revealed the diffuse character of the electric permittivity anomalies and their shift to a lower temperature range after Sr doping of NBT. The Raman spectra are similar for all samples in agreement with the X-ray diffraction data. The possible origin of the observed effects was discussed.
Processing, basic characterization and standard dielectric measurements on PLZT x/65/35 (2≤x≤13) ceramics
2016
ABSTRACTThe influence of external stress (0-800bar) on the dielectric properties of PLZT x/65/35 (2≤x≤13) ceramics was investigated. Applying uniaxial pressure leads to a change in the peak intensity of the electric permittivity (ϵ), of its frequency dispersion as well as in the dielectric hysteresis. The peak intensity of ϵ becomes broader and shifts to lower temperatures for PLZT x/65/35 with x = 2, 4, 6, 7, 9.75, 10, 11 and 13, with increasing pressure, on heating. It was concluded that applying uniaxial pressure induces an increase of Tm, and thus has similar effects as the increase of the Ti ion concentration in the PZT system. Results based on nanoregion switching processes under comb…
Microwave properties and structure of La–Ti–Si–B–O glass-ceramics for applications in GHz electronics
2017
Abstract A dielectric bulk glass-ceramic of the La 2 O 3 –TiO 2 –SiO 2 –B 2 O 3 system is developed which is able to fulfill the requirements for dielectric loading-based mobile communication technologies. It is shown that the given dielectric requirements can be fulfilled by glass-ceramic materials without being dependent on ceramic processing techniques. The material exhibited permittivity values of 20 ɛ r Qf τ f τ f material with a Qf value of 9500 GHz and ɛ r = 21.4 could be achieved at a ceramming temperature T cer = 870 °C. The material is aimed to provide an alternative to existing, commercially used sintered ceramic materials. Further focus is laid on the investigation of the dom…
Domain Walls Motions in Barium Titanate Ceramics
1996
The shear modulus and mechanical loss at low frequencies (0.01, 0.3, 1 Hz) are measured by an inverted pendulum for BaTiO 3 ceramic with large grain sizes. The permittivity and dielectric losses are also investigated for the same material at higher frequencies between 1 and 100 kHz as function of temperature. Those results show several relaxation peaks in the ferroelectric phases. The activation energy of each peak is obtained to be 0.29, 0.45, 0.68, 0.92 eV. The influences of strain amplitude and thermal treatments are studied specially for the mechanical relaxation peak located in the tetragonal phase. All the relaxation peaks could be associated to the interaction of oxygen vacancies in …
First-principles studies of Ni–Ta intermetallic compounds
2012
National Natural Science Foundation of China [51131002, 50772018]; Program for New Century Excellent Talents in Universities of China [NCET-07-0139]; NSERC; CRC
The effect of bias field on the dielectric response of Ba0.95Pb0.05TiO3+Со2О3
2021
The nature of the dielectric response in ferroelectric ceramics Ba0.95Pb0.05TiO3+Со2О3 (BPTC) under the influence of a constant bias field EB in the phase transition region is studied. It is found ...
Electromechanical properties of Na 0.5 Bi 0.5 TiO 3 -SrTiO 3 -PbTiO 3 solid solutions
2018
Abstract Thorough studies of electric field-induced strain are presented in 0.4Na1/2Bi1/2TiO3-(0.6-x)SrTiO3-xPbTiO3 (NBT-ST-PT) ternary solid solutions. The increase of concentration of lead x induces crossover from relaxor to ferroelectric. Strain in a relaxor state can be described by electrostrictive behavior. The electrostrictive coefficients correspond to other well-known relaxor ferroelectrics. The concentration region with a stable ferroelectric phase revealed that the polarization dependence of strain does not exhibit nonlinearity, although they are inherent to the electric field dependence of strain. In this case, electric field dependence of strain is described in terms of the Ray…
Two-phase dielectric polar structures in 0.1NBT-0.6ST-0.3PT solid solutions
2018
Abstract In this work we address the peculiarities of the macroscopic responses in ternary 0.1Na0·5Bi0·5TiO3-0.6SrTiO3-0.3PbTiO3 (0.1NBT-0.6ST-0.3PT) solid solutions. These solid solutions exhibit a spontaneous first order relaxor to normal ferroelectric phase transition. The phase transition is accompanied by a broad dielectric relaxation which expands over 10 orders of magnitude in frequency just above the phase transition temperature. The temperature dependence of polarization shows that non-zero net polarization persists above the phase transition temperature. Below the phase transition temperature, it is not possible to describe the temperature dependence of polarization with a power l…