Search results for "Materiali"
showing 10 items of 876 documents
Preparation and characterization of polyamide 6/polyethylene blend-clay nanocomposites in the presence of compatibilisers and stabilizing system
2010
Abstract Several compatibilising systems were added to high-density polyethylene (HDPE) and polyamide 6 (PA6) blends in the presence of an organically modified montmorillonite (OMM). All the blends were prepared by using a co-rotating twin-screw extruder and characterized by SEM, TEM and XRD analyses. In addition, the rheological behaviour and the mechanical properties – tensile and impact – were evaluated. The presence of OMM affects the dimensions of the polymeric phases in the blend but not their mutual adhesion, granted only by the compatibilisers. TEM, SEM and XRD analyses indicated that there is a strict correlation between the compatibilisation level and the final interlayer distance…
Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications
2021
Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer bl…
Mechanical properties of the nanometer scale pre-crystalline order of a poly (ethylene terepthalate) / poly (ethylene naphthalene) blend
2006
A previous study carried out on PET has shown that this polymer undergoes a continuous structural modification over a wide cooling rate interval when solidified from the melt[1] assuming a semi-crystalline structure below 2 K s 1 and a completely amorphous one above 100 K s 1. Most important was the existence of a state of intermediate order between the above cooling rates which was evidenced by the absence of crystalline reflections in the WAXS patterns and the occurrence of SAXS maxima[2] and exothermic peak areas (DSC) in the cooling rate range above 2 K s 1. Microhardness (MH) measurements revealed that this phase affects the mechanical properties[3] plausible if one thinks of crystalli…
Bending test for capturing the vivid behavior of giant reeds, returned through a proper fractional visco-elastic model
2015
Abstract This paper presents results of experimental investigations made to evaluate the vivid behavior of giant reed Arundo donax. In particular, attention was paid to the relationship between visco-elastic properties and moisture content, which is widely recognized as one of the key factor that influences the mechanical properties of all wood-based materials. To this aim, after a controlled drying treatment on samples of reed, stress relaxation tests in three point bending configuration were performed to evaluate the effects of moisture content on visco-elastic behavior of the giant reed. Further, the novel aspect of this paper is that of using an Euler–Bernoulli model embedded with an ad…
Structure-property relationship of PLA-Opuntia Ficus Indica biocomposites
2019
Abstract In this work, a lignocellulosic flour was achieved by grinding the cladodes of Opuntia Ficus Indica and then added to a poly-lactic acid (PLA) in order to prepare biocomposites by melt processing. The influence of filler content and size on the morphological, rheological, and mechanical properties of the green composites was assessed. Moreover, solvent-aided filler extraction enabled to evaluate the homogeneity of filler dispersion, as well as the effect of processing on the geometrical features of the fillers. The experimental data obtained by tensile tests proved to be remarkably higher than those predicted by Halpin–Tsai model, presumably due to the capability of the polymer to …
Lithium ion conducting PVdF-HFP composite gel electrolytes based on N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)-imide ionic li…
2010
Blends of PVDF-HFP and ionic liquids (ILs) are interesting for application as electrolytes in plastic Li batteries. They combine the advantages of the gel polymer electrolytes (GPEs) swollen by conventional organic liquid electrolytes with the nonflammability, and high thermal and electrochemical stability of ILs. In this work we prepare and characterize PVDF-HFP composite membranes swollen with a solution of LiTFSI in ether-functionalized pyrrolidinium-imide (PYRA12O1). The membranes are filled in with two different types of silica: i) mesoporous SiO2 (SBA-15) and a commercial nano-size one (HiSilTM T700). The ionic conductivity and the electrochemical properties of the gel electrolytes ar…
A simple interpretation of the effect of the polymer type on the properties of PMBs for road paving applications
2018
Abstract The paper presents the results of the rheological characterisation of polymer-modified bitumen for paving applications. In order to find a simple interpretation of the influence of polymer type on the blends produced, in this study high density and low density polyethylene (PE) with different chemical properties were used, as well as ethylene-vinyl acetate. The chemical characteristics of the base bitumen and the polymers used were determined by means of SARA analysis and Fourier Transform Infrared Spectroscopy, FTIR, respectively. The morphology of the produced blends was investigated by means of fluorescent light optic microscopy, while the mechanical properties were investigated…
Processing-structure-property relationships of electrospun PLA-PEO membranes reinforced with enzymatic cellulose nanofibers
2020
Abstract Three different solvent mixtures were used to prepare electrospun membranes based on polylactic acid (PLA), polyethylene oxide (PEO) and enzymatic cellulose nanofibers (CNF). The materials were characterized from a morphological, spectroscopic, mechanical and rheological point of view. Furthermore, swelling test were performed in order to assess the water uptake of each sample. The results put into evidence that the choice of the solvents affects the structure and the properties of the membranes. Among the protocols tested, using chloroform/acetone/ethanol mixture was found to allow a high degree of CNF dispersion and a good electrospinnability of polymer solutions. These features …
Rheological Response of Polyethylene/Clay Nanocomposites to Annealing Treatment
2007
The rheological response of a polyethylene/clay nanocomposite to annealing treatment under air and nitrogen atmospheres was studied. The treatment influences the rheology of the nanocomposite significantly. In particular, the viscosity and the non-Newtonian behavior dramatically increase with annealing time, and a liquid-like/solid-like transition is observed. The annealed samples were characterized by ATR-FT-IR spectrometry and it was shown that a silicate-rich layer is formed on the surface of the nanocomposite. This result was confirmed by TEM images of bulk and surface of annealed samples. It was demonstrated that the formation of this coating is the main cause of the change of rheologi…
Pinned hybrid glass-flax composite laminates aged in salt-fog environment: Mechanical durability
2019
The aim of the present paper is to study the mechanical performance evolution of pinned hybrid glass-flax composite laminates under environment aging conditions. Hybrid glass-flax fibers/epoxy pinned laminates were exposed to salt-spray fog environmental conditions up to 60 days. With the purpose of assessing the relationship between mechanical performances and failure mechanisms at increasing aging time, single lap joints at varying joint geometry (i.e., hole diameter D and hole distance E from free edge) were characterized after 0 days (i.e., unaged samples), 30 days, and 60 days of salt-fog exposition. Based on this approach, the property&ndash