Search results for "Materiali"
showing 10 items of 876 documents
PLA-based functionally graded laminates for tunable controlled release of carvacrol obtained by combining electrospinning with solvent casting
2020
Abstract A novel approach was designed to fabricate high-added value manufacts, starting from cost-effective materials and combining well-known processing techniques. Bi- and three-layered, functionally graded laminates were achieved by direct electrospinning onto dense substrates. The architecture of each multilayer comprises a dense layer formed by solvent casting, which is constituted by polylactic acid (PLA) and carvacrol, and one or two electrospun fibrous skin layers, consisting of PLA only. Processing-structure-properties relationships of such materials were investigated. As regards mechanical behavior, the amount of fibrous PLA layers determined an increase of stiffness from 20 to 3…
Effects of anodizing surface treatment on the mechanical strength of aluminum alloy 5083 to fibre reinforced composites adhesive joints
2021
Abstract In this study, the anodizing process based on the use of tartaric sulfuric acid solution (TSA) was carried out on metal substrate to evaluate for the first time its effect on the adhesion strength and corrosion resistance of aluminium alloy (i.e., AA5083) to fibre (i.e., basalt or glass) reinforced composite adhesive joints for nautical applications. Furthermore, some TSA anodized samples were soaked in a NaOH solution to investigate the influence of this post-immersion step on the joint performances. With the aim to improve the fibre-matrix adhesion in the composite substrate thus further increasing the overall mechanical response of the joint, glass and basalt fibres were treated…
Tunable release of Chlorhexidine from Polycaprolactone-based filaments containing graphene nanoplatelets
2019
Abstract Graphene nanoplatelets (GNP) as fillers and Chlorhexidine (CHX), as an antibacterial agent, were incorporated in a polycaprolactone (PCL) matrix and processed into filaments by melt spinning. The influence of both drawing and formulation on the processability, spinnability, mechanical properties and release behaviour of these materials were deeply investigated by performing rheological, morphological analysis, tensile tests, and by measuring the cumulative release of CHX in PBS at 37 °C. Furthermore, Korsmeyer–Peppas model was adopted to study the kinetics release mechanism. The results showed that adding GNP did not alter the processability and spinnability of the systems. Further…
Effect of glass fiber hybridization on the durability in salt-fog environment of pinned flax composites
2021
The aim of the present paper is to evaluate the effect of the hybridization with external layers of glass fibers on the durability of flax fiber reinforced composites in severe aging conditions. To this scope, full glass, full flax and hybrid glass–flax pinned laminates were exposed to a salt-fog environment for up to 60 days. Double-lap pinned joint tests were performed to assess the pin-hole joints performances at varying the laminate stacking sequence. In order to better discriminate the relationship between the mechanical behavior and the fracture mechanisms of joints at increasing the aging time, different geometries (i.e., by varying both the hole diameter D and the free edge distance…
Reprocessing of PLA/graphene nanoplatelets nanocomposites
2017
This work reports a study on the effect of multiple reprocessing on the properties of poly(lactic acid) (PLA) filled with graphene nanoplatelets (GnP) compared to the melt reprocessed neat polymeric matrix. In particular, morphological, X-Ray Diffraction and Micro-Raman analyses, intrinsic viscosity measurements, thermal, rheological and mechanical tests were carried out on materials reprocessed up five times by means of a single screw extruder. The results indicated that the presence of GnP decreased the degradation rate as a function of the reprocessing cycles in comparison with the neat PLA that, on the contrary, showed a more drastic reduction of the molecular weight. Moreover, the repr…
Processing, structure, property relationships and release kinetics of electrospun PLA/Carvacrol membranes
2018
Abstract In this work, polylactic acid (PLA) membranes at two different carvacrol (CRV) nominal concentration (i.e. 14 wt% and 28 wt%) were prepared via electrospinning technology. The membranes were characterized by scanning electron microscopy, ATR-FTIR and calorimetric measurements as well as tensile tests. Moreover, the release kinetics of CRV in phosphate buffered solution at 37 °C was monitored through UV–Vis measurements and the data were fitted with a power law model. Results indicated that the successful incorporation of CRV in the polymer matrix damaged the fibers morphology but increased all the mechanical parameters investigated (i.e. elastic modulus, tensile strength and elonga…
Structure–property relationship and controlled drug release from multiphasic electrospun carvacrol-embedded polylactic acid/polyethylene glycol and p…
2018
Electrospinning technologies gained considerable interest over the last decade. In this study, it is proposed a systematic study of polylactic acid/polyethylene glycol (PLA/PEG) and polylactic acid/polyethylene oxide (PLA/PEO) electrospun blends at different concentrations. The effect of blend composition and PEG molecular weight on the morphological and mechanical properties of the mats was evaluated. Furthermore, the kinetic release of carvacrol as model drug in phosphate buffer saline at 37℃ was studied and the data were then fitted using an exponential model. The scanning electron microscopy revealed that the morphology of the mats was strongly dependent on the relative ratio PLA:PEG, …
Effect of processing temperature and mixing time on the properties of PP/GnP nanocomposites
2020
Abstract During processing of molten polymers the thermal and mechanical stress acting on the melt in presence of oxygen can induce degradation with a modification of the chemical structure of the polymers. This picture can become even more relevant if the melt is a multiphasic polymer system. In this last case, the effects of the degradation depend also on the presence of a second phase and on the interactions between the two phases. In this work, the effect of the processing conditions, temperature and time, have been considered in order to investigate the thermo-mechanical and thermo-oxidative degradation of nanocomposites made by polypropylene and different contents of graphene nanoplat…
Thermo-oxidative resistant nanocomposites containing novel hybrid-nanoparticles based on natural polyphenol and carbon nanotubes
2015
Abstract Quercetin (Q), a natural antioxidant molecule, is physically immobilized onto multi-walled carbon nanotubes (CNTs) bearing covalently-linked long-chain alkyl functional groups, and the so obtained hybrid-nanoparticles are used to prepare Ultra High Molecular Weight PolyEthylene-based nanocomposite films with enhanced thermo-oxidation resistance. The effective immobilization of the Q molecules is confirmed by spectroscopic (micro-Raman, ATR-FTIR, and FTIR) and thermo-gravimetric analyses, and the influence of the nanoparticles on the rheological behaviour and thermo-oxidative stability of the nanocomposites are investigated. Rheological analyses (linear viscoelasticity and stress re…
Physical properties of virgin-recycled ABS blends: Effect of post-consumer content and of reprocessing cycles
2012
Abstract Virgin/post-consumer ABS (pc-ABS) blends were re-processed and re-formed up to three times. The effect of pc-ABS content and of reprocessing cycles on the physical properties of the prepared blends was evaluated by mechanical tests (tensile, flexural and impact tests) and by rheological and thermo-mechanical measurements. The processability of pc-ABS blends was not substantially different by that of virgin ABS up to two recycling steps even if the third one induced a slightly decrease of viscosity, more remarkable on increasing the pc-ABS content. The mechanical and thermo-mechanical properties of the samples worsened on increasing the level of pc-ABS and after each reprocessing op…