Search results for "Materiali"

Natural Fibres and Their Composites.

2020

Due to several promising properties, such as their low density and specific properties, low price, easy processing, health advantages, renewability and recyclability, increasing attention was paid in the last years to natural fibres as alternatives to synthetic counterparts for the reinforcement of polymeric based composites [...]

Salt spray fog ageing of hybrid composite/metal rivet joints for automotive applications

2017

Abstract The present experimental investigation aims to investigate the effect of salt-fog exposition on the mechanical behaviour of composite/metal riveted joints. To this aim, two kinds of joint were exposed to salt-fog environmental conditions according to ASTM B117 standard, for fifteen weeks. In particular, two composite laminates (i.e. glass fibre and carbon fibre/epoxy composites) were used as composite substrate joined with the metal substrate (i.e. aluminium alloy Al 6060). Single-lap shear tests were carried out in order to evaluate the evolution of the mechanical performances and the damage mechanisms of the riveted joints during the ageing exposition. The results evidence that t…

Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding

2017

Abstract Aging resistance of jute reinforced laminates is compared with two jute/basalt hybrid laminates prepared with different stacking sequences (i.e., sandwich and intercalated configuration). To this aim, composites are exposed to cyclic conditions comprising hygrothermal stress and UV radiation to promote an accelerated aging, for a period of 84 days. Specimens of each laminate are tested after 14, 28, 56 and 84 days, respectively. Quasi-static flexural tests, Charpy impact tests and dynamic mechanical tests are performed according to international ASTM and ISO standards. Furthermore, scanning electron microscopy and differential scanning calorimetry are used to evaluate the morpholog…

Synthesis and thermoelectric characterisation of bismuth nanoparticles

2009

An effective method of preparation of bismuth nanopowders by thermal decomposition of bismuth dodecyl-mercaptide Bi(SC12H25)3 and preliminary results on their thermoelectric properties are reported. The thermolysis process leads to Bi nanoparticles due to the efficient capping agent effect of the dodecyl-disulfide by-product, which strongly bonds the surface of the Bi clusters, preventing their aggregation and significantly reducing their growth rate. The structure and morphology of the thermolysis products were investigated by differential scanning calorimetry, thermogravimetry, X-ray diffractometry, 1H nuclear magnetic resonance spectroscopy, scanning electron microscopy, and energy dispe…

Recycling polymer blends

2014

Nanomechanical Properties of Epoxy Composites with Carbon Fillers

2013

The key point of this study is investigation of nanomechanical properties of epoxy-based nanocomposites filled with different kinds of carbon nanofillers like exfoliated graphite, high surface-area carbon black, single-walled carbon nanotubes and multi-walled carbon nanotubes

Improving the material quality of silicon ingots by aluminum gettering during crystal growth

2016

We present a method for the purification of silicon ingots during the crystallization process that reduces significantly the width of the low charge carrier lifetime region at the ingot top. The back-diffusion of impurities from the ingot top is suppressed by adding a small amount of pure aluminum into the silicon melt right at the end of the solidification. We study the aluminum gettering effect by instrumental neutron activation analysis (INAA) and Fei imaging. Furthermore, we present a model for aluminum gettering of Fe in the silicon ingot that is in agreement with literature data for aluminum gettering at lower temperature. The distribution of iron in the ingots with and without alumin…

Tunable radical scavenging activity of carbon nanotubes through sonication

2016

Abstract Carbon nanotubes (CNTs) having controlled radical scavenging activity have been achieved tuning the content of their lattice defects induced by an ultra-sound (us) treatment. The reactivity of CNTs, subjected to ultra-sonication for different time intervals, toward 1,1-diphenyl-2-pycryl (DPPH) and hydroxyl (•OH) radicals has been estimated and related to defect concentration, evaluated through Raman spectrometry. The radical scavenging efficiency of ultra-sound treated CNTs (us-CNTs) increases with increasing the content of the structural defects, suggesting that the defect resulting from us treatment can be capitalized to obtain an amplified and controlled radical scavenging activ…

Geometry and stacking sequence effect on composite spinnaker pole’s stiffness: experimental and numerical analysis

2006

Composite materials are widely employed in sailing sports, a possible application is for the mast pole or other sail poles. In the paper the attention is focused on the spinnaker poles mechanical performances; in particular the focus is on axial and ring compressive properties of three different carbon fibre/epoxy resin spinnaker poles, to investigate both the diameter and stacking sequence effect on the mechanical performance of the structure. Starting from the stacking sequence used in the production of a particular spinnaker pole, the effect of a lamina at 0- in the middle of wall thickness is investigated with the purpose to obtain a more stiff structure. Moreover to test the proposed s…

Evaluation of continuous filament mat influence on the bending behaviour of GFRP pultruded material via Electronic Speckle Pattern Interferometry

2017

Abstract Pultrusion is a process allowing the production of unidirectional (roving) fibre-reinforced polymer (FRP) structural elements with constant cross section. Recently, also civil engineers focused their attention on pultruded composite materials as alternative to traditional ones (e.g., concrete, steel). Furthermore, to improve the transverse strength and stiffness with respect to the fibres direction, continuous filament mat (CFM) is often placed within the stacking sequence. The CFM influence on the global mechanical behaviour is not considered by appropriate actual international standards. In this paper, the influence of the CFM layers on the mechanical behaviour of glass fibres pu…