Search results for "Matrix"
showing 10 items of 3205 documents
Evaluation of the influence of light-curing units on the degree of conversion in depth of a bulk-fill resin.
2020
Background It is known that bulk-fill have been widely studied and used by dentists in the clinic. However, the use of light-curing units that do not have the ability to adequately light-cure these materials at the appropriate depth can affect their clinical performance. The aim of this study was evaluating the influence of 5 different light curing units (LCUs) on the degree of conversion (DC) of a bulk-fill resin at depths of 0 to 4 mm and determined the effect of using 20s exposure and 40s. Material and methods Cylinders of composite were made in a stainless steel matrix (n=10). The specimens were exposed from the top surface using 5 LCUs: Valo® Cordless (VA); Radii Plus (RA); Emitter.D (…
Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding
2017
Abstract Aging resistance of jute reinforced laminates is compared with two jute/basalt hybrid laminates prepared with different stacking sequences (i.e., sandwich and intercalated configuration). To this aim, composites are exposed to cyclic conditions comprising hygrothermal stress and UV radiation to promote an accelerated aging, for a period of 84 days. Specimens of each laminate are tested after 14, 28, 56 and 84 days, respectively. Quasi-static flexural tests, Charpy impact tests and dynamic mechanical tests are performed according to international ASTM and ISO standards. Furthermore, scanning electron microscopy and differential scanning calorimetry are used to evaluate the morpholog…
Photochemical synthesis of pyrene perfluoroalkyl derivatives and their embedding in a polymethylmethacrylate matrix: a spectroscopic and structural s…
2014
A photochemical, alternative and eco-compatible approach to perfluoroalkyl derivatives of pyrene is presented. The perfluoroalkyl chain is regiospecifically introduced at the 1 position of pyrene. The synthesized products have been embedded in a polymethylmethacrylate matrix by photocuring at 365 nm. Both the photochemical reactions can be considered a “green tool” for the synthetic chemist in order to obtain materials with prospective optoelectronic applications. The so-obtained composites have been the object of a study by UV and fluorescence spectroscopy in order to explore their luminescence properties. The small angle X-ray scattering and the transmission electron microscopy techniques…
Glassy PEEK‐WC vs Rubbery Pebax®1657 Polymers: Effect on the Gas Transport in CuNi‐MOF Based Mixed Matrix Membranes
2020
Mixed matrix membranes (MMMs) are seen as promising candidates to overcome the fundamental limit of polymeric membranes, known as the so-called Robeson upper bound, which defines the best compromise between permeability and selectivity of neat polymeric membranes. To overcome this limit, the permeability of the filler particles in the MMM must be carefully matched with that of the polymer matrix. The present work shows that it is not sufficient to match only the permeability of the polymer and the dispersed phase, but that one should consider also the individual contributions of the diffusivity and the solubility of the gas in both components. Here we compare the gas transport performance o…
Effect of the loading rate on ultimate strength of composites. Application: Pressure vessel slow burst test
2013
International audience; The strength of unidirectional elastic fibre composites is shown to depend on the loading rate as the viscoelastic nature of the matrix results in a fall in breaking load as the rate is reduced. The simulation of the accumulation of fibre breaks leading to failure, takes into account all physical phenomena involved fibre failure, including the stochastic nature of fibre strength, stress transfer through the matrix between reinforcements, interfacial debonding and the viscoelastic nature of the matrix. The kinetics of composite failure are seen to involve the initial formation of random fibre breaks which at higher loads coalesce into clusters of broken fibres. The ra…
Dynamics of the incorporation of Co into the wurtzite ZnO matrix and its magnetic properties
2015
Made available in DSpace on 2022-04-29T07:25:55Z (GMT). No. of bitstreams: 0 Previous issue date: 2015-07-25 Financiadora de Estudos e Projetos Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Abstract Bulk Co-doped ZnO (Zn1-xCoxO) samples were prepared and studied with particular emphasis on their compositions, structures, and magnetic properties. A detailed microstructural analysis was conducted to investigate the nature of Co incorporation into the wurtzite ZnO matrix. The Zn1-xCoxO ceramic samples were prepared using the standard solid-state reaction method with different Co molar concentrations of u…
Influence of Plastic Deformation on the Corrosion Behaviour of As-Cast AlMg2 and AlCu4Mg1 Aluminium Alloys in NaCl Solution
2015
The influence of plastic deformation on the corrosion behavior of as-cast AlMg2 and AlCu4Mg1 aluminum alloys was studied at the microscale using the Electrochemical Microcell Technique and surface microgauges. It was shown that large strain gradients develop locally. The corrosion behavior of both alloys was affected by plastic deformation. The most active sites contain large strain gradients in AlMg2 and cracks with damage in the matrix in AlCu4Mg1.
Empirical model for stress ratio effect on fatigue delamination growth rate in composite laminates
2004
An empirical model is proposed for the stress ratio effect on the fatigue delamination growth rate in composite laminates under single-mode loading, intending to provide a simple and accurate description tool in engineering application. The model is based on heuristic considerations of damage accumulation ahead of the crack. Linear cumulative assumption is used for damage estimation. Comparison of the prediction based on the proposed model with the test results for different carbon, glass, and alumina fibre-reinforced composites at several stress ratios shows reasonable agreement.
Cutting performance and indentation behaviour of diamond films on Co-cemented tungsten carbide
2000
Abstract Diamond films were grown by Hot Filament Chemical Vapour Deposition (HFCVD) on differently pretreated ISO-grade K10 cemented carbide (WC-5.8 wt.%Co) cutting inserts. Etching with diluted HNO3 and surface roughening by Murakami's reagent were used as substrate pretreatments. The adhesion of the films was evaluated by indentation tests. In order to obtain a reliable estimation of the adhesion by the slope of the crack radius–indentation load curves, a careful SEM measurement of the crack lengths was performed. Bare and diamond-coated cutting inserts were used for turning tests of Al2O3-reinforced aluminum alloy. The adhesion levels obtained from the indentation curves correlated well…
Effect of the fiber geometry on the pullout response of mechanically deformed steel fibers
2013
Abstract A simple model to predict the influence of fiber geometry on the pullout of mechanically deformed steel fibers from cementitious matrix is proposed. During the pullout the mechanically deformed fiber is subjected to repetitive bending and unbending which cause an increase of the tension in the fiber. This increase of the tension depends on the amount of plastic work needed to straighten the fiber during pullout. The model input parameters are mechanical and geometrical properties of mechanically deformed fibers. Model predictions were compared to the experimental results on the hooked-end and crimped steel fiber pullout and good agreement was observed.