Search results for "Measurement"
showing 10 items of 2918 documents
Enhanced chemiluminescent determination of chloramphenicol and related nitro compounds by ‘on-line’ photochemical reaction
2000
The viability of tandem photochemical reaction-chemiluminescence detection was studied for a heterogeneous family of nitro compounds using chloramphenicol as a test substance. The 'on-line' chemical photodegradation of chloramphenicol was performed in a flow injection assembly by using a photoreactor consisting of a 725 cm x 0.5 mm id piece of PTFE tubing coiled around an 8 W low-pressure mercury lamp. Photodegraded chloramphenicol was detected by oxidizing photo-fragments from the parent compound and their subsequent reaction with a luminol-Co(II) system. The calibration graph was linear up to 3 x 10(-5) mol l-1 chloramphenicol, the limit of detection was 3 x 10(-9) mol l-1, the relative s…
Photoelectrochemical Evidence of Cu2O/TiO2 Nanotubes Hetero-Junctions formation and their Physicochemical Characterization
2014
Cu2O/TiO2 nanotubes heterojunctions were fabricated by electrochemical deposition of cuprous oxide on TiO2 nanotubes arrays grown by anodizing. X-ray diffraction and Raman Spectroscopy analysis allows for identification of Cu2O, whose morphological features were studied by Scanning Electron Microscopy as a function of the charge circulated during the electrodeposition step. Photoelectrochemical measurements in aqueous solutions evidenced a red shift of the light absorption threshold of TiO2 nanotubes due to the presence of cuprous oxide even for very low circulated charges, while electrochemical impedance measurements proved a significant reduction of the electrode impedance due the presenc…
Erroneous p-type assignment by Hall effect measurements in annealed ZnO films grown on InP substrate
2013
We report on incorrect carrier type identification achieved by Hall effect measurements performed on ZnO films grown by pulsed laser deposition on InP substrates and subsequently annealed for 1 h at 600 C in air. While Hall measurements, after post-growth annealing, reveal a change in the electrical properties of the films, from n-type to p-type, both photocurrent-based and standard C V measurements performed on the same samples show no change in the native n-type doping of the ZnO films. A possible interpretation of the two results is reported. In particular, p-type conductivity observed by Hall effect may be ascribed to a highly conductive thin layer formed during the annealing process at…
Luminescence properties of nonbridging oxygen hole centers at the silica surface
2009
Abstract Two variants of the surface-nonbridging oxygen hole center, ( Si–O)3Si–O• and ( Si–O)2(H–O)Si–O•, stabilized in porous films of silica nano-particles were investigated by time resolved luminescence excited in the visible and UV spectral range by a tunable laser system. Both defects emit a photoluminescence around 2.0 eV with an excitation spectrum evidencing two maxima at 2.0 and 4.8 eV, this emission decreases by a factor ∼2 on increasing the temperature from 8 up to 290 K. However, the different local structure influences the emission lineshape, the quantum yield and the decay lifetime. Such peculiarities are discussed on the basis of the symmetry properties of these defects.
Photoluminescent hybrid nanomaterials from modified halloysite nanotubes
2018
The synthesis of photoluminescent nanomaterials based on halloysite nanotubes is described. The obtained hybrid was characterized by means of TGA, FT-IR, DLS and XPS measurements; in addition its morphology was imaged by TEM and HR-TEM. The HNT hybrid also exhibited photoluminescent properties, both in solution and in the solid state, and white-light emission (0.24, 0.36; CIE coordinates) was observed. This work could be pioneering as a new strategy for manufacturing both LEDs and fluorescent tags based on HNT nanomaterials. © 2018 The Royal Society of Chemistry.
Isoelectronic series of oxygen deficient centers in silica: experimental estimation of homogeneous and inhomogeneous spectral widths
2008
We report nanosecond time-resolved photoluminescence measurements on the isoelectronic series of oxygen deficient centers in amorphous silica related to silicon, germanium and tin atoms, which are responsible of fluorescence activities at approximately 4 eV under excitation at approximately 5 eV. The dependence of the first moment of their emission band on time and that of the radiative decay lifetime on emission energy are analyzed within a theoretical model able to describe the effects introduced by disorder on the optical properties of the defects. We obtain separate estimates of the homogeneous and inhomogeneous contributions to the measured emission line width, and we derive homogeneou…
Luminescence and absorption spectroscopy of Sn-related impurity centers in silica
2006
We report an experimental study on the absorption and luminescence spectra of oxygen deficient point defects in Sn-doped silica. The absorption band at 4.9 eV (B2β band) and the two related photoluminescence bands at ∼4.2 eV (singlet-singlet emission, S1 → S0) and at ∼3.2 eV (triplet-singlet emission, T1 → S0), linked by a thermally activated T1 → S1 inter-system crossing process (ISC), are studied as a function of temperature from 300 to 20 K. This approach allows us to investigate the dynamics properties of the matrix in the surroundings of the point defects and the effects of local disorder on the two relaxation processes from S1: the radiative channel to S0 and the ISC process to T1. We…
Photoluminescence transient study of surface defects in ZnO nanorods grown by chemical bath deposition
2015
Two deep level defects (2.25 and 2.03 eV) associated with oxygen vacancies (Vo) were identified in ZnO nanorods (NRs) grown by low cost chemical bath deposition. A transient behaviour in the photoluminescence (PL) intensity of the two Vo states was found to be sensitive to the ambient environment and to NR post-growth treatment. The largest transient was found in samples dried on a hot plate with a PL intensity decay time, in air only, of 23 and 80 s for the 2.25 and 2.03 eV peaks, respectively. Resistance measurements under UV exposure exhibited a transient behaviour in full agreement with the PL transient, indicating a clear role of atmospheric O-2 on the surface defect states. A model fo…
Can we use time-resolved measurements to get Steady-State Transport data for Halide perovskites?
2018
Time-resolved, pulsed excitation methods are widely used to deduce optoelectronic properties of semiconductors, including now also Halide Perovskites (HaPs), especially transport properties. However, as yet, no evaluation of their amenability and justification for the use of the results for the above-noted purposes has been reported. To check if we can learn from pulsed measurement results about steady-state phototransport properties, we show here that, although pulsed measurements can be useful to extract information on the recombination kinetics of HaPs, great care should be taken. One issue is that no changes in the material are induced during or as a result of the excitation, and anothe…
Green phosphorescence and electroluminescence of sulfur pentafluoride-functionalized cationic iridium(III) complexes
2015
EZ-C acknowledges the University of St Andrews for financial support. We report four cationic iridium(III) complexes [Ir(C^N)2(dtBubpy)](PF6) that have sulfurpentafluoride-modified 1-phenylpyrazole and 2-phenylpyridine cyclometalating (C^N) ligands (dtBubpy = 4,4'-di-tert-butyl-2,2'-bipyridyl). Three of the complexes were characterized by single-crystal X-ray structure analysis. In cyclic voltammetry, the complexes undergo reversible oxidation of iridium(III) and irreversible reduction of the SF5 group. They emit bright green phosphorescence in acetonitrile solution and in thin films at room temperature, with emission maxima between 482–519 nm and photoluminescence quantum yields of up to 7…