Search results for "Mechanical engineering"
showing 10 items of 4245 documents
A simple method to fabricate high-performance nanostructured WO3 photocatalysts with adjusted morphology in the presence of complexing agents
2017
[EN] The rich and complex chemistry of tungsten was employed to synthesize innovative WO3 nanoplatelets/nanosheets by simple anodization in acidic electrolytes containing different concentrations of complexing agents or ligands, namely F- and H2O2. The morphological and photoelectrochemical properties of these nanostructures were characterized. The best of these nanostructures generated stable photocurrent densities of ca. 1.8 mA cm(-2) at relatively low bias potentials (for WO3) of 0.7 V-Ag/AgCl under simulated solar irradiation, which can be attributed to a very high active surface area. This work demonstrates that the morphology and dimensions of these nanostructures, as well as their ph…
Virtual element method for computational homogenization of composite and heterogeneous materials
2020
Abstract In this study, a two-dimensional multi-region framework, based on the use of the Virtual Element Method (VEM), is developed for computational materials homogenization and applied to different classes of widely employed heterogeneous materials. The VEM has recently emerged as a powerful generalisation of the Finite Element Method capable of dealing with very general polygonal mesh elements, including non-convex or highly distorted elements. Such features are appealing for the treatment of problems whose analysis domains present complex or statistical morphological features, which would generally require careful and time-consuming mesh/data preparation and regularization. In this wor…
A Fiber Optic Strain Gage Sensor for Measuring Preload in Thick Composite Bolted Joints
2019
Mechanical fastening is a popular choice in joining composites because of the ability to transfer high loads and the ease of assembly and disassembly. In this study, the failure behavior of composite–aluminum single lap bolted joint is investigated. In particular, the effects of varying the preload on the bolt are examined. In order to accurately measure the preload, a specialized sensor that uses a fiber Bragg grating sensor embedded in the bolt is proposed and created. This sensor is realized for the current tests but can be expanded to other applications. An experimental study of bolted single-lap joints varying the tightening torque value has been carried out and, in order to validate t…
Preparation and characterisation of Ce:YAG -polycarbonate composites for white LED
2016
Ce:YAG-polycarbonate composites were prepared with several amounts of Ce:YAG in the range 0.1-5 wt.% by using melt compounding. The structure and morphology of the composites were investigated by means of X-ray diffractometry and transmission electron microscopy. The optical properties of the composites were studied by using photoluminescence spectroscopy. The intermolecular interaction between the polymer and the filler surface was investigated using 13C cross-polarization magic-angle spinning NMR spectroscopy (13C {1H} CP-MAS NMR). The results showed that the dispersion of the particles in the polymer, and the optical properties, depend on the Ce:YAG amount. The composites were combined w…
Inhibitoren der Korrosion 31 (1). Beitrag zur Inhibierung der Korrosion von Zink und Messing
1986
Folgende als Inhibitoren der Korrosion vom Kupfer bewahrte Verbindungen wurden bei Korrosionsstudien mit Zink und Messing eingesetzt: 2-Aminopyrimidin (A), 5-Aminotetrazolmonohydrat (B), Benzotriazol (C), Kupferron (D), 2-Mercaptopyrimidin (E), 2-Mercaptothiazolin (F), 2-Methyl-4-amino-5-cyanopyrimidin (G), Tetrazin-B (H) und Xanthanwasserstoff (I). Bei Zinkblechen wird unter Standardbedingungen in Gegenwart der Verbindungen A, B, C, E und G im Laufe von 15 Tagen Totalkorrosion beobachtet. In Anwesenheit der Verbindungen D, F und H werden prozentuale Schutzwerte von 29%, 14% und 39% beobachtet. Ein differenzierteres Bild vermitteln die pH-statisch ermittelten Saureverbrauchs-Zeit-Kurven mit…
The effect of through-thickness compressive stress on mode II interlaminar fracture toughness
2017
Abstract The effect of through-thickness compressive stress on mode II interlaminar fracture toughness is investigated experimentally and replicated numerically. The modified Transverse Crack Tensile specimen recently proposed by the authors is used, together with an experimental device designed to apply a constant transverse compressive stress on the surface of the specimen. Experiments are conducted using IM7/8552 specimens for different compressive stresses, ranging from 0 to 100 MPa, covering all the practical applications commonly encountered in the aeronautical industry (e.g., tightened filled holes or bolted joints). It is shown that mode II interlaminar fracture toughness increases …
Regional variation of wall shear stress in ascending thoracic aortic aneurysms.
2014
The development of an ascending thoracic aortic aneurysm is likely caused by excessive hemodynamic loads exerted on the aneurysmal wall. Computational fluid-dynamic analyses were performed on patient-specific ascending thoracic aortic aneurysms obtained from patients with either bicuspid aortic valve or tricuspid aortic valve to evaluate hemodynamic and wall shear parameters, imparting aneurysm enlargement. Results showed an accelerated flow along the outer aortic wall with helical flow in the aneurysm center for bicuspid aortic valve ascending thoracic aortic aneurysms. In a different way, tricuspid aortic valve ascending thoracic aortic aneurysms exhibited normal systolic flow without su…
Efficient parallel computations of flows of arbitrary fluids for all regimes of Reynolds, Mach and Grashof numbers
2002
This paper presents a unified numerical method able to address a wide class of fluid flow problems of engineering interest. Arbitrary fluids are treated specifying totally arbitrary equations of state, either in analytical form or through look‐up tables. The most general system of the unsteady Navier–Stokes equations is integrated with a coupled implicit preconditioned method. The method can stand infinite CFL number and shows the efficiency of a quasi‐Newton method independent of the multi‐block partitioning on parallel machines. Computed test cases ranging from inviscid hydrodynamics, to natural convection loops of liquid metals, and to supersonic gasdynamics, show a solution efficiency i…
A Random Trajectory Approach for the Development of Nonstationary Channel Models Capturing Different Scales of Fading
2017
This paper introduces a new approach to developing stochastic nonstationary channel models, the randomness of which originates from a random trajectory of the mobile station (MS) rather than from the scattering area. The new approach is employed by utilizing a random trajectory model based on the primitives of Brownian fields (BFs), whereas the position of scatterers can be generated from an arbitrarily 2-D distribution function. The employed trajectory model generates random paths along which the MS travels from a given starting point to a fixed predefined destination point. To capture the path loss, the gain of each multipath component is modeled by a negative power law applied to the tra…
Throughput and delay analysis of HARQ with code combining over double Rayleigh fading channels
2018
This paper proposes the use of hybrid automatic repeat request (HARQ) with code combining (HARQ-CC) to offer reliable communications over double Rayleigh channels. The double Rayleigh fading channel is of particular interest to vehicleto-vehicle communication systems as well as amplify-and-forward relaying and keyhole channels. This paper studies the performance of HARQ-CC over double Rayleigh channels from an information theoretic perspective. Analytical approximations are derived for the ϵ-outage capacity, the average number of transmissions, and the throughput of HARQ-CC. Moreover, we evaluate the delay experienced by Poisson-arriving packets for HARQ-CC. We provide analytical expression…