Search results for "Mechanical properties"
showing 10 items of 199 documents
Carbon Fiber Composites Cured by γ-Radiation-Induced Polymerization of an Epoxy Resin Matrix
2008
The use of ionizing radiation in order to initiate polymerization of suitable monomers has found increased interest in the last two decades due to its several advantages. In this work, carbon fiber composites through gamma radiation polymerization of epoxy matrices have been produced for aerospace and advanced automotive applications. Composite samples were produced by irradiation at room temperature using different radiation doses and, as reference, thermal curing of the same epoxy resin formulations was also carried out. Furthermore, some irradiated samples were subjected to postirradiation thermal curing to complete the polymerization reactions. The properties of the cured materials were…
Green composites of organic materials and recycled post-consumer polyethylene
2004
International audience; Addition of organic fillers to post‐consumer recycled plastics can give rise to several advantages. First of all, the cost of these fillers is usually very low, the organic fillers are biodegradable contributing to an improved environmental impact and, last but not least, some mechanical and thermomechanical properties can be enhanced. Organic fillers are not widely used in the plastic industry although their use is increasing. Bad dispersion into the polymer matrix at high‐level content and poor adhesion with the matrix are the more important obstacles to this approach. In this work various organic fillers have been used with a post‐consumer plastic material origina…
Bionanocomposite Blown Films: Insights on the Rheological and Mechanical Behavior.
2021
In this work, bionanocomposites based on two different types of biopolymers belonging to the MaterBi® family and containing two kinds of modified nanoclays were compounded in a twin-screw extruder and then subjected to a film blowing process, aiming at obtaining sustainable films potentially suitable for packaging applications. The preliminary characterization of the extruded bionanocomposites allowed establishing some correlations between the obtained morphology and the material rheological and mechanical behavior. More specifically, the morphological analysis showed that, regardless of the type of biopolymeric matrix, a homogeneous nanofiller dispersion was achieved
Integrated ternary bionanocomposites with superior mechanical performance via the synergistic role of graphene and plasma treated carbon nanotubes
2019
Abstract Herein, we prepared an integrated ternary bionanocomposite based on polylactic acid (PLA) as a host polymer and two different forms of carbon fillers, i.e. graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs), used simultaneously at extremely low concentrations, relying on the synergistic effect of CNT and graphene nanoreinforcement and a novel, multi-step procedure to achieve a high level dispersion. The results indicated that this multi-step approach allows stiffness increments up to +66%, with simultaneous enhancement of tensile strength (up to +44%), and elongation at break (up to +36%) with respect to neat PLA, by adding an extremely low content (0.5 wt%) of a hybrid comb…
Improvements in aggregate-paste interface by the hydration of steelmaking waste in concretes and mortars
2019
[EN] The objective of the experimental work is to study the mechanical properties in self-compacting concretes (SCC) in which part of the limestone aggregate has been replaced by granulated blast furnace slag (GBFS) in different percentages ranging from 0% to 60%. The results show that at early ages the SCC with the largest content in slag tend to have lower compressive strengths due to the poor compacting of the aggregates, although in the long-term their strength increases due to the reactivity of the slag. In fact, at the age of 365 days, the mortars made with the substitution of 50% of cement by ground GBFS reach compressive strength similar to that of the mortar made with 100% of cemen…
Mechanical Properties of CNT/Polymer
2018
Abstract The high mechanical properties, the stiffness-to-weight and strength-to-weight make the carbon nanotubes a perfect reinforcing agents in advanced composites. This interesting potential has attracted the attention of both industry and academia that have committed to this research field an impressive amount of work. Several applications of carbon nanotubes enriched polymer composites have already been seen: aerospace structures, sporting goods, automotive components, medical devices, optical barriers, photovoltaic devices, conducting plastics, electromagnetic interference shielding, efficient electrostatic painting of plastics, composite mirrors, plastics with high thermal dissipatio…
Filling carbon nanotubes with magnetic particles
2013
Magnetic carbon nanotube composites were obtained by filling carbon nanotubes with paramagnetic iron oxide particles. Measurements indicate that these functionalized nanotubes are superparamagnetic at room temperature. Details about the production and characterization of these materials are described along with the experimental procedures employed. These magnetic carbon nanotubes have the potential to be used in a wide range of applications, in particular, the production of nanofluids, which can be controlled by appropriate magnetic fields.
Effects of Bending on Raman-active Vibration Modes of Carbon Nanotubes
2008
We investigate vibration modes and their Raman activity of single-walled carbon nanotubes that are bent within their intrinsic elastic limits. By implementing novel boundary conditions for density-functional based tight-binding, and using non-resonant bond polarization theory, we discover that Raman activity can be induced by bending. Depending on the degree of bending, high-energy Raman peaks change their positions and intensities significantly. These effects can be explained by migration of nodes and antinodes along tube circumference. We discuss the challenge of associating the predicted spectral changes with experimental observations.
Electrical conductance of carbon nanotubes with misaligned ends
2013
During a manufacturing process, when a straight carbon nanotube is placed on a substrate, e.g., production of transistors, its two ends are often misaligned. In this study, we investigate the effects of multiwall carbon nanotubes’ (MWCNTs) outer diameter and chirality on the change in conductance due to misalignment of the two ends. The length of the studied MWCNTs was 120 nm, while the diameters ranged between 4 and 7 nm. A mixed finite element-tight-binding approach was carefully designed to realize reduction in computational time by orders of magnitude in calculating the deformation-induced changes in the electrical transport properties of the nanotubes. Numerical results suggest that ar…
Nitrogen Hydrate Cage Occupancy and Bulk Modulus Inferred from Density Functional Theory-Derived Cell Parameters
2021
International audience; Gas clathrate hydrate solid materials, ubiquitous in nature as found either on the ocean floor, permafrost on the Earth, or in extraterrestrial planets and comets, are also technologically relevant, for example, in energy storage or carbon dioxide sequestration. Nitrogen hydrate, in particular, is of great interest as a promoter of the kinetics of the methane replacement reaction by carbon dioxide in natural gas hydrates. This hydrate may also appear in the chemistry of planets wherever nitrogen constitutes the majority of the atmosphere. A fine understanding of the stability of this hydrate under various thermodynamic conditions is thus of utmost importance to asses…