Search results for "Medium"
showing 10 items of 3746 documents
Using infrared thermography in order to compare laser and hybrid (laser plus MIG) welding processes
2009
International audience; In order to deepen the understanding of the differences between laser and laser-arc hybrid welding, comparisons were undertaken using thermography. The experiments were carried out for a T assembly of aluminium alloy plates. Modelling, based on the finite element method approach, was realized using IR temperature measurements and seam geometry. For a value of the power supply, depicted as a surface source in the hybrid case, agreement was found between simulated and measured temperatures. The arc power supply efficiency value is similar to the usually used value.
The application of the random balance method in laser machining of metals
2008
International audience; Features peculiar to laser technology offer some advantages over more traditional processes, but, like all processes, it has its limitations. This article studies the limitations of laser machining of metals, and quantifies, through an experimental design method, the influence of operating parameters on productivity and on the quality of the machined surface. Three study materials were used: an aluminium alloy, stainless steel and a titanium alloy. An initial reading of the results indicates that productivity depends mainly on the frequency of the laser pulse and that the aluminium alloy behaves differently from the other two. The quality of the machined surface, jud…
Effect of active heating and cooling on microstructure and mechanical properties of friction stir–welded dissimilar aluminium alloy and titanium butt…
2019
A butt joint configuration of AA6061–pure Ti was welded using friction stir welding (FSW) with an assisted cooling and heating conditions, aiming to attain a flawless joint. Cooling-assisted friction stir welding (CFSW) was carried out with a different cooling medium such as CO2, compressed air and water at controlled flow rate. However, heating-assisted friction stir welding (HFSW) was performed with heating source of GTAW torch just before FSW tool at different current density. Prepared specimens were subjected to optical microscopy (OM), scanning electron microscopy (SEM) and electrodischarge spectroscopy (EDS) for microstructural characterizations. The tensile strength and microhardness…
Innovative method to estimate state of charge of the hydride hydrogen tank: application of fuel cell electric vehicles
2021
International audience; Significant attention has been paid to metal hydrides (MH) as an environmentally friendly and safe way to store hydrogen. This technology has considerable potential for the application of embedded hydrogen storage in fuel cell electric vehicles, but its widespread application faces a major problem in terms of estimating the remaining hydrogen amount in the tank. In this work, a new method is proposed for estimating the state of charge (SoC) of the hydrogen hydride tank (HHT) by application of piezoelectric material. The idea is to cover the entire inner wall of the metal-hydride tank with a layer of piezoelectric material. During the process of hydrogen absorption, t…
Contactless generation of cavitation in high temperature liquid metals and its impact on particle dispersion in solidified iron and steel samples
2021
Abstract A recently developed method for the contactless magnetic generation of cavitation is demonstrated for high-melting-point metals. The approach is based on the floating-zone technique, which is truly contactless and crucible-free as it uses electromagnetic forces. Using this method, ultra-high-temperature ceramic particles, such as TiN, TiB2 and TiC, are admixed in liquid iron and 316L steel. The dispersion and particle refinement caused by cavitation treatment during melting and solidification are investigated. Magnetic fields up to 8 T that correspond to pressure oscillation amplitude of 0.83 MPa are used. The signal emitted by the collapsing bubbles is captured and visualized for …
Aluminium sheet metal scrap recycling through friction consolidation
2019
Abstract In the last decades, several direct-recycling techniques have been developed and investigated in order to avoid material remelting, typical of the conventional aluminum alloys recycling processes. Moreover, the remelting step for aluminum recycling is affected by permanent material losses. Solid-state recycling processes have proven to be a suitable strategy to face such issues. Friction Consolidation is an innovative solid state-recycling technology developed for metal chips. During the process, a rotating die is plunged into a hollow chamber containing the material to be processed. The work of friction forces decaying into heat soften the material and, together with the stirring …
An energy efficiency analysis of Single Point Incremental Forming as an Approach for Sheet Metal Based Component Reuse
2020
Abstract Producing materials causes about 25% of all anthropogenic CO2 emissions. Metals play a significant role, steel and aluminum account for 24% and 3% of worldwide material related emissions respectively. Fostering resources efficiency strategies in the field of sheet components could lead to a significant environmental impact reduction. Reshaping could be one of the most efficient strategy to foster material reuse and lower the environmental impact due to material production. Specifically, for aluminum recycling, the overall energy efficiency of conventional route is very low and, more importantly, permanent material losses occur during re-melting because of oxidation. The present pap…
Kinetic, isotherm and thermodynamic studies of the adsorption of methylene blue dye onto agro-based cellulosic materials
2015
AbstractThe purpose of this work is to establish the optimal experimental conditions for the removal of methylene blue (MB-as model basic dye) from aqueous solution by adsorption onto four agro-based materials, namely, cedar sawdust, pine sawdust, wheat straw, and Provence cane Arundo donax. Results show that an increase in acidity or ionic strength of the medium has generally a negative effect on the discoloration yield. From the data of pH effect, there is no need to change the initial pH of the MB solution to be treated. Equilibrium was reached after 20−30 min of agitation when cedar sawdust, pine sawdust, and Provence cane are used as adsorbents. However, in the case of wheat straw, an …
The application of electroanalytical methods to determine affinity series of metal cations for functional biosorbent groups
2018
Abstract The affinity of the selected heavy metal cations: Mn 2 + , Ni 2 + , Cu 2 + , Zn 2 + , Cd 2 + , Pb 2 + and Na + , K + , Mg 2 + , Ca 2 + was determined for the functional groups located on the surface of leached barley middlings, so called Brewer's spent grain (BSG) – a by-product of the brewing industry. A simple method for determining the affinity series, with the use of a conductivity meter and a pH-meter, was described. It was demonstrated that the affinity of cations for the functional groups located on the surface of the BSG increases in the series: Na + + 2 + 2 + ≈ Zn 2 + 2 + ≈ Ca 2 + 2 + 2 + 2 + , and the series was determined by comparing concentrations expressed in gram e…
Comments on "Dental lessons from past to present: Ultrastructure and composition of teeth from plesiosaurs, dinosaurs, extinct and recent sharks" by …
2016
The paper mentioned in the title suggests that several groups of extinct vertebrates used fluoroapatite as a tooth mineral in dentine and enamel when alive; its authors posit that this tooth mineralization drastically changed in all these lineages at some point during their evolution, leading to the use of hydroxyapatite as an alternative primary tooth mineral, because of hitherto unconsidered environmental changes. These conclusions are based on their finding high fluoride levels (i.e. fluoroapatite) in the dentine of fossilised shark teeth as well as in both the dentine and enamel of plesiosaurs, mosasaurs, and dinosaurs, which is in sharp contrast to recent teeth (which contain almost no…