Search results for "Medium"

Metal-Oxide-Free Methylammonium Lead Iodide Perovskite-Based Solar Cells: the Influence of Organic Charge Transport Layers

2014

Metal-oxide-free methylammonium lead iodide perovskite-based solar cells are prepared using a dual-source thermal evaporation method. This method leads to high quality reproducible films with large crystal domain sizes allowing for an in depth study of the effect of perovskite film thickness and the nature of the electron and hole blocking layers on the device performance. The power conversion efficiency increases from 4.7% for a device with only an organic electron blocking layer to almost 15% when an organic hole blocking layer is also employed. In addition to the in depth study on small area cells, larger area cells (approx. 1 cm(-2)) are prepared and exhibit efficiencies in excess of 10…

2019

Abstract The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability and thermal degradation kinetics of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites filled with small amounts of MCM-41. The PMMA/MCM-41 composites were prepared through in situ polymerisation and melt mixing methods, with MCM-41 loadings of 0.1, 0.3, and 0.5 wt.%. The presence of MCM-41 increased the thermal stability of PMMA/MCM-41 composites prepared by melt mixing, but in the case of the in situ polymerised samples, the MCM-41 accelerate…

Epoxy resins as a matrix material in advanced fiber-reinforced polymer (FRP) composites

2013

Abstract: This chapter discusses the epoxy resins which, thanks to their good and versatile properties, can be considered nowadays the most important class of thermosetting polymers. In particular the chapter first reviews both the epoxy resins commonly available on the market, including a new class of bio-derived epoxy resins, and the most-used curing agents. it then describes the principal characteristics of the epoxy resins and how it is possible to enhance them by adding several fillers to the epoxy system. Finally, the chapter analyzes the main engineering fields in which epoxy resins find application today and their possible future utilization.

Distribution of molecularly imprinted polymer layers on macroporous silica gel particles by STEM and EDX

2005

Abstract Using transmission electron microscopy (TEM) in parallel and scanning mode (STEM) combined with energy dispersive X-ray spectroscopy (EDX) the distribution of molecularly imprinted polymer layers covalently grafted on the inner and outer surface of macroporous silica gel particles was observed. The grafting was achieved using a special initiator system ( iniferter ) and applied on a well known model system producing molecularly imprinted layers with l -phenyl alanine analide ( l -PA) as template. By staining the sample with RuO 4 before its embedment in epoxy resin and cutting ultra thin slices it was possible to identify the stained grafted polymer on the silica matrix by EDX. Bas…

Nanowear on Polymer Films of Different Architecture

2007

In this paper, we describe atomic force microscope (AFM) friction experiments on different polymers. The aim was to analyze the influence of the physical architecture of the polymer on the degree and mode of wear and on the wear mode. Experiments were carried out with (1) linear polystyrene (PS) and cycloolefinic copolymers of ethylene and norbornene, which are stabilized by entanglements, (2) mechanically stretched PS, (3) polyisoprene-b-polystyrene diblock copolymers, with varying composition, (4) brush polymers consisting of a poly(methyl methacrylate) (PMMA) backbone and PS side chains, (5) PMMA and PS brushes grafted from a silicon wafer, (6) plasma-polymerized PS, and (7) chemically c…

Hydrothermal ageing of radiation cured epoxy resin-polyether sulfone blends as matrices for structural composites

2010

Abstract The hydrothermal ageing of epoxy–thermoplastic blends, used as matrices for carbon fibre composites, cured by electron beam, has been studied. Two different thermoplastic percentages have been adopted. A suitable choice of both curing process and formulation parameters allows to carry out irradiation at mild temperature with several advantages, coming from a “non thermal” process, for both the final properties of the materials and the environment. Nevertheless the occurring of vitrification phenomena needs the use of a short thermal treatment after irradiation on the already solid materials, in order to complete the cure reactions. Radiation cured epoxy based matrices have been sub…

Electrospun rubber/thermoplastic hybrid nanofibers for localized toughening effects in epoxy resins

2020

Synthetic rubber/thermoplastic blends were electrospun from their solutions. The rubber was a solid acrylonitrile/butadiene/acrylic acid copolymer and the thermoplastic was polyacrylonitrile. The aims of this study were to identify suitable systems and processing conditions for obtaining rubber-based electrospun nanofibers, to investigate the ability of an epoxy resin system to impregnate and swell selected hybrid rubber/thermoplastic mats, and to assess the impact of the nanofibers on the resin morphology and curing behavior. In particular, electrospinning trials were carried out varying the composition of the feed solution and process parameters, such as the applied voltage, the flow rate…

Diffusional enhancement of holograms: phenanthrenequinone in polycarbonate

2002

As a further development of the manufacture of holographic gratings by the diffusion of phenanthrenequinone in polymer glass, the traditionally employed poly(methyl methacrylate) is replaced by poly(bisphenol-A-carbonate). The post-exposure growth and decay of the gratings in the two materials are compared at different spatial periods and temperatures. The medium with polycarbonate demonstrates a fortunate combination of significantly improved stability of the gratings and their faster development. Our results indicate that the polycarbonate materials promise to be suitable media for holographic optical elements and data storage.

Carbon fibre composite materials produced by gamma radiation induced curing of epoxy resins

2008

It is well known that ionizing radiation can initiate polymerization of suitable monomers for many applications. In this work an epoxy dlfunctional monomer has been used as matrix of a carbon fibre composite in order to produce materials through gamma radiation, for aerospace and advanced automotive applications. Radiation curing has been performed at different absorbed doses and, as comparison, also thermal curing of the same monomer formulations has been done. Furthermore some Irradiated samples have been also subjected to a post Irradiation thermal curing in order to complete the polymerization reactions. The properties of the cured materials have been studied by moisture absorption isot…

MODIFICATION OF HUMIC SUBSTANCES FOR DEVELOPMENT OF MATERIALS FOR ENVIRONMENTAL TECHNOLOGIES

2019

Humic substances are high molecular weight refractory polycationites formed during decay of living organic matter and through biosynthesis of low molecular weight organic substances (metabolites or decay products of living organisms). Presence of many functional groups in the structure of humic substances determines their ability to interact with metal ions forming stable complexes and influencing metal ion speciation in the environment and mobility, behaviour and speciation forms in the environment. Presently humic substances are a product of industrial scale and quantities in amounts of hundreds of tons are produced. The aim of this study is to analyse derivatization possibilities of humi…