Search results for "Metallurgy"

Microstructural corrosion of aluminium alloys: a predictive finite element model based on corrosion-mimicking experiments

2013

The purpose of this study is to implement the basis of a finite element model (FEM) based on the resolution of the Nernst–Planck equation in order to progress in the predictive simulation of microstructural corrosion on aluminium alloys. Certain constituent intermetallic particles at the surface of aluminium alloys are considered as preferential sites for the initiation of structural corrosion resulting in localised trenching around the particles and the surrounding Al matrix. In this work, a modified scanning electrochemical microscope (SECM) experiment was used to induce such phenomena via a local alkalinization on 200 nm thick aluminium coatings, promoting their local dissolution in an a…

Microstructural and magnetic characterization of fly ash from Kolaghat Thermal Power Plant in West Bengal, India

2011

Abstract This paper reports on the physical nature of the fly ash sample of the Kolaghat Thermal Power Plant, India with an emphasis on its ultrafine nature. This paper also deals with the measurement of the magnetic properties of the fine particles of the fly ash sample. Particle sizes of this fly ash sample estimated from the SEM images lie within 0.16–5.50 μm, and the EDX spectral analysis indicates the presence of O, Al, Si, C, Fe, Mg, Na, K and Ti in this sample. From the XRD study, it is found that physical nature of conglomeration in the fly ash is crystalline and the major components are mullite (Al 6 Si 2 O 13 ) and quartz (SiO 2 ). Additionally, the presence of hematite, microclin…

Effect of surface microcracks on pitting susceptibility of manganese sulfide containing stainless steels

2007

Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activate…

2004

The preparation of highly dense bulk materials with a grain size in the range of a few to a few hundreds nanometers is currently the objective of numerous studies. In our research we have achieved a measure of success in this regard by using the methods of mechanically-activated, field-activated, pressure-assisted synthesis, MAFAPAS, which has been patented, and mechanically-activated spark plasma sintering, MASPS. Both methods, which consist of the combination of a mechanical activation step followed by a consolidation step under the simultaneous influence of an electric field and mechanical pressure, have led to the formation of dense nanostructured ceramics, intermetallics, and composite…

On the influence of tool path in friction stir spot welding of aluminum alloys

2008

Abstract Friction stir spot welding (FSSW) has been proposed as an effective technology to spot weld the so-called “difficult to be welded” metal alloys. In the paper, a variation of the FSSW process has been considered. A tool path is given after the sinking phase nearby the initial penetration site; in this way a larger welding spot is obtained and more material is involved in the bonding process. The process mechanics of such modified FSSW process is highlighted and the joint strength undergoing tensile tests is considered at the varying both of the assigned tool path and of a few process parameters. Macro- and micro-analyses are made in order to analyze the local material microstructure…

On microstructural phenomena occurring in friction stir welding of aluminium alloys

2006

Abstract The results of experimental activity on friction stir welding (FSW) of aluminum alloys are reported. Butt joints of two different materials, namely AA2024-T4 and AA7075-T6, were investigated from a metallurgical point of view. Grain dimensions and insoluble particle densities were investigated both in the parent materials and in the joints. Furthermore, the effect of post-welding heat treatments on the joint strength was studied.

Grain-boundary modelling of hydrogen assisted intergranular stress corrosion cracking

2018

Abstract A novel hybrid strategy for modelling intergranular hydrogen embrittlement in polycrystalline microstructures is proposed. The technique is based on a grain-boundary integral representation of the polycrystalline micro-mechanics, numerically solved by the boundary element method, coupled with an explicit finite element model of the intergranular hydrogen diffusion. The intergranular interaction between contiguous grains in the aggregate is modelled through extrinsic cohesive-frictional traction-separation laws, whose parameters depend on the concentration of intergranular hydrogen, which diffuses over the interface according to the Fick’s second law, inducing the weakening of the i…

Nanostructured anode material for Li-ion batteries

2010

The present paper focuses on a nanostructured SnCo alloy electrochemically prepared by template method in view of its use as anode material alternative to graphite in lithium-ion batteries. The fabrication of SnCo nanowire arrays was carried out by potentiostatic co-deposition of the two metals by using nanostructured anodic alumina membranes as template. Electrochemical tests on lithiation-delithiation of these SnCo electrodes in conventional organic electrolyte (EC:DMC LiPF6) at 30°C showed that their specific capacity was stable for about the first 12 cycles at a value near to the theoretical one for Li22Sn5 and, hence, progressively decayed.

Effect of microstructure and chemical composition on localized corrosion resistance of a AISI 304L stainless steel after nanopulsed-laser surface mel…

2015

Abstract Changes induced in the surface properties of AISI 304L stainless steel when it is treated with a nanopulsed ytterbium-doped fiber laser were investigated to determine the microscale distribution of its physico-chemical properties. A Gaussian energy distribution was created with a radius of 71 μm (1/e2) at the focal point. Local investigations were carried out using transmission electron microscopy to consider the effect of overlapping individual laser impacts. The results obtained reveal that laser surface melting leads to changes in the crystallographic structure of the steel through the formation of a δ-ferritic phase. It also results in the creation of an oxide layer that increa…

Corrosion Behaviour of Ti6Al4V and TiMo10Zr4 Alloys in the Ringer’s Solution: Effect of pH and Plastic Strain

2015

The corrosion behaviour of titanium alloys is not well understood – especially the role of the microstructure and plastic strain. In this paper, the influence of the microstructure and plastic strain on the corrosion resistance of TiMo10Zr4 and Ti6Al4V alloys was studied in the Ringer’s solution at 37 °C. Measurements were performed for different pH values and in aerated and de-aerated solutions using potentiodynamic polarization techniques. Results obtained on the two alloys were compared. It was shown that in the absence of plastic strain TiMo10Zr4 shows better corrosion resistance than Ti6Al4V (especially for pH = 8). By contrast, the current density in the passive range measured after 8…