Search results for "Metals"
showing 10 items of 2013 documents
A physical-based constitutive model for surface integrity prediction in machining of OFHC copper
2017
International audience; Due to the rising interest in predicting machined surface integrity and sustainability, various models for metal cutting simulation have been developed. However, their accuracy depends deeply on the physical description of the machining process. This study aims to develop an orthogonal cutting model for surface integrity prediction, which includes a physical-based constitutive model of Oxygen Free High Conductivity (OFHC) copper. This constitutive model incorporates the effects of the state of stress and microstructure on the work material behavior, as well as a dislocation density-based model for surface integrity prediction. The coefficients of the constitutive mod…
Terpyridine-based metallopolymer thin films as active layer in ammonia sensor device
2016
International audience; A metal-containing polymer has been prepared by electropolymerization of an homoleptic Ru(II)-terpyridine complex bearing pyrrole heterocycles. The polymer is obtained as a thinfilm at the surface ofelectrodes, and has been characterized by electrochemical measurements, XPS and microscopy. It hasbeen shown that this polymer acts as an active gas sensitive layer since it enables the detection of anammonia gasflow through layer’s resistivity measurements.
Dynamics of copper and zinc sedimentation in a lagooning system receiving landfill leachate.
2013
9 pages; International audience; This study characterises the sediment dredged from a lagooning system composed of a settling pond and three lagoons that receive leachates from a municipal solid waste (MSW) landfill in France. Organic carbon, carbonate, iron oxyhydroxides, copper (Cu) and zinc (Zn) concentrations were measured in the sediment collected from upstream to downstream in the lagooning system. In order to complete our investigation of sedimentation mechanisms, leachates were sampled in both dry (spring) and wet (winter) seasonal conditions. Precipitation of calcite and amorphous Fe-oxyhydroxides and sedimentation of organic matter occurred in the settling pond. Since different di…
Gas sensors arrays (electronic noses) : a study about the speed/accuracy ratio
2000
Abstract New Fingerprint Mass Spectra (FMS) systems claim for a higher precision, a reduced analysis time, and a lower drift, compared with Gas Sensors Arrays ‘Electronic Noses’. We demonstrated in this study that metal oxide gas sensors may have highly improved performances for both accuracy and run time, when used in optimum conditions. The different noise components were quantified referring to popular words (equivalent of ethanol concentration) using the transfer function of the sensor. It was pointed out that sample surrounding greatly affects the noise level, and that the signal-to-noise ratio may be dramatically increased, reducing the distortion generally assessed between sensor and…
Electronic noses : specify or disappear
2000
Abstract When the quality control is achieved by using GC or GC/MS, the apparatus must comply with the applicable norms, but what about “electronic noses”? End users demand for formal specifications for selectivity, sensitivity, repeatability and sample throughput. The behavioural modelling of electronic olfactometers may provide specifications for these required parameters. This will allow both the measure itself, and evaluate the influence of the experimental errors on the sample classification. Users may expect to find a methodology allowing the performances of systems to be checked before any final decision and during routine use. We have demonstrated that the system sensitivity and log…
Combustion wave structure during the MoSi2 synthesis by Mechanically-Activated Self-propagating High-temperature Synthesis (MASHS): In situ time-reso…
2006
Abstract In situ synchrotron time-resolved X-ray diffraction experiments coupled with an infrared imaging camera have been used to reveal the combustion wave structure during the production of MoSi2 by Mechanically Activated Self-propagating High-temperature Synthesis (MASHS). The fast combustion front exhibits a form described as an ‘equilibrium structure’ where the chemical reaction is the sole major driving force. In the MASHS process, oxide-free interfaces between Mo and Si nanocrystallites enhance the reaction Mo+2Si→MoSi2. Exhaustive time-resolved investigations show a possible solid-state process in the first second of the reaction within the combustion front. If preheating is added,…
Influence of interfering gases on a carbon monoxide differential sensor based on SAW devices functionalized with cobalt and copper corroles
2021
International audience; <!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:HyphenationZone>21</w:HyphenationZone> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:DoNotPromoteQF/> <w:LidThemeOther>FR</w:LidThemeOther> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKe…
Immobilization of single-stranded DNA fragments to solid surfaces and their repeatable specific hybridization : covalent binding or adsorption ?
2004
Abstract The different steps of the immobilization process of single-stranded DNA (ssDNA) on surfaces by means of chemical grafting have been investigated using systematic measurements of grafting and hybridization densities by means of radioactive labelling. The immobilization by chemical grafting to a dense monomolecular layer of N-hydroxysuccinimidyl ester reactive functions attached to silica plates was performed from a dilute solution of amino-terminated oligonucleotides (10 μmol/l). The slow evaporation of the solvent allowed to increase the DNA grafting density by a factor of 10. A precise control of the rinsing process that followed the immobilization reaction allowed the discrimina…
Ash in composting of source-separated catering waste.
2004
Our earlier experiments in small composters (220 l) indicated the favourable effect of ash from co-incineration of sorted dry waste on the composting of catering waste. The aim of this new study was to clarify further, at a scale of 10 m3, the feasibility of using similar ash as an additive in composting.Source-separated catering waste was mixed with bulking agent (peat and wood chips) and fuel ash from a small (4 MW) district heating power plant. Three compost mixes (CM) were obtained: CM I with 0%, CM II with 10% and CM III with 20 wt.% of fuel ash. These three different mixes were composted in a 10-m3 drum composter as three parallel experiments for 2 weeks each, from January to April 20…
Pull-off adhesion of hybrid glass-steel adhesive joints in salt fog environment
2016
The aim of this paper was to evaluate the durability behaviour of glass/steel adhesive joints exposed to salt fog environmental conditions for ten weeks, according to ASTM B117 standard. To this scope, pull-off mechanical tests were carried out in order to evaluate the performances evolution and damage phenomena of the adhesive joints during the ageing exposition. Two different types of adhesives were compared (i.e. epoxy and polyurethane ones). Moreover, the effects of the glass surface condition and the presence of a basalt mat layer within the adhesive thickness were evaluated. The mechanical performances were related with the occurred failure mechanisms. Epoxy-based joints showed higher…