Search results for "Metals"
showing 10 items of 2013 documents
Visible photothermal deflection spectroscopy using microcantilevers
2012
International audience; Photothermal deflection spectroscopy based on bi-material cantilevers combines the sensitivity of miniature sensors and the selectivity of optical spectroscopy. In this paper, we report on the photothermal response of the microcantilevers functionalized with nanometer thin organic films in the visible region. Unlike responses in the infrared regime, in the optical region, light absorption by all the cantilever constituents must be considered for extraction of the physical parameters of the organic layer. A model of photothermal deflection for the optical region has been developed for two absorbing layers consisting of a thick metal (>200 nm) and a thin organic film. …
Activation process of reversible Pd thin film hydrogen sensors
2013
Abstract Microcantilever-based thin film palladium hydrogen sensors have high selectivity and sensitivity. Reproducibility and accuracy of the sensor performance depend on the activation process of the polycrystalline palladium film deposited on the cantilever. When the hydrogen is in solid solution ( α -phase), the cantilever bending is mostly governed by the residual film stress induced by the swelling at the grain boundaries in the film. When the palladium hydride ( β -phase) starts to be formed, the cantilever undergoes a large deflection due to hydrogen absorption-induced film swelling (10% change in volume). Differences in the phase diagrams of the palladium hydride for two film thick…
Effect of alloying elements on the electronic properties of thin passive films formed on carbon steel, ferritic and austenitic stainless steels in a …
2014
The influence of alloying elements on the electrochemical and semiconducting properties of thin passive films formed on several steels (carbon steel, ferritic and austenitic stainless steels) has been studied in a highly concentrated lithium bromide (LiBr) solution at 25 °C, by means of potentiodynamic tests and Mott Schottky analysis. The addition of Cr to carbon steel promoted the formation of a p-type semiconducting region in the passive film. A high Ni contentmodified the electronic behaviour of highly alloyed austenitic stainless steels.Mo did notmodify the electronic structure of the passive films, but reduced the concentration of defects.
Comparison of the friction and wear properties of titanium and oxidised titanium in dry sliding against sintered high speed steel HS18-0-1 and agains…
2005
Abstract The paper presents the results of conformal pin-on-disc tribological tests concerning the hard oxidised zone, α-Ti(O), created at the surface of a titanium specimens sliding against the sintered and hardened up to 850 HV30, Grade T1 high speed steel (HS18-0-1) counterspecimens. Comparison with the results obtained for the tests performed against hardened up to 620 HV30 C45 carbon steel counterspecimens has been done. Testing was carried out at room temperature and at unlubricated conditions. After tests the structures and compositions of the worn surfaces and wear debris were a subject of LOM, SEM observations and X-ray microanalyses. In comparison with the baseline—the Ti/T1 HSS c…
The role of coatings in controlling the cutting process when turning with coated indexable inserts
1998
Abstract This paper is concerned with the variations in the specific cutting pressure and the tool–chip interface temperature that occur when machining a medium carbon steel and an austenitic stainless steel with TiC-, TiC/TiN- and TiC/Al2O3/TiN- coated inserts. Extensive experimental studies involving the cutting force and the interface temperature were performed. A standard thermocouple embedded in the workpiece was used to determine the cutting temperature. Two new parameters were introduced in order to compare both the mechanical and thermal loadings of the tool–chip contact for coated flat-faced and grooved inserts. Some optimal coating structures for high speed machining of these stee…
Friction and wear properties of titanium and oxidised titanium in dry sliding against hardened C45 steel
2004
Abstract The aim of the paper is to present the results of conformal pin-on-disc tribological tests concerning the hard oxidised zone created in superficial layer of a titanium specimen sliding against the hardened to a hardness of 690 HV carbon C45 steel counterspecimen. Tribological testing was carried out at room temperature and at unlubricated conditions. After tests the structures and chemical compositions of the wear debris and worn surfaces were a subject of SEM and X-ray investigations. In comparison with the baseline the technical quality titanium/C45 steel couple, the wear and lifetime performance of the oxidised titanium/steel C45couple was markedly superior. Dominant wear debris…
CROSSLINKED HYALURONAN WITH A PROTEIN-LIKE POLYMER: NOVEL BIORESORBABLE FILMS FOR BIOMEDICAL APPLICATIONS
2007
In this work, novel hydrogel films based on hyaluronan (HA) chemically crosslinked with the alpha,beta-poly(N-2-hydroxyethyl) (2-aminoethylcarbamate)-D,L-aspartamide (PHEA-EDA) were produced by solution casting method. The goal was to exploit both the biological key role of HA in tissue repair and regeneration, and the versatility of a synthetic protein-like polymer as the PHEA-EDA, in order to obtain biomaterials with physicochemical and biological properties suitable for a clinical use. By varying the molar ratio between the PHEA-EDA amino groups and HA carboxyl groups, three different films were obtained and characterized. Particularly FTIR, swelling, hydrolysis, and enzymatic degradatio…
Fibrin-chitosan composite substrate for in vitro culture of chondrocytes
2013
The aim of this study was to develop a biocompatible monolayer substrate based on fibrin and chitosan for in vitro culture of chondrocytes. Fibrin-chitosan composite substrates combined the proved cell adhesion properties of fibrin with the hydrophilicity and poor adhesion capacity of chitosan. Chitosan microspheres were produced by coacervation method, agglomerated within a fibrin network and subsequently crosslinked with genipin. The composite substrate was stable for 28 days of culture due to the high crosslinking density. Human chondrocytes cultured on the composite substrate were viable during the culture period. At the end of culture time (28 days) the composite substrate showed low c…
Linear assembly of lead bromide-based nanoparticles inside lead(ii) polymers prepared by mixing the precursors of both the nanoparticle and the polym…
2019
Mixing precursors of lead(ii) polymers with those of lead bromide-based nanoparticles (CH3NH3PbBr3 perovskites or PbBr2), at room temperature and in the presence of cyclohexanemethylammonium bromide, generated colloidal nanocomposites which, when deposited on a hydrophobic surface led to long, one-dimensional, ordered and well-defined architectures. ispartof: CHEMICAL COMMUNICATIONS vol:55 issue:20 pages:2968-2971 ispartof: location:England status: published
Synthesis of nanostructured amorphous carbon-copper composite films by plasma-enhanced chemical vapour deposition
2016
Abstract Nanostructured amorphous carbon-copper composite films were formed by plasma-enhanced chemical vapour deposition. The formation was done on copper-silicon substrates at 25 °C, 300 °C, 520 °C, and 700 °C temperatures using an acetylene gas at 40–70 Pa pressure. The heating of the Cu Si substrate induced formation of Cu nanospheres with 50–500 nm size depending on the substrate temperature. The microstructure and composition of nanostructured carbon-copper composite films were investigated. The SEM views showed formation of amorphous carbon films with the randomly distributed nanostructures. The oxygen concentration in the composite films decreased with the increased heating temperat…