Search results for "Methyl methacrylate"
showing 10 items of 162 documents
Ce:YAG nanoparticles embedded in a PMMA matrix: preparation and characterization
2010
A Ce:YAG-poly(methyl methacrylate) composite was prepared using in situ polymerization by embedding the Ce:YAG nanopowder in a blend of methyl methacrylate (MMA) and 2-methacrylic acid (MAA) monomers and activating the photopolymerization using a radical initiator. The obtained nanocomposite was yellow and transparent. Its characterization was performed using transmission electron microscopy, small angle X-ray scattering, (13)C cross-polarization magic-angle spinning nuclear magnetic resonance, and photoluminescence spectroscopy. Results showed that Ce:YAG nanoparticles are well dispersed in the polymeric matrix whose structure is organized in a lamellar shape. The luminescence properties o…
Lithography exposure characteristics of poly(methyl methacrylate) (PMMA) for carbon, helium and hydrogen ions
2012
Abstract Poly(methyl methacrylate) is a common polymer used as a lithographic resist for all forms of particle (photon, ion and electron) beam writing. Faithful lithographic reproduction requires that the exposure dose, Θ, lies in the window Θ 0 ⩽ Θ Θ × 0 , where Θ 0 and Θ × 0 represent the clearing and cross-linking onset doses, respectively. In this work we have used the programmable proximity aperture ion beam lithography systems in Chiang Mai and Jyvaskyla to determine the exposure characteristics in terms of fluence for 2 MeV protons, 3 MeV 4 He 2 + and 6 MeV 12 C 3 + ions, respectively. After exposure the samples were developed in 7:3 by volume propan-2-ol:de-ionised water mixture. At…
Polymer/Perovskite Amplifying Waveguides for Active Hybrid Silicon Photonics
2015
The emission properties of hybrid halide perovskites are exploited to implement a stable and very low power operation waveguide optical amplifier integrated in a silicon platform. By optimizing its design with a poly(methyl methacrylate) (PMMA) encapsulation, this novel photonic device presents a net gain of around 10 dB cm−1 and 3–4 nm linewidth with an energy threshold as low as 2 nJ pulse−1 and exhibiting no degradation after one year. This work was supported by Generalitat Valenciana (Project No. ISIC/2012/008), the Universitat Jaume I (Project No. 12I361.01/1), Spanish MINECO (Projects Nos. MAT2013-47192-C3-1-R and TEC2014-53727-C2-1-R) and EU-NAVOLCHI (Project No. 288869).
Refractive micro-optical elements for surface plasmons: from classical to gradient index optics.
2010
Controlling the propagation of surface plasmons along a metal-dielectric interface is a key feature for the development of surface plasmon based circuits. We have designed various two-dimensional refractive dielectric optical elements for surface plasmons (SP) and characterized their capacity to route SP, using near- or far-field techniques. We first present basic devices analogous to usual optical components and the associated challenges for SP optics. We then use a metamaterial approach to locally vary the refractive index and fabricate gradient index structures for SP circuitry.
Comparison of the Ultraviolet Light Filtering across Different Intraocular Lenses.
2018
SIGNIFICANCE We have analyzed the ultraviolet transmittance of some commercial intraocular lenses (IOLs). The results show differences of wavelength cutoff among them. PURPOSE The purpose of this study was to measure and compare the ultraviolet light transmittance of different IOLs made out of acrylic hydrophobic, hydrophilic, and hydrophilic with hydrophobic surface materials from different manufacturers. METHODS The spectral transmission curves of eight monofocal IOLs with the same dioptric power of +20.0 diopters were measured using a PerkinElmer Lambda 35 ultraviolet/visible spectrometer. Two IOLs of each type were tested three times. The ultraviolet cutoff wavelength at 10% transmissio…
Effect of Lithium Perchlorate on the Kinetics of the Anionic Polymerization of Methyl Methacrylate in Tetrahydrofuran
1999
The kinetics of the anionic polymerization of methyl methacrylate in the presence of lithium perchlorate (LiClO 4 ) are investigated in THF using 1,1-diphenylhexyllithium as initiator in a flow-tube reactor between -30 and 0 °C. The rate constants of propagation determined in the presence of LiClO 4 are lower than those obtained in the absence of the salt, similar to the effect observed for LiCl. For propagation, the reaction order with respect to active center concentration is found to be 0.5 in both cases, which indicates that LiClO 4 does not effectively perturb the aggregation of the enolate ion pair. The formation of various mixed aggregates is proposed. The polydispersity index of the…
Solubilisation of multi walled carbon nanotubes by alpha-pyrene functionalised PMMA and their liquid crystalline self-organisation.
2008
alpha-Pyrene functionalised poly(methyl methacrylate) (PMMA) chains were synthesised by RAFT polymerisation and found to be highly efficient to solubilise and disentangle multi walled carbon nanotubes that can now self-organise as liquid crystalline phases in PMMA and PEG 400 matrices.
Resource or waste? A perspective of plastics degradation in soil with a focus on end-of-life options.
2018
‘Capable-of-being-shaped’ synthetic compounds are prevailing today over horn, bone, leather, wood, stone, metal, glass, or ceramic in products that were previously left to natural materials. Plastic is, in fact, economical, simple, adaptable, and waterproof. Also, it is durable and resilient to natural degradation (although microbial species capable of degrading plastics do exist). In becoming a waste, plastic accumulation adversely affects ecosystems. The majority of plastic debris pollutes waters, accumulating in oceans. And, the behaviour and the quantity of plastic, which has become waste, are rather well documented in the water, in fact. This review collects existing information on pla…
Electronic Excitation Energy Transfer between Two Single Molecules Embedded in a Polymer Host
2007
Unidirectional electronic excitation energy transfer from a photoexcited donor chromophore to a ground state acceptor chromophore - both linked by a rigid bridge - has been investigated by low temperature high-resolution single molecule spectroscopy. Our approach allows for accurately accessing static disorder in the donor and acceptor electronic transitions and to calculate the spectral overlap for each couple. By plotting the experimentally determined transfer rates against the spectral overlap, we can distinguish and quantify Förster- and non-Förster-type contributions to the energy transfer.
Thermal stability of poly(styrene-b-methyl methacrylate) and poly(styrene-b-ethylene-co-1-butene-b-methyl methacrylate)
1993
The thermal stability of poly(styrene-b-methyl methacrylate) diblock copolymers (= P(S-b-MMA)) and poly(styrene-b-ethylene-co-1-butene-b-methyl methacrylate) triblock copolymers (=P(S-b-EB-b-MMA)) was investigated. Well-defined high molecular weight block copolymers with narrow molecular weight distribution (MWD) were molded at different temperatures in vacuum and the alteration of the MWD was sensitively monitored by gel permeation chromatography (GPC). Up to 240°C P(S-b-MMA) shows almost no broadening of the MWD. At higher temperatures low molecular weight polystyrene-rich portions are formed. The number average molecular weight (Mn) is strongly reduced. P(S-b-EB-b-MMA) triblock copolymer…