Search results for "Metre"
showing 10 items of 150 documents
Synthesis, characterization and magnetism of monodispersed water soluble palladium nanoparticles
2008
Water soluble, monodispersed Pd nanoparticles with a narrow particle size distribution have been successfully synthesized by controlled reduction of [PdCl4]2−. The resulting aqueous colloids are stable over extended periods of time and can be prepared at high nanoparticle loading (20 g/L of Pd) with no agglomeration. The size of the nanoparticles can be reduced from the nanometer (ca. 3.5 nm) to the sub-nanometer size range (ca. 0.9 nm). Detailed magnetic characterization indicated that the larger, 3.5 nm nanoparticles show ferromagnetic properties at room temperature, while the sub-nanometric ones lose this magnetic behavior.
Adhesion and Friction Forces between Spherical Micrometer-Sized Particles
1999
An experimental setup, based on the principles of atomic force microscopy (AFM), was used to measure directly the adhesion and rolling-friction forces between individual silica microspheres of radii between 0.5 and 2.5 \ensuremath{\mu}m. It showed that the linear dependence of the pull-off force on the particle radius is still valid for micron-sized particles. Rolling-friction forces between silica microspheres were measured for the first time by combining AFM methods and optical microscopy: They are $\ensuremath{\sim}100$ times lower than the corresponding adhesion forces.
Variable Thickness Porous Anodic Alumina/Metal Film Bilayers for Optimization of Plasmonic Scattering by Nanoholes on Mirror
2018
Continuously variable thickness porous anodic aluminum oxide (PAAO) films were obtained using electrochemical oxidation of bulk aluminum sheet while both electrodes were simultaneously withdrawn from the electrolyte solution. The thickness gradient was controlled by the withdrawal rate (1–10 mm/min range) and thickness variation demonstrated from below 50 nm to above 1 micrometer. The thickness increased linearly with the sample lateral coordinate, whereas the nanopore structure (diameter and interpore distance) remained unchanged. Effects of the initial pore growth and capillary forces are discussed. The presented method can be used for tuning optimal PAAO thickness for optical and other a…
Comparative Acoustic and Contact Studies of Elasticity of Ferroelectric LixNa1 - xTa0.1Nb0.9O3Solid Solutions at Nanometer Spatial Resolution
2009
Comparative acoustic and contact studies of elastic properties of the Li x Na 1−x Ta 0.1 Nb 0.9 O 3 (x = 0.015–0.135) ferroelectric solid solution ceramics are reported. A good agreement is obtained between the values of elastic modules determined by acoustic and contact methods at nano-scale spatial resolution.
Evidence for the verwey transition in highly nonstoichiometric nanometric fe-based ferrites
2001
The nanometric scale allows an investigation of the Verwey transition: the impact of varying degree of oxidation of Fe cations on this transition was studied by means of zero-field-cooled superconducting quantum interference device measurements in nanometric highly nonstoichiometric particles of pure and Ti-substituted magnetite synthesized using soft chemistry route. It is clearly shown that (i) there is a shift of the transition towards higher temperatures for nanometer scaled compounds and (ii) the amplitude, the temperature, and the order of the transition are only depending on the number of ${\mathrm{Fe}}^{2+}{/\mathrm{F}\mathrm{e}}^{3+}$ pairs in octahedral coordination.
Synthesis of Multifunctional Inorganic Materials
2018
Abstract Both, novel and older widely and routinely used methods of chemical synthesis fornew multifunctional inorganic (nano) materials with different sizes and morphologies are reviewed and summarized in this chapter. Illustrative examples of micro- and nanoparticle preparations are provided regarding different applications: renewable and sustainable energy harvesting, water splitting and hydrogen generation, fuel and solar cell devices, luminescent materials for white light–emitting diodes and clean environment. We give our perspective on the current status of the topic: methods of colloidal chemistry, coprecipitation, reverse-micelle technique, sol–gel, spray pyrolysis, microwave-assist…
Microactuators: Control of the Properties of Micrometer Sized Actuators from Liquid Crystalline Elastomers Prepared in a Microfluidic Setup (Adv. Fun…
2010
In this article new results on the preparation of monodisperse particles from a liquid crystalline elastomer in a microfluidic setup are presnted. For this, droplets from a liquid crystalline monomer are prepared in a microfluidic device and polymerized while they are flowing inside a microtube. The particles obtained by this method possess an internal orientation, which gives them actuating properties. When they are heated into the isotropic phase of the liquid crystalline material they show a reversible change in shape whereby they change their length in one direction by almost 100%. It is shown how the variation of experimental parameters during their synthesis impacts the properties of…
Exfoliation of Alpha-Germanium: A Covalent Diamond-Like Structure
2021
2D materials have opened a new field in materials science with outstanding scientific and technological impact. A largely explored route for the preparation of 2D materials is the exfoliation of layered crystals with weak forces between their layers. However, its application to covalent crystals remains elusive. Herein, a further step is taken by introducing the exfoliation of germanium, a narrow-bandgap semiconductor presenting a 3D diamond-like structure with strong covalent bonds. Pure α-germanium is exfoliated following a simple one-step procedure assisted by wet ball-milling, allowing gram-scale fabrication of high-quality layers with large lateral dimensions and nanometer thicknesses.…
Microfluidic synthesis of micrometer-sized photoresponsive actuators based on liquid crystalline elastomers
2016
The fabrication of photoresponsive micrometer-sized liquid crystalline elastomer (LCE) particles has been described in this article for the first time. The preparation of the LCE particles using a microfluidic device by a continuous “on the fly” technique allows their fast processing with an irradiation time of less than 2 seconds. In order to accelerate the polymerization and to make the preparation of samples with thicknesses of several hundred microns possible, we modified a NIR-photoinitiation system by adding a bleaching agent. In addition to the photoinitiator, a side-chain liquid crystalline monomer containing an azo-group and a LC-crosslinker were used in the polymerization mixture.…
Smart composite films of nanometric thickness based on copper-iodine coordination polymers. Toward sensors.
2018
One-pot reactions between CuI and methyl or methyl 2-amino-isonicotinate give rise to the formation of two coordination polymers (CPs) based on double zig-zag Cu2I2 chains. The presence of a NH2 group in the isonicotinate ligand produces different supramolecular interactions affecting the Cu-Cu distances and symmetry of the Cu2I2 chains. These structural variations significantly modulate their physical properties. Thus, both CPs are semiconductors and also show reversible thermo/mechanoluminescence. X-ray diffraction studies carried out under different temperature and pressure conditions in combination with theoretical calculations have been used to rationalize the multi-stimuli-responsive …