Search results for "Micro"

showing 10 items of 23412 documents

A comparative study on the compatibility of liquid lead–gold eutectic and liquid lead–bismuth eutectic with T91 and SS 316LN steels

2012

Abstract Liquid lead–gold eutectic (LGE) is considered as a potential target material for high power spallation sources. In the present work, the corrosion effects of LGE on T91 and SS 316LN steels have been investigated in comparison with that of liquid lead–bismuth eutectic (LBE) under the same testing conditions. Two tests were conducted at 400 °C for 1800 h and at 450 °C for 1300 h, in which specimens of the two steels were exposed to 1 m/s flowing LGE and LBE. Surface inspections showed that the specimens underwent a mixed corrosion mode of dissolution and oxidation. The results obtained from the SS 316LN specimens are very interesting. Firstly, EDX (electron energy dispersion X-ray sp…

010302 applied physicsNuclear and High Energy PhysicsMaterials scienceLead-bismuth eutecticMetallurgychemistry.chemical_element02 engineering and technology021001 nanoscience & nanotechnologyMicrostructure01 natural sciencesBismuthCorrosionNuclear Energy and Engineeringchemistry0103 physical sciencesGeneral Materials ScienceSpallationGrain boundary0210 nano-technologyDissolutionEutectic systemJournal of Nuclear Materials
researchProduct

Marginal and internal fit evaluation of conventional metal-ceramic versus zirconia CAD/CAM crowns

2019

Background The purpose of this in vivo study was to compare the marginal and internal gap widths of monolithic zirconia crowns fabricated by CAD/CAM technique and metal-ceramic crowns fabricated by conventional technique. Material and methods 10 participants needing a single restoration were selected. Zirconia crowns using CAD/CAM technology (Group A) (n=10) and metal-ceramic crowns (Group B) (n=10) using lost wax casting technique were fabricated for each selected tooth. The marginal and internal gaps of crowns were recorded using a replica technique with light body silicone material stabilized with a regular set putty. Each replica was sectioned buccolingually and mesiodistally and then e…

010302 applied physicsOrthodonticsProsthetic DentistryMaterials scienceResearchMonolithic zirconiaCAD02 engineering and technology:CIENCIAS MÉDICAS [UNESCO]021001 nanoscience & nanotechnology01 natural sciencesMetal ceramicPaired samplesUNESCO::CIENCIAS MÉDICAS0103 physical sciencesStereo microscopeCubic zirconia0210 nano-technologyGeneral DentistryConventional techniqueJournal of Clinical and Experimental Dentistry
researchProduct

Influence of Sr addition on structural, dielectric and Raman properties of Na0.5Bi0.5TiO3ceramics

2016

ABSTRACTLead free (Na0.5Bi0.5)1-xSrxTiO3 (x = 0, 0.01 and 0.02) ceramics were produced by a conventional solid-state sintering method. X-ray diffraction analysis shows that the obtained samples possess the perovskite structure with rhombohedral symmetry. The microstructure study shows a dense structure, in agreement with the relative density (above 97%). Dielectric analysis revealed the diffuse character of the electric permittivity anomalies and their shift to a lower temperature range after Sr doping of NBT. The Raman spectra are similar for all samples in agreement with the X-ray diffraction data. The possible origin of the observed effects was discussed.

010302 applied physicsPermittivityDiffractionMaterials scienceDopingAnalytical chemistrySintering02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure01 natural sciencesElectronic Optical and Magnetic Materialssymbols.namesakeControl and Systems Engineering0103 physical sciencesMaterials ChemistryCeramics and CompositessymbolsRelative densityElectrical and Electronic Engineering0210 nano-technologyRaman spectroscopyIntegrated Ferroelectrics
researchProduct

Microwave properties and structure of La–Ti–Si–B–O glass-ceramics for applications in GHz electronics

2017

Abstract A dielectric bulk glass-ceramic of the La 2 O 3 –TiO 2 –SiO 2 –B 2 O 3 system is developed which is able to fulfill the requirements for dielectric loading-based mobile communication technologies. It is shown that the given dielectric requirements can be fulfilled by glass-ceramic materials without being dependent on ceramic processing techniques. The material exhibited permittivity values of 20  ɛ r Qf τ f τ f material with a Qf value of 9500 GHz and ɛ r  = 21.4 could be achieved at a ceramming temperature T cer  = 870 °C. The material is aimed to provide an alternative to existing, commercially used sintered ceramic materials. Further focus is laid on the investigation of the dom…

010302 applied physicsPermittivityMaterials science02 engineering and technologyDielectricSintered ceramic021001 nanoscience & nanotechnologyMicrostructure01 natural sciencesvisual_art0103 physical sciencesMaterials ChemistryCeramics and Compositesvisual_art.visual_art_mediumDielectric lossCeramicElectronicsComposite material0210 nano-technologyMicrowaveJournal of the European Ceramic Society
researchProduct

Two-phase dielectric polar structures in 0.1NBT-0.6ST-0.3PT solid solutions

2018

Abstract In this work we address the peculiarities of the macroscopic responses in ternary 0.1Na0·5Bi0·5TiO3-0.6SrTiO3-0.3PbTiO3 (0.1NBT-0.6ST-0.3PT) solid solutions. These solid solutions exhibit a spontaneous first order relaxor to normal ferroelectric phase transition. The phase transition is accompanied by a broad dielectric relaxation which expands over 10 orders of magnitude in frequency just above the phase transition temperature. The temperature dependence of polarization shows that non-zero net polarization persists above the phase transition temperature. Below the phase transition temperature, it is not possible to describe the temperature dependence of polarization with a power l…

010302 applied physicsPhase transitionMaterials sciencePolymers and PlasticsCondensed matter physicsMetals and Alloys02 engineering and technologyDielectric021001 nanoscience & nanotechnologyPolarization (waves)01 natural sciencesFerroelectricityElectronic Optical and Magnetic MaterialsCondensed Matter::Materials SciencePiezoresponse force microscopyPhase (matter)0103 physical sciencesCeramics and CompositesRelaxation (physics)0210 nano-technologySolid solutionBauwissenschaften
researchProduct

Dielectric behaviour of BaTi1-xZrxO3ceramics obtained by means of a solid state and mechanochemical synthesis

2016

ABSTRACTIn this study the comparison of dielectric behaviour of BaTi1-xZrxO3 (BTZx) ceramic samples prepared by means of a solid state and mechanochemical synthesis was presented. A single phase of perovskite structure was identified in the samples at room temperature. No significant impurities were detected in an EDS spectrum and the samples had a good stoichiometric ratio. The morphology of the investigated samples was characterized by a scanning electron microscopy (SEM). The investigation of dielectric properties of the BTZx samples within the temperature range from 140 K to 600 K was performed by means of a dielectric spectroscopy method at the frequency ranging from 0.1 Hz to 10 MHz. …

010302 applied physicsPhase transitionMaterials scienceScanning electron microscopeAnalytical chemistry02 engineering and technologyDielectricAtmospheric temperature range021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsDielectric spectroscopyImpurityvisual_art0103 physical sciencesvisual_art.visual_art_mediumCeramic0210 nano-technologyStoichiometryFerroelectrics
researchProduct

Multimode time-dependent gyrotron equations for different time scales

2017

The work of H.K. was supported by the European Regional Development Funding of the Project No. 1.1.1.1/ 16/A/004.

010302 applied physicsPhysicsMulti-mode optical fiberTransit timeElectronCondensed Matter Physics01 natural sciences010305 fluids & plasmaslaw.inventionFormalism (philosophy of mathematics)AmplitudelawGyrotronQuantum electrodynamicsQuantum mechanics0103 physical sciences:NATURAL SCIENCES:Physics [Research Subject Categories]Microwave
researchProduct

Radiation emission at channeling of electrons in a strained layer undulator crystal

2013

Abstract Experiments have been performed at the Mainz Microtron MAMI to explore the radiation emission spectra from a crystalline undulator at electron beam energies of 270 and 855 MeV. The epitaxially grown graded composition strained layer Si 1 - x Ge x undulator had 4-period with a period length λ u = 9.9 μ m . Spectra taken at the beam energy of 270 MeV at channeling in the undulating (110) planes exhibit a broad excess yield around the theoretically expected photon energies of 0.069 MeV, as compared with a flat silicon reference crystal. Model calculations on the basis of synchrotron-like radiation emission from finite single arc elements, taking into account also coherence effects, su…

010302 applied physicsPhysicsNuclear and High Energy PhysicsPhotonSiliconchemistry.chemical_elementElectronUndulator01 natural sciencesSpectral lineCrystalchemistry0103 physical sciencesCathode rayPhysics::Accelerator PhysicsAtomic physicsNuclear Experiment010306 general physicsInstrumentationMicrotronNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Broadband microwave emission spectrum associated with kinetic instabilities in minimum-B ECR plasmas

2017

Plasmas of electron cyclotron resonance ion sources (ECRISs) are prone to kinetic instabilities due to the resonant heating mechanism resulting in anisotropic electron velocity distribution. Frequently observed periodic oscillations of extracted ion beam current in the case of high plasma heating power and/or strong magnetic field have been proven to be caused by cyclotrontype instabilities leading to a notable reduction and temporal variation of highly charged ion production. Thus, investigations of such instabilities and techniques for their suppression have become important topics in ECRIS research. The microwave emission caused by the instabilities contains information on the electron e…

010302 applied physicsPhysicsRange (particle radiation)microwave sourcesIon sourcesIon beamta114Highly charged ionPlasmaAstrophysics::Cosmology and Extragalactic Astrophysicsplasma instabilitiesmagnetic fieldsCondensed Matter PhysicsPlasma oscillationmagneettikentät01 natural sciences7. Clean energyElectron cyclotron resonanceIonPhysics::Plasma Physicsmicrowave spectra0103 physical sciencesAtomic physics010306 general physicsMicrowave
researchProduct

Time resolved measurements of hydrogen ion energy distributions in a pulsed 2.45 GHz microwave plasma

2017

A plasma diagnostic study of the Ion Energy Distribution Functions (IEDFs) of H+, H+2H2+, and H+3H3+ ions in a 2.45 GHz hydrogen plasma reactor called TIPS is presented. The measurements are conducted by using a Plasma Ion Mass Spectrometer with an energy sector and a quadrupole detector from HIDEN Analytical Limited in order to select an ion species and to measure its energy distribution. The reactor is operated in the pulsed mode at 100 Hz with a duty cycle of 10% (1 ms pulse width). The IEDFs of H+, H+2H2+, and H+3H3+ are obtained each 5 μs with 1 μs time resolution throughout the entire pulse. The temporal evolution of the plasma potential and ion temperature of H+ is derived from the d…

010302 applied physicsPhysicsRange (particle radiation)plasma sourcesta114plasma diagnosticsPlasmaCondensed Matter PhysicsMass spectrometry01 natural sciences7. Clean energyIon source010305 fluids & plasmasIonplasma dynamicsPhysics::Plasma Physics0103 physical sciencesThermal emittancePlasma diagnosticsionAtomic physicsMicrowaveplasma sheathsPhysics of Plasmas
researchProduct