Search results for "Microporous"
showing 10 items of 94 documents
A simple novel configuration for in-vial microporous membrane liquid–liquid extraction
2009
Abstract A novel arrangement for microporous membrane liquid–liquid extraction from the aqueous donor phase to the organic acceptor phase within a micro-vial, which is compatible with the chromatograph autosampler is presented. The device consisted of a stoppered glass micro-vial containing the organic solvent where the septum of the screw stopper was replaced by a sized piece of membrane which is hermetically assembled to the volumetric flask containing the aqueous donor solution. The placement of the membrane in alternative contact with the solutions was achieved by orbital agitation. As a preliminary study, 2-ethylhexyl 4-(dimethylamino)benzoate has been determined (limit of quantificati…
Determination of phenolic compounds in air by using cyclodextrin-silica hybrid microporous composite samplers
2015
An analytical method for the determination of phenolic compounds in air samples based on the use of cyclodextrin-silica hybrid microporous composite samplers is proposed. The method allows the determination of phenol, guaiacol, cresol isomers, eugenol, 4-ethylphenol and 4-ethylguaiacol in workplaces according to the Norm UNE-EN 1076:2009 for active sampling. Therefore, the proposed method offers an alternative for the assessment of the occupational exposure to phenol and cresol isomers. The detection limits of the proposed method are lower than those for the NIOSH Method 2546. Storage time of samples almost reaches 44 days. Recovery values for phenol, guaiacol, o-cresol, m-cresol, p-cresol,…
Simultaneous determination of third-generation synthetic cannabinoids in oral fluids using cyclodextrin-silica porous sorbents
2022
Abstract A microporous material made of cyclodextrin units covalently immobilized into a silica network has found an innovative bioanalytical application in the sample clean-up and simultaneous isolation of three synthetic cannabinoids (ADB-CHMICA, MMB-CHMICA, and MDMB-CHMCZCA) from human oral fluid through solid-phase extraction. The subsequent quantitation is carried out using liquid chromatography coupled to fluorescence detection. The optimized experimental procedure gives recoveries ranging from 76% to 96% in oral fluid samples spiked with the studied cannabinoids at the µg L-1 level. High selectivity is obtained through the extraction procedure due to the presence of cyclodextrin in t…
Facile fabrication of flower like self-assembled mesoporous hierarchical microarchitectures of In(OH)3 and In2O3: In(OH)3 micro flowers with electron…
2016
Abstract A template and capping-reagent free facile fabrication method for mesoporous hierarchical microarchitectures of flower-like In(OH) 3 particles under benign hydrothermal conditions is reported. Calcination of In(OH) 3 to In 2 O 3 with the retention of morphology is also described. Both In(OH) 3 and In 2 O 3 microstructures were analyzed with SEM, EDX, TEM and powder X-ray diffraction. The crystal sizes for In(OH) 3 and In 2 O 3 were calculated using the Scherrer equation. In In(OH) 3 the thin flakes at the periphery of micro flowers were electron beam sensitive. The mechanism of self-assembly process was analyzed as well.
New zeolite-like RUB-5 and its related hydrous layer silicate RUB-6 structurally characterized by electron microscopy.
2020
RUB-5 and its related hydrous layer silicate RUB-6 were synthesized in the 1990s, but so far their structures have remained unknown due to their low crystallinity and disorder. The combination of 3D electron diffraction, X-ray powder diffraction, high-resolution transmission electron microscopy, structural modelling and diffraction simulations has enabled a comprehensive description of these two nanomaterials, revealng a new framework topology and a unique silica polymorph.
Evaluation of the optimal activation parameters for almond shell bio-char production for capacitive deionization
2020
Abstract A study on a possible new biomass waste to be used as electrode material for capacitive deionization (CDI) processes was performed. Raw almond shells were pyrolyzed at 800, 900 and 1000 °C and then activated through CO2. Carbon activation is used to develop porosity inside the material, increasing the specific surface area and the adsorption performances. In this work, authors tried to correlate the effects of pyrolysis and activation temperature on the ion storage capacity. Results from the desalination tests indicated that the best performance in terms of ion adsorption was obtained when the bio-char was activated at the temperature of 900 °C. Brunauer-Emmet-Teller (BET) and Barr…
Design, characterization and comparison of materials based on β and γ cyclodextrin covalently connected to microporous silica for environmental analy…
2018
Abstract Determination of organic pollutants in environmental samples presents great difficulties due to the lack of sensitivity and selectivity in many of the existing analytical methods. In this work, the efficiency of materials based on silica structures containing bounded γ-cyclodextrin has been evaluated to determinate phenolic compounds and polycyclic aromatic hydrocarbons in air and water samples, respectively, in comparison with materials made of β-cyclodextrin. According to the results obtained for the material characterization, the new γ-cyclodextrin solid phase does not apparently present any porosity when used in air samples, but it has been shown to work efficiently for the pre…
Quantum chemistry calculations on the effect of electron confinement upon the frontier molecular orbitals of ethylene and benzene in sodalite. Implic…
1997
Abstract Quantum chemistry calculations using HF / STO-3G, CEP-41G, and 3-21G basis sets have been carried out in order to study the effect of the electron confinement of ethylene and benzene in the microporous environment existing in a sodalite cage. The electron confinement produces an increase of 1.06 and 1.31 eV at the 3-21G level in the energy of the HOMO of ethylene and benzene, respectively, when placed in the centre of the cavity with respect to the HOMO energy in the gas phase. There is an increase in the energy of the HOMO when the molecules approach the walls of the zeolite.
Macroscopic and Molecular Insights from CO Adsorption on NaY Zeolite: A Combined FTIR and Manometric Study
2012
International audience; This survey combines both quantitative and IR molecular descriptions and aims to provide new insights for the description of CO adsorption on NaY zeolite at 77 K. Quantitative measurements of the number of CO molecules trapped in the microporous super cage are compared to the corresponding IR spectra of CO as adsorbed species. We demonstrate that polycarbonyls formed during the completion of the accessible S-II Na+ coordinative vacancies result in the formation of mono-, di- and tricarbonyls but not consecutively. Quantitative analysis and measurements of the CO molecules that are adsorbed prove that polycarbonyls coexist with different proportions over the adsorptio…
Fine-tuning of the confined space in microporous metal–organic frameworks for efficient mercury removal
2017
Offsetting the impact of human activities on the biogeochemical cycle of mercury has become necessary for a sustainable planet. Herein, we report the development of a water-stable and eco-friendly metal–organic framework, which has the formula {Cu4II[(S,S)-methox]2}·5H2O (1), where methox is bis[(S)-methionine]oxalyl diamide. Its features include narrow functional channels decorated with thioalkyl chains, which are able to capture HgCl2 from aqueous media in an efficient, selective, and rapid manner. The conscious design effort in terms of size, shape, and reactivity of the channels results in extremely efficient immobilization of HgCl2 guest species in a very stable conformation, similar t…