Search results for "Microscope"
showing 10 items of 1412 documents
Tailoring the Structural, Optical, and Photoluminescence Properties of Porous Silicon/TiO2 Nanostructures
2015
The structural, optical, and photoluminescence properties of porous silicon (PSi)/titanium dioxide (TiO2) nanostructures were investigated. PSi structures consisting of macro- and mesoporous layers were fabricated by metal-assisted chemical etching, and then TiO2 was introduced inside the PSi matrix using the atomic layer deposition technique. We performed scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray spectroscopy, Raman spectroscopy, ellipsometry, and photoluminescence (PL) spectroscopy to characterize the prepared and annealed PSi/TiO2 nanostructures. TEM and Raman analyses revealed that TiO2 had a crystalline anatase stru…
Photoluminescence: A very sensitive tool to detect the presence of anatase in rutile phase electrospun TiO 2 nanofibers
2015
Abstract This paper reports on the synthesis and the characterization of titanium dioxide (TiO2) nanofibers prepared by electrospinning. The samples were annealed at various temperatures in air for 4 h. The as-spun and annealed TiO2/PVP composite nanofibers were characterized by scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy analysis (EDX), X-ray diffraction (XRD), Raman spectroscopy and photoluminescence (PL). The results show that the heat treatment has an effect on the crystallization process. Even if the XRD data shows a complete anatase-to-rutile transition in the TiO2 nanofibers at 900 °C, photoluminescence reveals a small portion of anatase in rutile sample.…
Black carbon-doped TiO2 films: Synthesis, characterization and photocatalysis
2019
This research is funded by the European Social Fund according to the activity ‘Improvement of researchers’ qualification by implementing world-class R&D projects’ of Measure No. 09.3.3-LMT- K-712, project „Investigation of the application of TiO2 and ZnO for the visible light assisted photocatalytical disinfection of the biologically contaminated water“ (09.3.3-LMT-K-712-01-0175). The authors express gratitude for the S. Tuckute, M. Urbonavicius, G. Laukaitis and K. Bockute for their valuable input in current work. © 2019. This work is licensed under a CC BY-NC-ND 4.0 license.
Photocatalytic thin films of TiO2 formed by a sol-gel process using titanium tetraisopropoxide as the precursor
2008
Abstract Thin TiO 2 films were prepared with the dip-coating technique by using sols deriving from titanium tetraisopropoxide. TiO 2 films were formed on glass substrates previously covered by a SiO 2 layer obtained from a tetraethylortosilicate sol. The films, after a thermal treatment at 673 K, mainly consisted of TiO 2 anatase. The samples were characterised by X-ray diffraction, UV–Vis spectroscopy, scanning electron microscopy and atomic force microscopy. The photoactivity of the various films was tested by using as probe reaction the photo-oxidation of 2-propanol in gas-solid regime. The photoreactivity results indicated that the TiO 2 films were efficient for degrading 2-propanol und…
Sol-gel derived anatase TiO2: morphology and photoactivity
1994
Abstract High-surface area TiO 2 (anatase) was prepared by the sol-gel method and characterized by various instrumental and analytical methods, including X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, porosimetry, specific surface area measurements, scanning electron microscopy, and titration of surface hydroxyl groups. The specimen was tested for photodegradation of phenol and nitrophenols carried out in aqueous suspension at pH = 3; photoactivity was compared with that of commercially available anatase TiO 2 . Results are discussed in terms of porosity, surface area, and availability and population of surface OH groups, consequent upon the particular method used for…
Preparation and photoactivity of electrophoretic TiO2coating film
2012
TiO2 thin films have been obtained by a sol-electrophoretic deposition method on metallic Ti and Pt substrates. X-ray diffraction, Raman spectroscopy and scanning electron microscopy were used to investigate the structure and morphology of plated materials. Annealed TiO2 films mainly are formed in anatase structure with different morphology depending on substrate material. Light induced potential measurements indicate that the morphology substantially have an impact on photoactivity of TiO2 thin films.
Phase formation in mixed TiO2-ZrO2 oxides prepared by sol-gel method
2011
Pure titania, zirconia, and mixed oxides (3—37 mol.% of ZrO2) are prepared using the sol-gel method and calcined at different temperatures. The calcined samples are characterized by Raman spectroscopy, X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption porosimetry. Measurements reveal a thermal stability of the titania anatase phase that slightly increases in the presence of 3—13 mol.% of zirconia. Practically, the titania anatase-rutile phase transformation is hindered during the temperature increase above 700 C. The mixed oxide with 37 mol.% of ZrO2 treated at 550 C shows a new single amorphous phase with a surface area of the…
Lateral Fusion of Chemical Vapor Deposited N = 5 Armchair Graphene Nanoribbons
2017
Bottom-up synthesis of low-bandgap graphene nanoribbons with various widths is of great importance for their applications in electronic and optoelectronic devices. Here we demonstrate a synthesis of N = 5 armchair graphene nanoribbons (5-AGNRs) and their lateral fusion into wider AGNRs, by a chemical vapor deposition method. The efficient formation of 10- and 15- AGNRs is revealed by a combination of different spectroscopic methods, including Raman and UV−visnear-infrared spectroscopy as well as by scanning tunneling microscopy. The degree of fusion and thus the optical and electronic properties of the resulting GNRs can be controlled by the annealing temperature, providing GNR films with o…
High photodegradation and antibacterial activity of BN–Ag/TiO 2 composite nanofibers under visible light
2018
To develop material with good photocatalytic properties for organic compound degradation and bacterial removal, we produced Ag/TiO2 and BN–Ag/TiO2 composite nanofibers that included controlled amounts of boron nitride (BN) nanosheets and silver (Ag). After annealing at 500 °C under air, we used scanning electron microscopy, transmission electron microscopy, Brunauer–Emmet–Teller analysis, X-ray diffraction, energy-dispersive X-ray spectroscopy, Raman spectroscopy, UV-visible reflectance spectroscopy and room temperature photoluminescence to investigate the morphological, structural and optical properties of all samples. The photocatalytic tests using methylene blue under visible light, in r…
Small round blue cell sarcoma of bone mimicking atypical Ewing's sarcoma with neuroectodermal features. An analysis of five cases with immunohistoche…
1987
Ewing's sarcoma (ES) of bone may occasionally display rosette-like textures mimicking Homer-Wright ones, as seen in neuroectodermic neoplasms (neuroblastoma, peripheral neuroepithelioma). Of a group of 39 cases of ES, reviewed with electron microscopic study, the authors have isolated five atypical ES, which histologically also possessed neuroectodermic traces. These tumors were composed of small round blue cells with rosette-like figures and cytoplasmic glycogen. The immunohistochemical analysis showed positivity for neuron-specific enolase (NSE) as well as for HNK-1 (leu-7) monoclonal antibody. Electron microscopic examination confirmed the tumor cell as being of small round type, with a …