Search results for "Microscopy"
showing 10 items of 3390 documents
3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing
2020
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 …
TEM and Raman characterisation of diamond micro- and nanostructures in carbon spherules from upper soils
2008
Carbonaceous spherules of millimeter size diameter and found in the upper soils throughout Europe are investigated by TEM, including SAED, HRTEM and EELS, and Raman spectroscopy. The spherules consist primarily of carbon and have an open cell-like internal structure. Most of the carbon appears in an amorphous state, but different morphologies of nano- and microdiamond particles have also been discovered including flake shapes. The latter observation, together with the original findings of some of these spherules in crater-like structures in the landscape and including severely deformed rocks with some spherules being embedded in the fused crust of excavated rocks, points towards unique cond…
Formation of ZnO nanowires by anodization under hydrodynamic conditions for photoelectrochemical water splitting
2020
[EN] The present work studies the influence of hydrodynamic conditions (from 0 to 5000 rpm) during Zn anodization process on the morphology, structure and photoelectrocatalytic behavior of ZnO nanostructures. For this purpose, analysis with Confocal Laser-Raman Spectroscopy, Field Emission Scanning Electron Microscope (FE-SEM) and photoelectrochemical water splitting tests were performed. This investigation reveals that hydrodynamic conditions during anodization promoted the formation of ordered ZnO nanowires along the surface that greatly enhance its stability and increases the photocurrent density response for water splitting in a 159% at the 5000 rpm electrode rotation speed.
Bimetallic PdAg nanoparticle arrays from monolayer films of diblock copolymer micelles
2015
MICROSCOPIE+ATARI+EEH:GMA:TBG:NSP:MAO; International audience; The self-assembly technique provides a highly efficient route to generate well-ordered structures on a nanometer scale. In this paper, well-ordered arrays of PdAg alloy nanoparticles on flat substrates with narrow distributions of particle size (6-7 nm) and interparticle spacing (about 60 nm) were synthesized by the block copolymer micelle approach. A home-made PS-b-P4VP diblock copolymer was prepared to obtain a micellar structure in toluene. Pd and Ag salts were then successfully loaded in the micellar core of the PS-b-P4VP copolymer. A self-assembled monolayer of the loaded micelles was obtained by dipping the flat substrate …
Current rectification by nanoparticle blocking in single cylindrical nanopores.
2014
Blocking of a charged pore by an oppositely charged nanoparticle can support rectifying properties in a cylindrical nanopore, as opposed to the usual case of a fixed asymmetry in the pore geometry and charge distribution. We present here experimental data and model calculations to confirm this fundamental effect. The nanostructure imaging and the effects of nanoparticle concentration, pore radius, and salt concentration on the electrical conductance–voltage (G–V) curves are discussed. Logic responses based on chemical and electrical inputs/outputs could also be implemented with a single pore acting as an effective nanofluidic diode. To better show the generality of the results, different ch…
Preparation of Graphene Nanoribbons (GNRs) as an Electronic Component with the Multi-walled Carbon Nanotubes (MWCNTs)
2015
Abstract Carbon nanotubes (CNTs) have a well-defined nanostructure to exhibit high electrical conductivity and chemical stability, and have been used as an advanced material to make electrodes of super-capacitor. Graphene nanoribbons (GNRs), as manufactured by unzipping the CNTs, have more flexible adjustable electrical properties than CNTs, and are regarded an even more promising material for super-capacitor electrodes. This paper presented a series of attempts to prepare GNRs by chemically treating multi-walled carbon nanotubes (MWCNTs); this is, an Oxidation-Reduction method was tried to make GNRs by unzipping MWCNTs longitudinally. Efforts were made in various trials to find conditions …
Mapping of local conductivity variations on fragile nanopillar arrays by scanning conductive torsion mode microscopy.
2010
A gentle method that combines torsion mode topography imaging with conductive scanning force microscopy is presented. By applying an electrical bias voltage between tip and sample surface, changes in the local sample conductivity can be mapped. The topography and local conductivity variations on fragile free-standing nanopillar arrays were investigated. These samples were fabricated by an anodized aluminum oxide template process using a thermally cross-linked triphenylamine-derivate semicondcutor. The nanoscale characterization method is shown to be nondestructive. Individual nanopillars were clearly resolved in topography and current images that were recorded simultaneously. Local current−…
Structural characterization of one-dimensional ZnO-based nanostructures grown by MOCVD
2010
Various one-dimensional (1D) ZnO-based nanostructures, including ZnO nano-wires (NWs) grown using vapour-liquid-solid (VLS) process, ZnO/ZnSe core/shell, nitrogen-doped ZnO and ZnMgO NWs were grown by metalorganic chemical vapour deposition (MOCVD). Transmission electron microscopy (TEM) analysis is presented. For all the samples, a high crystalline quality is observed. Some features are emphasized such as the gold contamination of ZnO wires grown under the metal droplets in the VLS process. It is concluded that MOCVD is a suitable technique for the realization of original ZnO nanodevices.
Growth and characterization of PbI2-decorated ZnO nanowires for photodetection applications
2020
Financial support provided by Scientific Research Project for Students and Young Researchers Nr. SJZ/2017/1 realized at the Institute of Solid State Physics, University of Latvia is greatly acknowledged. The authors are grateful to Liga Bikse for XRD measurements.
Synthesis and characterization of highly ordered cobalt-magnetite nanocable arrays.
2006
Magnetically tunable, high-density arrays of coaxial nanocables within anodic aluminum oxide (AAO) membranes have been synthesized. The nanocables consist of magnetite nanowires surrounded by cobalt nanotube sheaths and cobalt nanowires surrounded by magnetite nanotube sheaths. These materials are a combination of separate hard (Co) and soft (Fe3O4) magnetic materials in a single nanocable structure. The combination of two or more magnetic materials in such a radial structure is seen as a very powerful tool for the future fabrication of magnetoresistive, spin-valve and ultrafast spin-injection devices with nonplanar geometries. The nanocable arrays were prepared using a supercritical-fluid …