Search results for "Microscopy"

Mechanical characterization of TiO2 nanofibers produced by different electrospinning techniques

2015

Abstract In this work TiO2 nanofibers produced by needle and needleless electrospinning processes from the same precursor were characterized and compared using Raman spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and in situ SEM nanomechanical testing. Phase composition, morphology, Young's modulus and bending strength values were found. Weibull statistics was used to evaluate and compare uniformity of mechanical properties of nanofibers produced by two different methods. It is shown that both methods yield nanofibers with very similar properties.

Nanoscale X-Ray Imaging of Spin Dynamics in Yttrium Iron Garnet

2019

Time-resolved scanning transmission x-ray microscopy (TR-STXM) has been used for the direct imaging of spin wave dynamics in thin film yttrium iron garnet (YIG) with spatial resolution in the sub 100 nm range. Application of this x-ray transmission technique to single crystalline garnet films was achieved by extracting a lamella (13x5x0.185 $\mathrm{\mu m^3}$) of liquid phase epitaxy grown YIG thin film out of a gadolinium gallium garnet substrate. Spin waves in the sample were measured along the Damon-Eshbach and backward volume directions of propagation at gigahertz frequencies and with wavelengths in a range between 100~nm and 10~$\mathrm{\mu}$m. The results were compared to theoretical …

Design and synthesis of colloidal nanocrystal heterostructures with tetrapod morphology.

2006

High-resolution characterization of the diffusion of light chemical elements in metallic components by scanning microwave microscopy

2014

International audience; An original sub-surface, high spatial resolution tomographic technique based on scanning microwave microscopy (SMM) is used to visualize in-depth materials with different chemical compositions. A significant phase difference in SMM between aluminum and chromium buried patterns has been observed. Moreover this technique was used to characterize a solid solution of a light chemical element (oxygen) in a metal lattice (zirconium). The large solubility of the oxygen in zirconium leads to modifications of the properties of the solid solution that can be measured by the phase shift signal in the SMM technique. The signal obtained in cross-section of an oxidized Zr sample s…

Flash synthesis of zirconia nanoparticles by microwave forced hydrolysis

2001

Forced hydrolysis preparation of zirconia sols and powders by microwave heating of zirconium tetrachloride solutions at temperatures equal to 180 °C leads in a few minutes to monodispersed nanoscale zirconia particles. Synthesis was performed in a microwave reactor called the RAMO system. This microwave reactor was designed by the authors. This flash-synthesis process combines the advantages of forced hydrolysis (homogeneous precipitation) and microwave heating (very fast heating rates). The sols and powders were characterized by x-ray diffraction,photon correlation spectroscopy (PCS), small-angle x-ray scattering, and transmission electron microscopy. Sols are colloidally stable, which mea…

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

2007

Abstract Crystalline ZrO2 nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO2 with plate-like morphology, and nanoparticles of the cubic ZrO2 high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic p…

ChemInform Abstract: Facile Synthesis and Characterization of Monocrystalline Cubic ZrO2Nanoparticles.

2008

Abstract Crystalline ZrO2 nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO2 with plate-like morphology, and nanoparticles of the cubic ZrO2 high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic p…

Identification of the contaminants present on the surface of lactose for pharmaceutical use and analysis of the impact of their presence on the inter…

2018

The discovery of the problem will go through training techniques at the nanoscale characterization and chemical analysis, the discovery of the industrial problem in society Armor Proteins, the validation of a pharmaceutical lactose. With the aim to increase our knowledge on powders for food or pharmaceutical use, we propose to study the effect of manufacturing processes, shaping, granulation on the reactivity of powders. The first part is devoted to the effect of purity on interactions-Lactose Lactose and Lactose-API measured / quantified by near-field techniques (AFM, SMM, MSAFM) under ambient atmosphere and under stressful conditions storage. Deriving a second portion of the preceding par…

Far-field imaging of the electromagnetic local density of optical states.

2008

International audience; We introduce a new experimental method to measure the local electromagnetic density of states (LDOS) by integrating the differential scattering cross section. The signal detected essentially reflects the intrinsic scattering response of the photonic structures and renders the partial LDOS dominated by evanescent modes. We give a theoretical understanding of the LDOS image formation and show a qualitative agreement between experimental images and theoretical maps. This approach can be practically applied to the direct measurement of an optical antenna's scattering efficiency and can provide valuable information for designing optimum structures utilized in radiative de…

Surface plasmon polaritons on metal cylinders with dielectric core

2001

International audience; Metal-cladded dielectric cylinders with submicron diameters may serve to model coated tips used in nearfield scanning optical microscopy. The signal measured may be greatly influenced by resonance effects due to eigenmodes of the probe. Especially, using a photon scanning tunneling microscope setup, gold-coated tips have been found to detect a signal proportional to the magnetic field distributions [E. Devaux et al.. Phys. Rev. B 62, 10 504 (2000)]. This effect is attributed to cylindrical surface plasmons. We present here fully retarded calculations of the dispersion and field patterns of the nonradiative plasmon modes in cylindrical geometry. We study the effect of…