Search results for "Modell"
showing 10 items of 2134 documents
Modelling of a recirculating photocatalytic microreactor implementing mesoporous N-TiO2 modified with graphene
2020
Abstract The use of microreactors in (photo)catalytic processes offers new possibilities for studying and optimizing many mass and photon transfer limited reactions. In this study, we propose a scalable computational fluid dynamics (CFD) model for the prediction of photocatalytic degradation of a model pollutant (4-nitrophenol) using immobilized N-doped TiO2 grown over reduced graphene oxide (N-TiO2/rGO) in a photocatalytic microreactor working in continuous flow-recirculation mode. The mode of operation used in this study allows the reduction of mass transfer limitations inherent to heterogeneous photocatalytic reactions taking place on immobilized catalysts. A CFD model was developed for …
Characterization of Non-linear Inductors Including Thermal Effects for Power Applications
2018
This paper is focused on the behaviour of non-linear inductors employed in DC/DC switching converters considering the effects due to variations of both current and temperature. The characterization of the inductors is performed by a buck converter operated to stimulate the inductor under test by a constant current with superimposed a large signal. The measurements are carried out at several inductor’s temperature values. Data are automatically collected by a novel virtual instrument developed by the authors in LabVIEW® environment aiming to obtain a polynomial based analytical model. The deep knowledge of the inductor model allows its design to be optimized improving the power density of th…
Modelling intergranular and transgranular micro-cracking in polycrystalline materials
2018
Abstract In this work, a grain boundary formulation for intergranular and transgranular micro-cracking in three-dimensional polycrystalline aggregates is presented. The formulation is based on the displacement and stress boundary integral equations of solid mechanics and it has the advantage of expressing the polycrystalline problem in terms of grain boundary variables only. The individual grains within the polycrystalline morphology are modelled as generally anisotropic linear elastic domains with random spatial orientation. Transgranular micro-cracking is assumed to occur along specific cleavage planes, whose orientation in space within the grains depend upon the crystallographic lattice.…
Mode I failure modeling of friction stir welding joints
2008
This paper analyzes mechanical response by finite element method up to the decohesion failure in fracture mode I for joints of friction stir welding (FSW) of an aluminum alloy. It first describes experimental investigations on specimens with FSW embedded, subjected to uniform traction and local punch tests used to characterize local elastic and plastic material parameters. The heterogeneity of the mechanical properties induced by the FSW process is taken into account for the elastic-plastic finite element simulation. The growing damage and the opening failure of the welding zone are described by the adoption of a cohesive interface model with specific mechanical properties.
Damage in composites : from physical mechanisms to modelling
2006
International audience; The most critical types of damage in composite materials are transverse cracking, delamination and fiber breaking. The simulation of the behaviour and the rupture of these materials shows that it is important to consider failure mechanism in the design of structures. Each mechanism induces local deteriorations which can be accelerated when they are coupled with other mechanisms. Global criteria are unable to predict neither these processes nor their interactions. This paper is an attempt to propose realistic criteria which are the witness of local degradations and can be used for the design of composite structures.
Laser heating and ablation at high repetition rate in thermal confinement regime
2006
International audience; Laser heating and ablation of materials with low absorption and thermal conductivity (paint and cement) were under experimental and theoretical investigations. The experiments were made with a high repetition rate Q-switched Nd:YAG laser (10 kHz, 90 ns pulse duration and l = 532 nm). High repetition rate laser heating resulted in pulse per pulse heat accumulation. A theoretical model of laser heating was developed and demonstrated a good agreement between the experimental temperatures measured with the infrared pyrometer and the calculated ones. With the fixed wavelength and laser pulse duration, the ablation threshold fluence of paint was found to depend on the repe…
X-ray micro-tomography based FEM modelling of hygroexpansion in PLA composites reinforced with birch pulp fibres
2017
This article presents a microscale modelling approach coupled with X-ray computed micro-tomography for the evaluation of material properties of polylactic acid (PLA) reinforced by birch pulp fibers under the effect of moisture. The results in terms of elastic moduli and hygroexpansion deformation were found in good agreement with the measurements taken at different levels of water uptake.
Buckling of a coating strip of finite width bonded to elastic half-space
2008
AbstractA solution for buckling of a stiff strip of finite width bonded to a compliant elastic half-space and subjected to uniform axial compression is presented. Approximate semi-analytical and finite element solutions are obtained and compared with a two-dimensional case of a plate on elastic foundation. The comparison demonstrates that the two-dimensional solution can be applied to predict the buckling wavelength and critical compressive strain when the width of the strip is equal to or larger than the buckling wavelength. For narrow strips, the wavelength is smaller and critical strain is higher than that of a plate on foundation.
Novel hybrid polymer composites with graphene and MXene nano-reinforcements: computational analysis
2021
This paper presents a computational analysis on the mechanical and damage behavior of novel hybrid polymer composites with graphene and MXene nano-reinforcements targeted for flexible electronics and advanced high-strength structural applications with additional functions, such as real-time monitoring of structural integrity. Geometrical models of three-dimensional representative volume elements of various configurations were generated, and a computational model based on the micromechanical finite element method was developed and solved using an explicit dynamic solver. The influence of the geometrical orientation, aspect ratio, and volume fractions of the inclusions, as well as the interfa…
A continuum damage model to simulate failure in composite plates under uniaxial compression
2007
Experimental investigations and numerical simulations are performed in order to numerically predict the buckling behaviour of thin composite laminated specimens. Experiments are aimed at two objectives: the first is to completely characterize the carbon/epoxy material under simple loading configurations, the second is to test this material in buckling and post-buckling situations. The data collected with the first campaign of experiments are used to obtain the strength parameters required to define a damage model based on the failure theory by Tsai-Wu. This model is implemented in a Finite Element (FE) code and numerical simulations of buckling are executed for unidirectional and cross-ply …