Search results for "Modulus"
showing 10 items of 491 documents
Du gâchage à l'état durci, ce sont les mêmes liaisons qui sont à l'œuvre
1998
(1998). Du gâchage a l'etat durci, ce sont les memes liaisons qui sont a l'œuvre. Revue Francaise de Genie Civil: Vol. 2, No. 7, pp. 759-765.
High pressure in-situ X-ray diffraction study on Zn-doped magnetite nanoparticles
2018
We have performed high pressure synchrotron X-ray powder diffraction experiments on two different samples of Zn-doped magnetite nanoparticles (formula Fe(3-x)ZnxO4; x = 0.2, 0.5). The structural behavior of then a noparticles was studied up to 13.5 GPa for x = 0.2, and up to 17.4 GPa for x = 0.5. We have found that both systems remain in the cubic spinel structure as expected for this range of applied pressures. The analysis of the unit cell volume vs. pressure results in bulk modulus values lower than in both end-members, magnetite (Fe3O4) and zinc ferrite (ZnFe2O4), suggesting that chemical disorder may favor compressibility, which is expected to improve the increase of the Neel temperatu…
Impact of point defects on the elastic properties of BaZrO3: Comprehensive insight from experiments and ab initio calculations
2018
Abstract Acceptor doped BaZrO3 is the prototype of proton conducting perovskites which are of strong interest as electrolytes for intermediate temperature fuel cells. Elastic properties of both dry and hydrated Y-doped BaZrO3 (1.5–17 mol% Y) were determined using ultrasound time of flight (TOF) measurements, and complemented by ab initio calculations which allow for an analysis of the different contributions. The experimental and theoretical findings are consistent and reveal a strong decrease of the Young's, shear and bulk moduli upon increasing dopant concentration. This decrease is attributed to a combined effect of (i) macroscopic lattice chemical expansion mainly caused by differing io…
Structural factor in bending testing of fivefold twinned nanowires revealed by finite element analysis
2016
In this study, we performed finite element method simulations to investigate the effect of the structure on the elastic response of Ag and Au nanowires (NWs) with a fivefold twinned crystal structure in bending tests. Two different models of a pentagonal NW were created: a 'uniform model' having an isotropic continuous structure and a 'segmented model' consisting of five anisotropic domains. Two asymmetrical mechanical test configurations were simulated: cantilevered beam bending and 3-point bending. The dimensions of the NW, the test configurations, as well as the force and the displacement ranges were based on the previously obtained experimental data. The results of the simulations demon…
Elastic Properties and Line Tension of Self-Assembled Bilayer Membranes
2013
The elastic properties of a self-assembled bilayer membrane are studied using the self-consistent field theory, applied to a model system composed of flexible amphiphilic chains dissolved in hydrophilic polymeric solvents. Examining the free energy of bilayer membranes with different geometries allows us to calculate their bending modulus, Gaussian modulus, two fourth-order membrane moduli, and the line tension. The dependence of these parameters on the microscopic characteristics of the amphiphilic chain, characterized by the volume fraction of the hydrophilic component, is systematically studied. The theoretical predictions are compared with the results from a simple monolayer model, whic…
Mechanical, thermal and electrical properties of monolayer and bilayer graded Al/SiC/rice husk ash (RHA) composite
2017
Abstract The mechanical, electrical and thermal properties as well as thermal expansion of Al/SiC/RHA (rice husk ash) monolayer and bilayer composite have been studied using the Taguchi method and analysis of variance (ANOVA). The parameter that most significantly affects the modulus of elasticity of Al/SiC/RHA bilayer composites is processing time, with contribution percentages of 68 and 27% calculated from stress-strain graphs and ultrasonic method, respectively. However, the factor which mostly affects bending strength, CTE value and electrical resistivity of composites is process temperature with contribution percentages of 32, 28, and 22%, respectively. The projected values for modulus…
Response of Cross-Ply Composite to Off-Axis Loading
2002
Polymer composites are known to exhibit nonlinear stress–strain response due to nonlinearly elastic or plastic deformation of the matrix and damage accumulation. Mechanistic modeling of material response explicitly accounting for these interacting factors often leads to complex theories. Plasticity theory formalism provides an alternative for nonlinear deformation description of composite material. We examine the applicability of an orthotropic plasticity model, developed by Sun et al. for unidirectionally reinforced composite, to composite laminate. The response of a symmetric and balanced cross-ply glass/epoxy laminate is studied under uniaxial tensile loading at different angles to the …
Microwave sintering of porous Ti–Nb-HA composite with high strength and enhanced bioactivity for implant applications
2020
Abstract In the present study, high order porous Ti–Nb(50-x)-HA(x) (x = 0,10,20 wt %) composites have been fabricated for orthopedic application by using powder metallurgical route consisting temporary space alloying and rapid microwave sintering process. Structural porosity, elastic modulus, compressive strength, corrosion resistance, and in-vitro bioactivity of as-sintered Ti–Nb-HA composites were studied. Results showed that the reinforcement of the HA assists in the formation of structural porosity, which reduced the elastic modulus. Porous Ti–Nb (with HA 10–20% content) composite possessed 40–60% structural porosity with a pore size of 150–260 μm and exhibited elastic modulus in the ra…
Analysis of Fractional Viscoelastic Material With Mechanical Parameters Dependent on Random Temperature
2017
It is well known that mechanical parameters of polymeric materials, e.g., epoxy resin, are strongly influenced by the temperature. On the other hand, in many applications, the temperature is not known exactly during the design process and this introduces uncertainties in the prevision of the behavior also when the stresses are deterministic. For this reason, in this paper, the mechanical behavior of an epoxy resin is characterized by means of a fractional viscoelastic model at different temperatures; then, a simple method to characterize the response of the fractional viscoelastic material at different temperatures modeled as a random variable with assigned probability density function (PDF…
Thermal and elastic properties of poly(vinyl chloride) (PVC) + chlorinated polyethylene (CPE) blends
2003
Eight types of PVC + CPE blends with different weight ratios (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) are tested. Data on the heat conductivity, thermal diffusivity, and heat capacity of the blends investigated are reported. Primary attention is paid to the structural approach for effective elastic constants: bulk, shear, and Young's modulae. The blends are considered as random mixtures of two isotropic constituents. It is found that the elastic moduli may be well represented by the Kerner and Budiansky equations.