Search results for "Multiplexer"
showing 10 items of 30 documents
Wireless ECG and cardiac monitoring systems: State of the art, available commercial devices and useful electronic components
2021
Abstract Wireless ElectroCardioGram (ECG) systems are employed in manifold application fields: tele-monitoring, sport applications, support to ageing people at home, fetal ECG, wearable devices and ambulatory monitoring. The presence of cables often hinders user’s free movements, alongside clinicians’ routine operations. Therefore, wireless ECG systems are desirable. This paper aims at reviewing the solutions described in the literature, besides commercially available devices and electronic components useful to setup laboratory prototypes. Several systems have been developed, different in terms of the adopted technology; when approaching the development of a wireless ECG system, some import…
Efficient Design of Waveguide Manifold Multiplexers Based on Low-Order EM Distributed Models
2015
In this paper, a new systematic technique to design manifold-coupled multiplexers in waveguide technology is proposed. The new technique uses generalized low-order electromagnetic (EM) distributed models, which constitute a half-way point between the fast, but imprecise, analytical models, and the more accurate, but costly, full-wave EM models. The method can be applied to contiguous and noncontiguous channel multiplexers, in both E-plane or H-plane configurations. This paper covers the complete design procedure for manifold multiplexers, starting from the required specifications and finishing with the physical dimensions. After explaining the general design technique for multiplexers with …
Functional super Read-Out Driver demonstrator for the Phase II Upgrade of the ATLAS Tile Calorimeter
2011
This work presents the implementation of a functional super Read-Out Driver (sROD) demonstrator for the Phase II Upgrade of the ATLAS Tile Calorimeter (TileCal) in the LHC experiment. The proposed front-end for the Phase II Upgrade communicates with back-end electronics using a multifiber optical connector with a data rate of 57.6 Gbps using the GBT protocol. This functional sROD demonstrator aims to help in the understanding of the problems that could arise in the upgrade of back-end electronics. The demonstrator is composed of three different boards that have been developed in the framework of ATLAS activities: the Optical Multiplexer Board (OMB), the Read-Out Driver (ROD) and the Optical…
Robustness of 40 Gb/s ASK modulation formats in the practical system infrastructure.
2006
In this work, we analyzed by means of numerical and laboratory experiments the resilience of 40 Gb/s amplitude shift keying modulation formats to transmission impairments in standard single-mode fiber lines as well as to optical filtering introduced by the optical add/drop multiplexer cascade. Our study is a pre-requisite to assess the implementation of cost-effective 40 Gb/s modulation technology in next generation high bit-rate robust optical transport networks. © 2006 Optical Society of America.
Fault Tolerant Routing Methodology for Mesh-of-Tree based Network-on-Chips using Local Reconfiguration
2018
Increase in the processing elements in a System-on- Chip (SoC) has led to an increasing complexity between the cores in the entire network. This communication bottleneck led to rise in the new paradigm called Network-on-Chip (NoC). These NoC are very much susceptible to various types of faults which can be transient, intermittent or permanent. This paper presents a fault-tolerant routing technique which can route the packets from a source to a destination in presence of permanent faults in the leaf routers of Mesh-of-Tree topology where cores are connected. This is achieved by using reconfiguration in the local ports of the leaf routers by inserting multiplexers as a layer between the leaf …
Optical demultiplexing of millimeter-wave subcarriers for wireless channel distribution employing dual wavelength FBGs
2007
An optical mm-wave demultiplexer is presented. Double sideband modulation with suppressed optical carrier and filtering properties of dual overwritten fiber Bragg gratings are the fundamentals for optical demultiplexing of mm-wave radio-on-fiber signals: using a single optical carrier, Millimeter-wave signals of 20 and 40 GHz frequencies carrying independent data are created, transmitted over fiber, demultiplexed and wireless distributed to be detected and data recovered in a mobile unit. Double sideband modulation with suppressed optical carrier yields no power penalty due to chromatic dispersion, while the filtering properties of the dual overwritten fiber Bragg gratings allow less than −…
Optical flip-flop memory and routing operation based on polarization bistability in optical fiber
2014
A polarization bistability and hysteresis cycle phenomenon is demonstrated in optical fibers thanks to a counter-propagating four-wave mixing interaction. Based on this process, we successfully report the proof-of-principle of an optical flip-flop memory and a 10-Gbit/s routing operation.
Optoelectronic Module with Integrated Transceiver and Mux-Demux for Optical Interconnect Applications
2019
The design, development and improvtableement in electronic devices and components have led to the further miniaturization of the system devices and their interconnecting interfaces. Hence, reducing the size of the transmitter (Tx) chips, receiver (Rx) chips and associated components play an important role in designing a reduced/small sized optoelectronic modules for optical interconnect applications. Some of the associated components include multiplexer, demultiplexer, clock and data recovery circuits (CDR), etc. Therefore, in this paper we present an optoelectronic module with integrated transceiver (Tx-Rx) and multiplexer-demultiplexer (mux-demux) with the aim of reducing the total area o…
Optical Link Card Design for the Phase II Upgrade of TileCal Experiment
2011
This paper presents the design of an optical link card developed in the frame of the R&D activities for the phase 2 upgrade of the TileCal experiment. This board, that is part of the evaluation of different technologies for the final choice in the next years, is designed as a mezzanine that can work independently or be plugged in the optical multiplexer board of the TileCal backend electronics. It includes two SNAP 12 optical connectors able to transmit and receive up to 75 Gb/s and one SFP optical connector for lower speeds and compatibility with existing hardware as the read out driver. All processing is done in a Stratix II GX field-programmable gate array (FPGA). Details are given on th…
Efficient and Accurate Consideration of Ohmic Losses in Waveguide Diplexers and Multiplexers
2006
The accurate consideration of all ohmic losses effects in waveguide manifold diplexers and multiplexers is rigorously studied in this paper. For such purposes, a full-wave CAD tool based exclusively on modal methods is originally proposed. Proceeding in this very efficient way, losses are precisely considered in all common components of such complex devices, i.e. planar junctions, uniform lines and multi-port circuits implemented in waveguide technology. For verification purposes, we have successfully compared our results for a magic-T junction and a manifold diplexer with experimental and numerical results.