Search results for "NANOCOMPOSITE"
showing 10 items of 641 documents
Creep and recovery of epoxy/MWCNT nanocomposites
2012
Abstract Creep and creep–recovery of epoxy/multi-wall carbon nanotube (MWCNT) composites was studied in a wide range of applied loads in order to evaluate the contribution of nanotubes on the time-dependent behaviour of the epoxy matrix. Incorporation of up to 1 wt.% of C150P MWCNTs has negligible influence on the elastic, viscoelastic and viscoplastic response of the epoxy system. No systematic changes of the creep characteristics depending on the content of nanotubes are noticed in the range of stresses from 0.3 up to 0.75 from the ultimate strength. Creep resistance and recovery performance of the epoxy matrix is not negatively affected by the addition of MWCNTs and the same analytical m…
Green synthesis of Pd@graphene nanocomposite: Catalyst for the selective oxidation of alcohols
2016
Abstract Due to their excellent physicochemical properties and synergistic effect, graphene metallic NPs based nanocomposites have gained significant attention in various technological fields including catalysis. Here we demonstrate a single pot, facile and environmental friendly synthesis of catalytically active palladium(Pd)@graphene nanocomposites (SP-HRG-Pd) by the simultaneous reduction of graphene oxide (GRO) and PdCl 2 using Salvadora persica L. (miswak) root extract (RE) as bioreductant. The synthesis of SP-HRG-Pd was confirmed by various spectroscopic and microscopic techniques, including ultraviolet–visible (UV–vis), Fourier-transform infrared (FT-IR), Raman and X-ray photoelectro…
Layered composite based on halloysite and natural polymers: a carrier for the pH controlled release of drugs
2019
We have prepared new biohybrid materials based on halloysite nanotubes and natural polymers (alginate and chitosan) for the controlled and sustained release of bioactive species. A functional nanoarchitecture has been designed allowing us to generate a layered tablet with a chitosan/halloysite nanocomposite film sandwiched between two alginate layers. The assembly of the raw components and the final structure of the hybrid tablet have been highlighted by the morphological and wettability properties of the prepared materials. Since the biohybrid has been designed as a smart carrier, halloysite nanotubes have been first loaded with a model drug (sodium diclofenac). The effect of the tablet th…
Lipid Nanocarriers-Loaded Nanocomposite as a Suitable Platform to Release Antibacterial and Antioxidant Agents for Immediate Dental Implant Placement…
2021
Immediate implant placement is a single-stage restorative approach for missing teeth widely used to overcome the ridge remodeling process occurring after dental extractions. The success of this procedure relies on opportune osseointegration in the surrounding tissues. To support this process, a multifunctional nanocomposite, to be applied in the fresh post-extraction socket, was here designed, prepared, and characterized. This formulation consists of quercetin (QRC)-loaded nanostructured lipid carriers (NLCs) entrapped in a chitosan-based solid matrix containing ciprofloxacin (CPX). QRC-NLCs were prepared by homogenization followed by high-frequency sonication, and thereafter this dispersio…
Core/Shell Gel Beads with Embedded Halloysite Nanotubes for Controlled Drug Release
2019
The use of nanocomposites based on biopolymers and nanoparticles for controlled drug release is an attractive notion. We used halloysite nanotubes that were promising candidates for the loading and release of active molecules due to their hollow cavity. Gel beads based on chitosan with uniformly dispersed halloysite nanotubes were obtained by a dropping method. Alginate was used to generate a coating layer over the hybrid gel beads. This proposed procedure succeeded in controlling the morphology at the mesoscale and it had a relevant effect on the release profile of the model drug from the nanotube cavity.
Effect of kind and content of organo-modified clay on properties of PET nanocomposites
2011
In this work we report the properties of nanocomposite based on PET with two different samples of organically modified montmorillonites. In particular, we studied the effect of the filler concentration on morphology, rheology, and mechanical performance, focusing our attention on the effect of the degradation phenomena of the clay modifiers. The results indicate that at low clay level the morphology achieved is mainly intercalated. On increasing the filler level, coalescence and/or bad defragmentation phenomena induce a coarser morphology, as confirmed by XRD, SEM, and TEM observations. When a more polar organic modifier is used to modify the clay, the particle adhesion and distribution is …
Synthesis of Hierarchically Grown ZnO@NT-WS2 Nanocomposites
2009
A chemically specific and facile method for growth of ZnO nanorods on WS2 nanotubes (NT-WS2) is reported. The modification strategy is based on the chalcophilic affinity of Zn, which serves as an anchor to immobilize ZnO colloids onto the WS2 nanotubes. The surface bound ZnO colloids have been used as a seed to grow ZnO nanorods on WS2 nanotubes. The immobilization of ZnO colloids was monitored by UV−vis spectroscopy and photoluminescence spectroscopy whereas the growth of ZnO nanorods was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).
Liquid Crystalline Orientation of Semiconducting Nanorods in a Semiconducting Matrix
2008
This paper describes the synthesis of narrowly distributed block copolymers consisting of a hole conducting triarylamine block and an anchor block via RAFT polymerization. The anchor block is thereby introduced via a reactive ester approach. Block copolymers with dopamine anchor groups bind to oxidic semiconductors like TiO 2 , SnO 2 , and ZnO. Thus, it becomes possible to cover inorganic electron conducting (acceptor) nanomaterials with a corona of an organic hole conducting (donor) polymer like poly(triphenylamine), giving new hybrid materials. The poly(triphenylamine) grafted to inorganic nanorods allows the preparation of stable nanorod dispersions in appropriate solvents. At higher con…
Hybrids composites of NCCO/PEDOT for thermoelectric applications
2017
Abstract Organic materials are becoming a realistic roadway to fabricate efficient thermoelectric devices using environmental friendly materials. Such requirements are actually fulfilled by thermoelectric generators operating by conducting polymers, but also by hybrid materials. The combination of organic + inorganic compounds may exhibit a high electrical conductivity and Seebeck coefficient as well as lower thermal conductivity in order to efficiently generate thermoelectric power. In these hybrid compounds, perovskite-type oxides are a suitable election for the inorganic part since they have a high Seebeck coefficient although their electrical conductivity is usually low. Blending them w…
Optical properties of biocompatible polyaniline nano-composites
2006
Abstract Polyaniline (PANI) is an electro-active polymer of great interest thanks to its outstanding physical and chemical properties which make it suitable for various applications in optics, bioelectronics, biosensors, diagnostics and therapeutic devices. Unfortunately, PANI is infusible and insoluble in most common solvents and, thus, very difficult to process. In the attempt of improving processability, yet preserving its interesting properties, PANI has been synthesized in the form of particles and dispersed into a hydrogel matrix. The synthesis of PANI–hydrogel composites proceeds via γ-irradiation of PANI dispersions as obtained by ‘in situ’ polymerization of aniline in the presence …