Search results for "NANOCRYSTALLINE"
showing 10 items of 145 documents
Hydrothermal Synthesis of Cobalt Ferrite Nanosized Powders
2015
Cobalt ferrite powders are synthesized by the co-precipitation technology, combined with the hydrothermal synthesis method and crystallite size, specific surface area (SSA), magnetic properties of synthesized products are obtained. All the synthesized ferrites are nanocrystalline single phase materials with crystallite size of 10-16 nm the SSA of 60±5 m2/g and the calculated particle size of 20±2 nm. Synthesized Co ferrites are characterized by the saturation magnetization MS of 59-60 emu/g, remanent magnetization Mr of 23 emu/g and coercivity Hc of 570-650 Oe.
Microwave-induced electromigration in multicomponent metallic alloys
2010
The crystallization of amorphous FeCoCuZrAlSiB alloy ribbons during microwave heating was investigated in situ using time-resolved X-ray powder diffraction. The formation of the nanocrystalline α-(Fe,Co)(SiAl) phase during the primary crystallization stage is followed by the crystallization of the residual glassy matrix. Scanning electron microscopy analysis after microwave exposure reveals the formation of nanosized hillocks evenly distributed over the ribbon surfaces. Local chemical composition analysis by energy-dispersive spectroscopy shows that the surface clusters are enriched in Cu and Al. The occurrence of this typical electromigration effect imposes a strong restriction on the dura…
Performance Study of Split Ferrite Cores Designed for EMI Suppression on Cables
2020
The ideal procedure to start designing an electronic device is to consider the electromagnetic compatibility (EMC) from the beginning. Even so, EMC problems can appear afterward, especially when the designed system is interconnected with external devices. Thereby, electromagnetic interferences (EMIs) could be transmitted to our device from power cables that interconnect it with an external power source or are connected to another system to establish wired communication. The application of an EMI suppressor such as a sleeve core that encircles the cables is a widely used technique to attenuate EM disturbances. This contribution is focused on the characterization of a variation of this cable …
Structural and Vibrational Properties of Corundum-type In2O3 Nanocrystals under Compression
2017
[EN] This work reports the structural and vibrational properties of nanocrystals of corundum-type In2O3 (rh-In2O3) at high pressures by using angle-dispersive x-ray diffraction and Raman scattering measurements up to 30 GPa. The equation of state and the pressure dependence of the Raman-active modes of the corundum phase in nanocrystals are in good agreement with previous studies on bulk material and theoretical simulations on bulk rh-In2O3. Nanocrystalline rh-In2O3 showed stability under compression at least up to 20 GPa, unlike bulk rh-In2O3 which gradually transforms to the orthorhombic Pbca (Rh2O3-III-type) structure above 12 14 GPa. The different stability range found in nanocrystallin…
Oxidation of nanocrystalline aluminum by variable charge molecular dynamics
2010
International audience; We investigate the oxidation of nanocrystalline aluminum surfaces using molecular dynamics (MD) simulations with the variable charge model that allows charge dynamically transfer among atoms. The interaction potential between atoms is described by the electrostatic plus (Es+) potential model, which is composed of an embedded atom method potential and an electrostatic term. The simulations were performed from 300 to 750K on polycrystalline samples with a mean grain size of 5 nanometers. We mainly focused on the effect of the temperature parameter on the oxidation kinetic. The results show that, beyond a first linear regime, the kinetics follow a direct logarithmic law…
Structure and oxide ion conductivity: local order, defect interactions and grain boundary effects in acceptor-doped ceria
2014
The long-range and short-range structure of nanocrystalline and microcrystalline acceptor-doped ceria is investigated by a combined approach using EXAFS, XANES, Raman, and XRD, and correlated with the oxide-ion conductivity in the bulk and in grain boundaries. Compared to Yb3+ and Er3+, the positive influence of Sm3+ is attributed to the ability to repel oxygen vacancies, and to keep a localized disorder around the dopant. The long-range structural analysis shows lattice contraction for Yb- and Er-doping and lattice expansion for Sm-doping. The short-range analysis around the dopants and cerium highlights that a more complex structural rearrangement has to be assumed to explain the compleme…
Effect of the dopant selection (Er, Eu, Nd or Ce) and its quantity on the formation of yttrium aluminum garnet nanopowders
2008
Abstract Hydroxide precursors, synthesized using the co-precipitation method, were calcined for 1 h at the temperatures of 900, 1000 and 1100 °C, respectively, and heated directly to 1500 °C to produce various Y 3 Al 5 O 12 (YAG) nanopowders with different doping quantities of erbium, europium, neodymium and cerium. All samples were investigated using thermo-gravimetry (TG) and differential thermal analysis (DTA), field emission gun-scanning electron microscopy (FEG-SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). TG and DTA experiments were performed from room temperature up to 1500 °C; the weight loss curves combined with the presence of exo- and endo-thermal even…
Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors
2013
Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10–15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition,…
Nanoscale structural and electrical properties of graphene grown on AlGaN by catalyst-free chemical vapor deposition
2020
The integration of graphene (Gr) with nitride semiconductors is highly interesting for applications in high-power/high-frequency electronics and optoelectronics. In this work, we demonstrated the direct growth of Gr on Al0.5Ga0.5N/sapphire templates by propane (C3H8) chemical vapor deposition (CVD) at temperature of 1350{\deg}C. After optimization of the C3H8 flow rate, a uniform and conformal Gr coverage was achieved, which proved beneficial to prevent degradation of AlGaN morphology. X-ray photoemission spectroscopy (XPS) revealed Ga loss and partial oxidation of Al in the near-surface AlGaN region. Such chemical modification of a 2 nm thick AlGaN surface region was confirmed by cross-sec…
Effects of Grain Boundary Decoration on the Electrical Conduction of Nanocrystalline CeO2
2012
In this study, we investigate the effect of decorating the grain boundaries of nanocrystalline undoped ceria on the electrical transport properties. For the decoration, different acceptors (Yb, Y, Bi) were chosen. On decoration, the conduction switches from electronic to ionic. Upon sintering the grains are characterized by a core-shell configuration, in which the core remains undoped while the shell is heavily doped as a consequence of the diffusion of the acceptors toward the grain interior. The shell dominates the overall transport properties of the nanocrystalline ceria and is found to be in the mesoscopic regime.