Search results for "NEWA"
showing 10 items of 2491 documents
A Criterion for Rating the Usability and Accuracy of the One-Diode Models for Photovoltaic Modules
2016
In selecting a mathematical model for simulating physical behaviours, it is important to reach an acceptable compromise between analytical complexity and achievable precision. With the aim of helping researchers and designers working in the area of photovoltaic systems to make a choice among the numerous diode-based models, a criterion for rating both the usability and accuracy of one-diode models is proposed in this paper. A three-level rating scale, which considers the ease of finding the data used by the analytical procedure, the simplicity of the mathematical tools needed to perform calculations and the accuracy achieved in calculating the current and power, is used. The proposed criter…
Assessment of the Usability and Accuracy of the Simplified One-Diode Models for Photovoltaic Modules
2016
Models for photovoltaic (PV) cells and panels, based on the diode equivalent circuit, have been widely used because they are effective tools for system design. Many authors have presented simplified one-diode models whose three or four parameters are calculated using the data extracted from the datasheets issued by PV panel manufactures and adopting some simplifying hypotheses and numerical solving techniques. Sometimes it may be difficult to make a choice among so many models. To help researchers and designers working in the area of photovoltaic systems in selecting the model that is fit for purpose, a criterion for rating both the usability and accuracy of simplified one-diode models is p…
ZnO Nanoestructured Layers Processing with Morphology Control by Pulsed Electrodeposition
2011
The fabrication of nanostructured ZnO thin films is a critic process for a lot of applications of this semiconductor material. The final properties of this film depend fundamentally of the morphology of the sintered layer. In this paper a process is presented for the fabrication of ZnO nanostructured layers with morphology control by pulsed electrodeposition over ITO. Process optimization is achieved by pulsed electrodeposition and results are assessed after a careful characterization of both morphology and electrical properties. SEM is used for nucleation analysis on pulsed deposited samples. Optical properties like transmission spectra and Indirect Optical Band Gap are used to evaluate th…
Electrochemical Deposition Mechanism for ZnO Nanorods: Diffusion Coefficient and Growth Models
2011
Fabrication of nanostructured ZnO thin films is a critical process for many applications based on semiconductor devices. So on understanding of the electrochemical deposition mechanism is also fundamental for knowing the optimal conditions on growth of ZnO nanorods by electrodeposition. In this paper the electrochemical mechanism for ZnO nanorods formation is studied. Results are based on the evolution of the diffusion coefficient using the Cotrell equation, and different growth models proposed by Scharifcker and Hills for nucleation and growth.
Performance of an outdoor membrane photobioreactor for resource recovery from anaerobically treated sewage
2018
[EN] The objective of this work was to evaluate the performance of a pilot scale membrane photobioreactor (MPBR) for treating the effluent of an anaerobic membrane bioreactor (AnMBR) system. In particular, new experimental data on microalgae productivity, nutrient recovery, CO2 biofixation and energy recovery potential was obtained under different operating conditions, which would facilitate moving towards cost-effective microalgae cultivation on wastewater. To this aim, a 2.2-m(3) MPBR equipped with two commercial-scale hollow-fibre ultrafiltration membrane modules was operated treating the nutrient-loaded effluent from an AnMBR for sewage treatment. The influence of several design, enviro…
Environmental impact of submerged anaerobic MBR (SAnMBR) technology used to treat urban wastewater at different temperatures
2013
[EN] The objective of this study was to assess the environmental impact of a submerged anaerobic MBR (SAnMBR) system in the treatment of urban wastewater at different temperatures: ambient temperature (20 and 33 degrees C), and a controlled temperature (33 degrees C). To this end, an overall energy balance (OEB) and life cycle assessment (LCA), both based on real process data, were carried out. Four factors were considered in this study; (1) energy consumption during wastewater treatment; (2) energy recovered from biogas capture; (3) potential recovery of nutrients from the final effluent; and (4) sludge disposal. The OEB and LCA showed SAnMBR to be a promising technology for treating urban…
Water resource recovery by means of microalgae cultivation in outdoor photobioreactors using the effluent from an anaerobic membrane bioreactor fed w…
2016
[EN] With the aim of assessing the potential of microalgae cultivation for water resource recovery (WRR), the performance of three 0.55 m3 flat-plate photobioreactors (PBRs) was evaluated in terms of nutrient removal rate (NRR) and biomass production. The PBRs were operated outdoor (at ambient temperature and light intensity) using as growth media the nutrient-rich effluent from an AnMBR fed with pre-treated sewage. Solar irradiance was the most determining factor affecting NRR. Biomass productivity was significantly affected by temperatures below 20 °C. The maximum biomass productivity (52.3 mg VSS·L−1·d−1) and NRR (5.84 mg NH4-N·L−1·d−1 and 0.85 mg PO4-P·L−1·…
Short and long-term experiments on the effect of sulphide on microalgae cultivation in tertiary sewage treatment.
2017
[EN] Microalgae cultivation appears to be a promising technology for treating nutrient-rich effluents from anaerobic membrane bioreactors, as microalgae are able to consume nutrients from sewage without an organic carbon source, although the sulphide formed during the anaerobic treatment does have negative effects on microalgae growth. Short and long-term experiments were carried out on the effects of sulphide on a mixed microalgae culture. The short-term experiments showed that the oxygen production rate (OPR) dropped as sulphide concentration increased: a concentration of 5 mg S L¿1 reduced OPR by 43%, while a concentration of 50 mg S L¿1 came close to completely inhibiting microalgae gro…
Rigenerazione di aree produttive dismesse nel territorio della Val Chisone in Piemonte. L’ex setificio Gütermann di Perosa Argentina
2017
Il paper presenta i risultati parziali di un’attività di ricerca che l’autrice sta svolgendo in Piemonte nell’ambito del Bando Talenti della Società Civile promosso dalla Fondazione Giovanni Goria e dalla Fondazione CRT, cofinanziato dall’associazione spagnola INCUNA (Industria, Cultura, Naturaleza) di Gijón. La ricerca riguarda le tematiche della rigenerazione partecipata delle aree produttive dismesse come risorsa per lo sviluppo territoriale. L’articolo si focalizza sul territorio della Val Chisone, situato nella provincia torinese e a stretto contatto con la realtà transfrontaliera. La ricerca pone l’attenzione sull’analisi delle peculiarità di questa valle che grazie alla sua posizione…
Fed-batch simultaneous saccharification and fermentation including in-situ recovery for enhanced butanol production from rice straw
2021
Abstract This paper describes a study of fed-batch SSFR (simultaneous saccharification, fermentation and recovery) for butanol production from alkaline-pretreated rice straw (RS) in a 2-L stirred tank reactor. The initial solid (9.2% w/v) and enzyme (19.9 FPU g-dw-1) loadings were previously optimized by 50-mL batch SSF assays. Maximum butanol concentration of 24.80 g L-1 was obtained after three biomass feedings that doubled the RS load (18.4% w/v). Butanol productivity (0.344 g L-1h−1) also increased two-fold in comparison with batch SSF without recovery (0.170 g L-1h−1). Although fed-batch SSFR was able to operate with a single initial enzyme dosage, an extra dosage of nutrients was requ…