Search results for "NEWA"
showing 10 items of 2491 documents
An integrated environmental indicator for urban transportation systems: description and application
2015
A simplified version of the ecological footprint method is proposed for assessing the environmental performances of urban transportation systems. The method, starting from the knowledge of the composition of the running vehicular fleet, is here applied to a southern Italian province. It represents a synthetic indicator of the environmental pressure exerted by the system also matching the pollutant emissions with the carrying capacity of the site. Particularly, the forested area needed to absorb the CO2 emissions of the system is compared with the total forested area of the province. The results of the case-study indicates the yearly maximum distance that each vehicle of the fleet can cover …
Behavior of alloying elements during anodizing of Mg-Cu and Mg-W alloys in a fluoride/glycerol electrolyte
2015
Anodizing of sputtering-deposited magnesium and Mg-0.75at.%Cu and Mg-1.23at.%W alloys has been carried out in a fluoride/ glycerol electrolyte. The aims of the study were to investigate the enrichment of alloying elements in the alloy immediately beneath the anodic film and the migration of alloying element species in the film. The specimens were examined by electron microscopy and ion beam analysis. An enrichment of copper is revealed in the Mg-Cu alloy that increases with the anodizing time up to ∼6×1015 Cu atoms cm-2. Copper species are then incorporated into the anodic film and migrate outwards. In contrast, no enrichment of tungsten occurs in the Mg-W alloy, and tungsten species are im…
The Amorphous Semiconductor Schottky Barrier Approach to Study the Electronic Properties of Anodic Films on Ti
2017
A detailed study of the electronic properties of thin (>20 nm) anodic TiO2 potentiostatically grown on titanium in two different solutions is presented. The results show that the nature of the anodizing solution affects the electronic properties of the anodic film and, more specifically, the density of electronic states (DOS) distribution. Different DOS were derived from the experimental data analyzed according to the theory of amorphous semiconductor (a-SC) Schottky barrier. It is shown that the usual non-linear and frequency dependent Mott-Schottky plots are in agreement with expected theoretical behavior of a-SC Schottky barrier.
Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated …
2007
Abstract One of challenges in improving the performance and cost-effectiveness of solid oxide fuel cells (SOFCs) is the development of suitable interconnect materials. Recent researches have enabled to decrease the operating temperature of the SOFC from 1000 to 800 °C. Chromia forming alloys are then among the best candidates for interconnects. However, low electronic conductivity and volatility of chromium oxide scale need to be solved to improve interconnect performances. In the field of high temperature oxidation of metals, it is well known that the addition of reactive element into alloys or as thin film coatings, improves their oxidation resistance at high temperature. The elements of …
Critical Review—Photocurrent Spectroscopy in Corrosion and Passivity Studies: A Critical Assessment of the Use of Band Gap Value to Estimate the Oxid…
2017
A critical assessment of the Photocurrent Spectroscopy (PCS) Technique for the semi-quantitative characterization of passive film and corrosion layers composition is carried out. We take into account more than three decades of PCS usage as "in-situ" analytical technique and related results as well as the criticism of the underlying semi-empirical correlation relating the measured optical bandgap (Eg) to the passive film composition. The discrepancies between the experimental data, gathered by PCS measurements, and Egestimates originating from recently developed Density Functional Theory based modeling of solid state properties are stressed with particular emphasis on the case of anodic pass…
Light-Induced Formation of Pb3+Paramagnetic Species in Lead Halide Perovskites
2018
Hybrid halide perovskites are soft materials processed at room temperature, revolutionary players in the photovoltaic field. Nowadays, investigation of the nature and role of defects is seen as one of the key challenges toward full comprehension of their behavior and achievement of high device stability under working conditions. We reveal the reversible generation, under illumination, of paramagnetic Pb3+ defects in CH3NH3PbI3, synthesized in ambient conditions, induced by the presence of Pb-O defects in the perovskite structure that may trap photogenerated holes, possibly mediated by the concomitant oxidation and migration of ions. According to the mechanism that we hypothesize, one charge…
Investigation of Annealing Conditions on Electrochemically Deposited CZTS Film on Flexible Molybdenum Foil
2016
In thiswork, the electrodeposition of Cu2ZnSnS4 thin films on molybdenum thin foilwas reported. In order to guarantee co-deposition of elements with different standard electrochemical potential, an aqueous electrolyte added with ligand agents was used. I addition, deposition parameters were carefully chosen, in order to ensure good quality and suitable composition of the films. The deposited films were sulfurized in controlled atmosphere at 580?C, scrutinizing the influence of the annealing conditions on the features of the films. Structure, morphology and composition were investigated by XRD SEM, EDS and Raman spectroscopy. Results reveal the growth of good quality films, with a uniform mo…
Physico-Chemical Characterization of Anodic Oxides on Hf as a Function of the Anodizing Conditions
2016
Anodic films were grown to 5 V (Ag/AgCl) on mechanically polished Hf in 0.1 M ammonium biborate and 0.1 M NaOH. Independent of the anodizing conditions, the photoelectrochemical characterization allowed the observation of optical transitions at 3.25 eV, i.e. at photon energy lower than the bandgap of HfO2. They are attributed to localized states inside the gap of the oxide induced by the presence of oxygen vacancies. From the cathodic photocurrent spectra, it was possible to estimate an energy threshold of ∼2.15 eV for internal electron photoemission phenomena. The impedance measurements proved the formation of insulating oxides with ϵ =19. The anodizing occurs under a high field regime wit…
Effect of High Temperature Oxidation Process on Corrosion Resistance of Bright Annealed Ferritic Stainless Steel
2017
The corrosion resistance of stainless steels is determined by the thickness, structure, composition and electronic properties of the oxide layers grown on their surface and isolating the metallic substrate from the environment. In the present work, ex situ XPS (X-Ray Photoelectron Spectroscopy) and ToF-SIMS (Time of Flight Secondary Ions Mass Spectrometry) have been combined to in situ PCS (PhotoCurrent Spectroscopy) in order to perform an integrated physicochemical characterization of surface oxide films grown on bright annealed ferritic stainless steel (AISI 434) as-received and after thermal post-treatment in air. The surface oxide film on as-received samples has a bilayer structure with…
Effects of Pulse Current Mode on Plasma Electrolytic Oxidation of 7075 Al in KMnO4Containing Solution
2017
Plasma electrolytic oxidation of 7075 Al alloy was performed in alkaline silicate electrolyte containing KMnO4as an additive using unipolar (U) and bipolar pulsed current modes (B1 and B2). The coating grown using the bipolar current with longer cathodic pulse time (B2) revealed a more dense foam-like surface morphology with fewer volcano areas providing higher thickness, which is mainly raised by reduction in discharge intensity. Also, a lower concentration of electrolyte elements (Si and Mn) was incorporated into the coating providing a brighter appearance. EIS results showed very high inner layer resistances for the coatings indicating this layer controls the overall corrosion performanc…