Search results for "Nanochemistry"
showing 10 items of 26 documents
Structural and Optical Properties of Novel Surfactant Coated TiO2Ag Based Nanoparticles
2010
Stable dispersions of surfactant-coated TiO2–Ag based nanoparticles in apolar medium have been prepared by performing sequentially the hydrolysis of titanium(IV) isopropoxide and the reduction of Ag? in the confined space of sodium bis(2-ethylhexyl)sulfosuccinate (NaAOT) reverse micelles. Depending on the sequence length, this novel procedure allowed the synthesis of semiconductor–metal nanoparticles, nominally indicated as TiO2/Ag, TiO2/Ag/TiO2, and TiO2/Ag/TiO2/ Ag, stabilized by a monolayer of oriented surfactant molecules. The structural characterization of these nanoparticles has been performed by High Resolution Transmission Electron Microscopy (HR-TEM), while optical properties were …
Polarized recombination of acoustically transported carriers in GaAs nanowires
2012
: The oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited electrons and holes in GaAs nanowires deposited on a SAW delay line on a LiNbO3 crystal. The carriers generated in the nanowire by a focused light spot are acoustically transferred to a second location where they recombine. We show that the recombination of the transported carriers occurs in a zinc blende section on top of the predominant wurtzite nanowire. This allows contactless control of the linear polarized emission by SAWs which is governed by the crystal structure. Additional polarization-resolved photoluminescence measurements were performed to investigate spin conservation d…
Nucleant layer effect on nanocolumnar ZnO films grown by electrodeposition
2013
Different ZnO nanostructured films were electrochemically grown, using an aqueous solution based on ZnCl2, on three types of transparent conductive oxides grow on commercial ITO (In2O3:Sn)-covered glass substrates: (1) ZnO prepared by spin coating, (2) ZnO prepared by direct current magnetron sputtering, and (3) commercial ITO-covered glass substrates. Although thin, these primary oxide layers play an important role on the properties of the nanostructured films grown on top of them. Additionally, these primary oxide layers prevent direct hole combination when used in optoelectronic devices. Structural and optical characterizations were carried out by scanning electron microscopy, atomic for…
Tailoring magnetic properties of electrodeposited thin films of the molecule-based magnet Cr5.5(CN)12 11.5H2O
2012
This paper reports on molecular-based magnetic thin films of Prussian blue analogues (PBA) with high critical temperatures composed of mixed-valence chromium cyanides. The thin films of PBA were synthesized by means of electrodeposition technique. Morphology and magnetic study are presented in a function of electrochemical deposition conditions. We present the electrochemical methods as a promising and effective tool for preparing molecular-based magnetic thin films of Prussian blue analogue.
Laser irradiation of ZnO:Al/Ag/ZnO:Al multilayers for electrical isolation in thin film photovoltaics
2013
Laser irradiation of ZnO:Al/Ag/ZnO:Al transparent contacts is investigated for segmentation purposes. The quality of the irradiated areas has been experimentally evaluated by separation resistance measurements, and the results are complemented with a thermal model used for numerical simulations of the laser process. The presence of the Ag interlayer plays two key effects on the laser scribing process by increasing the maximum temperature reached in the structure and accelerating the cool down process. These evidences can promote the use of ultra-thin ZnO:Al/ Ag/ZnO:Al electrode in large-area products, such as for solar modules. © 2013 Crupi et al.; licensee Springer.
Some aspects of formation and tribological properties of silver nanodumbbells.
2013
In this paper, metal nanodumbbells (NDs) formed by laser-induced melting of Ag nanowires (NWs) on an oxidized silicon substrate and their tribological properties are investigated. The mechanism of ND formation is proposed and illustrated with finite element method simulations. Tribological measurements consist in controllable real-time manipulation of NDs inside a scanning electron microscope (SEM) with simultaneous force registration. The geometry of NDs enables to distinguish between different types of motion, i.e. rolling, sliding and rotation. Real contact areas are calculated from the traces left after the displacement of NDs and compared to the contact areas predicted by the contact m…
Formation of Variously Shaped Gold Nanoparticles by Anabaena laxa
2017
Anew aspect of this study is the biocatalysis ability of Anabaena laxa—fresh-water strain—which to date has not been studied with respect to the formation of gold nanoparticles. The results of our study have shown that A. laxa is able to form gold nanoparticles (AuNPs) at good yields within 24 h of incubation at all three tested concentrations (0.1, 0.5 and 1 mM) of hydrogen tetrachloroaurate (III). After 24 h, nanoparticles were mostly localized in the growth medium, which significantly facilitates their isolation. However, the elongation of this process is accompanied by their concentration in the exopolysaccharide (EPS) layer of the cyanobacterial cells. There is a correlation between th…
From Single Molecules to Nanostructured Functional Materials: Formation of a Magnetic Foam Catalyzed by Pd@FexO Heterodimers
2017
Multicomponent nanostructures containing purely organic or inorganic as well as hybrid organic–inorganic components connected through a solid interface are, unlike conventional spherical particles, able to combine different or even incompatible properties within a single entity. They are multifunctional and resemble molecular amphiphiles, like surfactants or block copolymers, which makes them attractive for the self-assembly of complex structures, drug delivery, bioimaging, or catalysis. We have synthesized Pd@FexO heterodimer nanoparticles (NPs) to fabricate a macroporous, hydrophobic, magnetically active, three-dimensional (3D), and template-free hybrid foam capable of repeatedly separati…
Growth of low-density vertical quantum dot molecules with control in energy emission
2010
This article is distributed under the terms of the Creative Commons Attribution Noncommercial License.-- This article is part of the series 8th International Workshop on Epitaxial Semiconductors on Patterned Substrates and Novel Index Surfaces.
ORMOSIL thin films: Tuning mechanical properties via a nanochemistry approach
2006
The mechanical properties (hardness and elastic modulus) of organically modified silicate thin films can be finely tuned by varying the degree of alkylation and thus the fraction of six- and four-membered siloxane rings in the organosilica matrix. This opens the way to large tunability of parameters that are of crucial practical importance for films that are finding increasing application in numerous fields ranging from microelectronics to chemical sensing.