Search results for "Nanotechnologie"
showing 10 items of 211 documents
Deposition and characterization of cold sprayed nanocrystalline NiTi
2011
International audience; Binary 50Ni–50Ti mixture was prepared by mechanical alloying from elemental powders. After 48 h of milling, the nanocrystalline B2-NiTi powder was produced. Then, this as-milled powder was deposited by cold spraying in order to produce a target which can be used to create thin films by magnetron sputtering technique. The objective is to improve the electrical characterizations of the NiTi/SiO2/Si M.O.S structures. Themorphology evolution of the powder particles, the phase identification and the alloying evolution process as function of milling time were studied using scanning electron microscopy, X-ray diffraction and transmission electron microscopy. In addition, th…
Detection and quantification of lung cancer biomarkers by a micro-analytical device using a single metal oxide-based gas sensor
2018
International audience; The analysis of exhaled volatile organic compounds (VOCs) related to lung cancer is a very promising wayin medical diagnosis because it is non-invasive and much less expensive than traditional medical analysisused so far. In that sense, a silicon micro-analytical platform consisting of a micro-preconcentrator cou-pled to a silicon spiral gas chromatographic micro-column was built, and a metal oxide-based gas sensorwas used as a miniaturized gas detector. This micro-fabricated device was successfully tested to selec-tively detect low concentrations of VOCs considered as lung cancer biomarkers, within a few minuteseven in presence of high concentrations of water vapor …
Guest Effect on Nanopatterned Spin-Crossover Thin Films
2011
International audience; Nanopatterned thin films of the metal–organic framework {Fe(bpac)[Pt(CN)4]} (bpac=bis(4‐pyridyl)acetylene) are elaborated by the combination of a sequential assembly process and a lithographic method. Raman microspectroscopy is used to probe the temperature dependence of the spin state of the iron(II) ions in the films (40–90 nm in thickness), and reveals an incomplete but cooperative spin transition comparable to that of the bulk material. Adsorption/desorption of pyridine guest molecules is found to have a substantial influence on the spin‐crossover properties of the thin layers. This interplay between host–guest and spin‐crossover properties in thin films and nano…
Polymorphism of Two-Dimensional Halogen Bonded Supramolecular Networks on a Graphene/Iridium(111) Surface
2017
bibtex: ISI:000393443200020 bibtex\location:'1155 16TH ST, NW, WASHINGTON, DC 20036 USA',publisher:'AMER CHEMICAL SOC',type:'Article',affiliation:'Sicot, M (Reprint Author), Univ Lorraine, CNRS, Inst Jean Lamour, UMR 7198, BP 70239, F-54506 Vandoeuvre Les Nancy, France. Sicot, Muriel; Kierren, Bertrand; Fagot-Revurat, Yannick; Moreau, Luc; Granet, Julien; Malterre, Daniel, Univ Lorraine, CNRS, Inst Jean Lamour, UMR 7198, BP 70239, F-54506 Vandoeuvre Les Nancy, France. Tristant, Damien; Gerber, Iann C., Univ Toulouse, CNRS, INSA, LPCNO,UPS, 135 Ave Rangueil, F-31077 Toulouse, France. Tristant, Damien, Univ Toulouse, CNRS, CEMES, UPR 8011, 29 Rue Jeanne Marvig,BP 94347, F-31055 Toulouse, Fran…
On the possibility of synthesizing multilayered coatings in the (Ti,Al)N system by RGPP: A microstructural study
2019
International audience; Radiofrequency magnetron sputtering combined with reactive gas pulsing process was used to synthesize two titanium aluminum nitride multilayer films using a periodically controlled nitrogen flow rate changing from 0.4 to 1 sccm (sample S04-1) and from 0 to 1 sccm (sample S0-1). A metallic TiAl buffer layer was deposited on the etched substrates before the deposition to enhance their adhesion. The films were characterized using mainly transmission electron microscopy and electron diffraction. The role of the crystallinity of the buffer TiAl metallic layer deposited before gas introduction on the growth orientations is emphasized. It is shown that the formation of a mu…
Thermo-optic control of dielectric-loaded plasmonic waveguide components
2010
International audience; We report preliminary results on the development of compact (length 20%) is demonstrated with MZI-and WRR-based components, and efficient (similar to 30%) rerouting is achieved with DC switches. (C) 2010 Optical Society of America
Design and operation of CMOS-compatible electron pumps fabricated with optical lithography
2017
We report CMOS-compatible quantized current sources (electron pumps) fabricated with nanowires (NWs) on 300mm SOI wafers. Unlike other Al, GaAs or Si based metallic or semiconductor pumps, the fabrication does not rely on electron-beam lithography. The structure consists of two gates in series on the nanowire and the only difference with the SOI nanowire process lies in long (40nm) nitride spacers. As a result a single, silicide island gets isolated between the gates and transport is dominated by Coulomb blockade at cryogenic temperatures thanks to the small size and therefore capacitance of this island. Operation and performances comparable to devices fabricated using e-beam lithography is…
Near-field probing of active photonic-crystal structures
2002
We report a study of the optical near field of an active integrated component operating near the 1.55-mum telecommunications wavelength. The device is based on a two-dimensional photonic crystal etched in a suspended InP membrane. Topographic as well as optical information is collected by use of a scanning near-field optical microscope in collection mode, providing information about the local distribution of the losses.
Optical Probing (EOFM/TRI): A large set of complementary applications for ultimate VLSI
2013
International audience; Electro Optical Techniques (EOFM: Electro Optical Frequency Mapping and EOP: Electro Optical Probing) and Dynamic Light Emission Techniques (TRE: Time Resolved Emission and TRI: Time Resolved Imaging) are dynamic optical probing techniques widely used at IC level for design debug and defect localization purpose. They can pinpoint the origin of timing issue or logic fault in up to date CMOS devices. Each technique has its advantages and its drawbacks allowing a common set of applications and more specific ones. We have been involved in the development of the most advanced techniques related to EOFM and TRI on various devices (down to 28nm technology). What we can expe…
Silica-coated superparamagnetic nanoparticles as contrast agent for magnetic resonance imaging: Synthesis and physicological charaterizations
2015
Superparamagnetic iron oxide nanoparticles (SPIONs) have received a growing interest for various biomedical applications due to their interesting magnetic properties. Herein, we report a method for facile synthesis of colloidal silica-coated superparamagnetic iron oxide nanoparticles (Si-SPIONs). The polyvinyl alcohol (PVA)-SPIONs were successfully prepared and then coated with silica by the modified Stober method. The obtained Si-SPIONs are highly monodisperse with uniform morphology. Notably, comparing to uncoated SPIONs, silica coated ones show colloidal stability region at physiological pH which is applicable in biomedical applications and synthesis at the scale of grams was easily obta…