Search results for "Nondestructive"
showing 10 items of 86 documents
Bibliometric insights into the spectroscopy research field: A food science and technology case study
2019
The food industry is in need of analytical solutions to maintain high quality and safety standards during the entire food production chain. Spectroscopy applications are targeted as a major solution due to its cost-effective, simple, efficient and multiparametric nature. Bibliometric studies provide a critical evaluation of the status of a research topic through the quantification of measurable outcomes of research activity. The main aim of this study was to use a bibliometric approach to the evaluation of the current status of the spectroscopy research applied to food science and technology. The critical evaluation of the results showed the most commonly used spectroscopy applications as w…
Robotic path planning for non-destructive testing of complex shaped surfaces
2015
The requirement to increase inspection speeds for non-destructive testing (NDT) of composite aerospace parts is common to many manufacturers. The prevalence of complex curved surfaces in the industry provides significant motivation for the use of 6 axis robots for deployment of NDT probes in these inspections. A new system for robot deployed ultrasonic inspection of composite aerospace components is presented. The key novelty of the approach is through the accommodation of flexible robotic trajectory planning, coordinated with the NDT data acquisition. Using a flexible approach in MATLAB, the authors have developed a high level custom toolbox that utilizes external control of an industrial …
Compressive sensing for direct time of flight estimation in ultrasound-based NDT
2017
This paper presents an approach for estimation of ultrasonic time-of-flight (TOF) within a Non Destructive Testing (NDT) and Structural Health Monitoring (SHM) context. The presented method leverages recent advances in the field of Compressive Sensing (CS), which makes use of sparsity in a transform domain of a signal in order to reduce the number of samples required to store it. CS achieves this through a two key ideas: random matrix projections, and l1-penalised linear regression. In this case, sparsity arises from the observation that in a pulse-echo ultrasound test, the number of echoes is relatively small compared to the number of measurement points in a waveform. This sparsity is evid…
Noncontact Air-Coupled Guided Wave Ultrasonics for Detection of Thinning Defects in Aluminum Plates
2001
Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of thinning defects simulating hidden corrosion in thin aluminum plates. The proposed approach uses micromachined gas (air)-coupled capacitive transducers for the noncontact generation and detection of guided plate waves. Interesting features in the dispersive behavior of select…
New method for real-time dynamic focusing through interfaces
2013
[EN] In nondestructive evaluation (NDE) a coupling medium (wedge) is frequently inserted between the array probe and the object being evaluated. In this situation, focal law computing is complicated by the refraction effects at the interface. Furthermore, there are not known techniques to perform dynamic focusing by hardware in these conditions. This work addresses these problems by following a two-step procedure. First, a virtual array that operates in a single medium with nearly equivalent time-of-flight to the foci is obtained. Then, simple hardware is proposed to perform dynamic focusing in real-time. It operates with arrays of any geometry as required by the virtual array in presence o…
High-velocity Impact Location on Aircraft panels Using Macro-fiber Composite piezoelectric Rosettes
2010
In this article, an approach based on an array of macro-fiber composite (MFC) transducers arranged as rosettes is proposed for high-velocity impact location on isotropic and composite aircraft panels. Each rosette, using the directivity behavior of three MFC sensors, provides the direction of an incoming wave generated by the impact source as a principal strain angle. A minimum of two rosettes is sufficient to determine the impact location by intersecting the wave directions. The piezoelectric rosette approach is easier to implement than the well-known time-of-flight-based triangulation of acoustic emissions because it does not require knowledge of the wave speed in the material. Hence, th…
PAUT inspection of complex-shaped composite materials through six DOFs robotic manipulators
2015
The requirement to increase inspection speeds for the non-destructive testing (NDT) of composite aerospace parts is common to many manufacturers. The prevalence of complex curved surfaces in the industry provides significant motivation for the use of six-axis robots for the deployment of NDT probes in these inspections. The IntACom project, developed by TWI Technology Centre (Wales) and supported by a number of major aerospace partners and the Welsh government, has produced a prototype robotic NDT system. The prototype system is capable of inspecting complex-geometry composite components with great time savings. Two six-axis robotic arms deploy end effectors carrying phased array ultrasonic…
Backcalculation of airport pavement moduli and thickness using the Lévy Ant Colony Optimization Algorithm
2016
Interpretation of NDTdata is crucial in any Airport Pavement Management System (APMS), in order to implement strategies to maintain airport pavementssince they allow to estimate their remaining life and related maintenance needs and activities. In this paper, the AntColony Optimization algorithmwasused for backcalculation of pavement moduli from surface deflection data. The algorithm’s performances are illustrated and improvement in prediction quality is demonstrated both in terms of goodness of fitness and computational effort. Moreover, it is proved that the proposed algorithm is also able to predict layer thicknesses, taking into account their variation too.
Influence of Welding Time on Tensile-Shear Strength of Linear Friction Welded Birch (Betula pendula L.) Wood
2015
Linear friction welding of wood is a bonding process applied to wood and during which a stiff bond line is formed by the softening and rehardening of wood components to form a composite material composed mainly of wood fibres embedded in a modified lignin matrix. Unfortunately, the bonds tend to spontaneously delaminate or lose their strength when exposed to moist conditions. Some approaches were previously applied to overcome this problem, but so far a suitable solution has not been found. This paper presents results of applying post-welding thermal modification to reduce the moisture sensitivity of welded wood. The experiments included welding of birch wood, thermal modification under sup…
Evaluation of interlaminar delaminations in titanium-graphite fibre metal laminates by infrared NDT techniques
2018
Abstract Fibre Metal Laminates (FMLs) describe a number of aerospace-grade layered structural materials where thin metal alloy foils are interleaved with Fibre Reinforced Polymer (FRP) plies. Such material hybridisation at the layer meso-scale poses a challenge for non-destructive testing (NDT). On the other hand, the need for NDT inspection of FMLs arises due to the potential development of interlayers disbonds, both during fabrication or in-service. This work describes the successful implementation of two Infrared-NDT approaches to evaluate a defected FML panel made of Titanium/Graphite (Ti-Gr). One technique is based on the modulation of the deployed heat from a low-cost halogen lamp, to…